ABS4

ABS2 - ABS10 Single Phase 1.0 AMP. Glass Passivated Bridge Rectifiers ABS 0.177(4.5) 0.169(4.3) 0.252(6.4) 0.236(6.0) 0.010(0.25) 0.006(0.15) Features Glass passivated junction Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique High temperature soldering guaranteed: 260oC / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension Small size, simple installation Pure tin plated terminal , Lead free. Leads solderable per MIL-STD-202, Method 208 High surge current capability 0.136(3.45) 0.128(3.25) 0.161(4.1) 0.154(3.9) 0.002(0.05) 0.006(0.15) 0.028(0.7) 0.024(0.6) 0.028(0.7) 0.012(0.3) 0.059(1.50) MAX. DETAIL "A", SCALE=20/1 0.056(1.42) 0.048(1.22) 0.006(0.15) 0.002(0.05) 0.20(5.1) 0.193(4.9) A 0.033(0.85) 0.026(0.65) Dimensions in inches and (millimeters) Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Maximum Ratings and Electrical Characteristics Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current On glass-epoxy P.C.B. On aluminum substrate Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 0.4A Maximum DC Reverse Current @ TA=25 oC o at Rated DC Blocking Voltage @ TA=125 C Typical Thermal resistance Junction to Lead On aluminum substrate On Glass-Epoxy substrate Operating Temperature Range Storage Temperature Range Symbol VRRM VRMS VDC I(AV) IFSM VF IR RθJL RθJA TJ TSTG ABS2 ABS4 ABS6 ABS8 ABS10 Units 200 400 600 800 1000 V 140 280 420 560 700 V 200 400 600 800 1000 V 0.8 1.0 30 095 10 150 25 62.5 80 -55 to +150 -55 to +150 A A V uA uA o C/W o o C C Version: A06 0~10 O RATINGS AND CHARACTERISTIC CURVES (ABS2 THRU ABS10) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 1.6 1.4 100 FIG.2- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT AVERAGE FORWARD CURRENT. (A) 1.2 SIN 1.0 0.8 0.6 0.4 0.2 0 0 20 40 ALUMINA SUBSTRATE 50.8mm X 50.8mm SOLDERING LAND 1mm X 1mm CONDUCTOR LAYER 20 mm SUBSTRATE THICKNESS 0.64mm INSTANTANEOUS REVERSE CURRENT. ( A) 10 Tj=100 0C 1 Tj=75 0C 0.1 Tj=25 0C 60 80 100 O 120 140 160 AMBIENT TEMPERATURE. ( C) FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 35 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) PEAK FORWARD SURGE CURRENT. (A) 30 1000 25 600 20 15 JUNCTION CAPACITANCE.(pF) FIG.4- TYPICAL JUNCTION CAPACITANCE IFSM 10ms 10ms 500 Tj=25 0C 10 5 0 Ta=40 C 1 Cycle 400 300 200 100 0 0.1 NON-REPETITIVE, Single Half Sine-Wave SINE WAVE, Method) (JEDEC Tj = 25OC BEFORE SURGE CURRENT IS APPLIED 1 10 NUMBER OF CYCLES (CYCLE) 100 FIG.5- TYPICAL FORWARD CHARACTERISTICS 50 0.5 1 2 10 50 100 5 20 REVERSE VOLTAGE. (V) 200 500 800 INSTANTANEOUS FORWARD CURRENT. (A) 10 1 0.1 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 FORWARD VOLTAGE. (V) Version: A06