6A100

6A05 THRU 6A100 6.0 AMPS. Silicon Rectifiers Voltage Range 50 to 1000 Volts Current 6.0 Amperes Features Low forward voltage drop High current capability High reliability High surge current capability R-6 Mechanical Data Cases: Molded plastic Epoxy: UL 94V-O rate flame retardant Lead: Axial leads, solderable per MILSTD-202, Method 208 guaranteed Polarity: Color band denotes cathode end High temperature soldering guaranteed: 260oC/10 seconds/.375”,(9.5mm) lead lengths at 5 lbs., (2.3kg) tension Weight: 1.65 grams Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol 6A05 6A10 6A20 6A40 6A60 6A80 6A100 Units Type Number Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V VRRM Maximum RMS Voltage 35 70 140 280 420 560 700 V VRMS Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V VDC Maximum Average Forward Rectified Current .375 (9.5mm) Lead Length @TA = 60℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 6.0A Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=100℃ Maximum Full Load Reverse Current, Full Cycle Average .375”(9.5mm) Lead Length @TA=75℃ Typical Junction Capacitance Operating Temperature Range Storage Temperature Range ( Note 1 ) Typical Thermal Resistance ( Note 2 ) I(AV) IFSM VF IR 6.0 250 0.95 10 400 50 90 35 -65 to +150 -65 to +150 A A V uA uA uA pF ℃/W ℃ ℃ HTIR Cj RθJA TJ TSTG Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C. 2. Mount on Cu-Pad Size 16mm x 16mm on P.C.B. - 522 - RATINGS AND CHARACTERISTIC CURVES (6A05 THRU 6A100) FIG.1- MAXIMUM OUTPUT CURRENT VS AMBIENT TEMPERATURE AVERAGE FORWARD CURRENT AMPERES 6.5 6 Single PhaseHalf Wave 60Hz Resistive of Inductive Load Ground plane 16mm x 16mm Copper surface area PC BOARD Recommanded PC Board 2 PC BOARD 1 Mounting 5 4 3 Standard PC Board Mounting 0 20 40 60 80 100 120 o 0 140 160 180 200 AMBIENT TEMPERATURE. ( C) FIG.2- TYPICAL FORWARD CHARACTERISTICS 100 50 FIG.3- TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS FORWARD CURRENT. (A) 10 5 INSTANTANEOUS REVERSE CURRENT. ( A) 10 Tj=100 0C 1 0.5 Tj=25oC Pulse Width=300 s 1% Duty Cycle 1 0.1 0.05 0.1 Tj=25 0C 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 FORWARD VOLTAGE. (V) 0.01 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.4- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 300 1000 FIG.5- TYPICAL JUNCTION CAPACITANCE PEAK FORWARD SURGE CURRENT. (A) 200 JUNCTION CAPACITANCE.(pF) 250 500 Tj=25 C 150 100 O 200 Tj=25 0C 100 50 50 0 1 5 10 50 100 NUMBER OF CYCLES AT 60Hz 10 1 10 REVERSE VOLTAGE. (V) 50 100 - 523 -