FR103G

FR101G THRU FR107G 1.0 AMP. Glass Passivated Fast Recovery Rectifiers Voltage Range 50 to 1000 Volts Current 1.0 Ampere Features Low forward voltage drop High current capability High reliability High surge current capability DO-41 Mechanical Data Cases: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Axial leads, solderable per MILSTD-202, Method 208 guaranteed Polarity: Color band denotes cathode end High temperature soldering guaranteed: 260℃/10 seconds/.375”,(9.5mm) lead lengths at 5 lbs.,(2.3kg) tension Weight: 0.34 gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol FR FR Type Number 101G 102G Maximum Recurrent Peak Reverse Voltage 50 100 VRRM Maximum RMS Voltage 35 70 VRMS Maximum DC Blocking Voltage 50 100 VDC Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length @TA = 75℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 1.0A Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=125℃ Maximum Reverse Recovery Time ( Note 1 ) Typical Junction Capacitance ( Note 2 ) FR FR FR FR FR Units 103G 104G 105G 106G 107G 200 140 200 400 280 400 1.0 30 1.3 5.0 100 600 420 600 800 1000 560 700 800 1000 V V V A A V uA uA nS pF O C/W ℃ ℃ I(AV) IFSM VF IR Trr Cj RθJA TJ 250 10 Typical Thermal Resistance ( Note 3 ) 65 Operating Temperature Range -65 to +150 Storage Temperature Range TSTG -65 to +150 Notes: 1. Reverse Recovery Test Conditions: I F=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 3. Mount on Cu-Pad Size 5mm x 5mm on P.C.B. 150 500 - 436 - RATINGS AND CHARACTERISTIC CURVES (FR101G THRU FR107G) FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50W NONINDUCTIVE 10W NONINDUCTIVE +0.5A (-) DUT (+) 50Vdc (approx) (-) PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) (+) 0 -0.25A trr NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms -1.0A 1cm SET TIME BASE FOR 5/ 10ns/ cm FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE 1.50 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375" (9.5mm) Lead Length FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 50 1.25 PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 40 1.00 30 0.75 Tj=25 0C 20 0.50 10 8.3ms Single Half Sine Wave JEDEC Method 0.25 0 0 25 50 75 100 o 0 125 150 175 AMBIENT TEMPERATURE. ( C) 1 2 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz FIG.4- TYPICAL JUNCTION CAPACITANCE 100 FIG.5- TYPICAL FORWARD CHARACTERISTICS 10 INSTANTANEOUS FORWARD CURRENT. (A) JUNCTION CAPACITANCE.(pF) 1.0 Tj=25 0C 10 0.1 Tj=25oC Pulse Width=300 s 1% Duty Cycle 1 1 10 REVERSE VOLTAGE. (V) 100 .01 .4 .6 .8 1.0 1.2 1.4 1.6 FORWARD VOLTAGE. (V) - 437 -