BZW06_06

BZW06 SERIES 600 Watts Transient Voltage Suppressor Diodes DO-15 Features UL Recognized File # E-96005 Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Exceeds environmental standards of MIL-STD-19500 600W surge capability at 10 x 100 us waveform, duty cycle: 0.01% Excellent clamping capability Low zener impedance Fast response time: Typically less than 1.0ps from 0 volts to VBR for unidirectional and 5.0 ns for bidirectional Typical IR less than 1uA above 10V High temperature soldering guaranteed: 260oC / 10 seconds / .375”,(9.5mm) lead length / 5lbs.,(2.3kg) tension Dimensions in inches and (millimeters) Mechanical Data Case: Molded plastic Lead: Axial leads, solderable per MIL-STD-202, Method 208 Polarity: Color band denotes cathode except bipolar Weight: 0.34gram Maximum Ratings and Electrical Characteristics (TA = 25 oC) Type Number Peak Pulse Power Dissipation at TA=25 C, Tp=1ms (Note) o Steady State Power Dissipation at TL=75 oC Lead Lengths .375”, 9.5mm (Note 2) Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note 3) Junction to leads Junction to ambient on printed circuit. L lead=10mm Operating and Storage Temperature Range Symbol PPP PD IFSM RθJL RθJA TJ, TSTG Value Minimum 600 1.7 100 60 100 -65 to + 175 Units Watts Watts Amps o o C/W C/W o C Notes: For a surge greater than the maximum values, the diode will fall in short-circuit. Version: A06 RATINGS AND CHARACTERISTIC CURVES (BZW06 SERIES) FIG.1- PEAK PULSE POWER VERSUS EXPONENTIAL PULSE DURATION Ppp(w) 1E5 TJ Initial=250C 100 FIG.2- PEAK PULSE POWER DISSIPATION VERSUS INITIAL JUNCTION TEMPERATURE (PRINTED CIRCUIT BOARD) % 1E4 80 1E3 60 40 1E2 20 TJ Initial (0C) Tp (ms) EXPO. 1E1 0.001 0.01 0.1 1 10 100 0 0 20 40 60 80 100 120 140 160 180 200 FIG.3- PULSE WAVEFORM 150 PEAK PULSE CURRENT - % tr=10msec. 100 PEAK VALUE lPPM PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of lPPM FIG.4-CLAMPING VOLTAGE VERSUS PEAK PULSE CURRENT. EXPONENTIAL WAVEFORM tp-200 s tp-1ms tp-10m 10,000 50 HALF VALUE- lPPM 2 10/1000 sec. WAVEFORM as DEFINED by R.E.A. VCL(V) % IPP TJ Initial=250C BZW06-376 BZW06-186 100 50 0 0 td 100 t, TIME, ms tr tp tp