FR151G

FR151G THRU FR157G 1.5 AMPS. Glass Passivated Fast Recovery Rectifiers Voltage Range 50 to 1000 Volts Current 1.5 Amperes Features Low forward voltage drop High current capability High reliability High surge current capability DO-15 Mechanical Data Cases: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Axial leads, solderable per MILSTD-202, Method 208 guaranteed Polarity: Color band denotes cathode end High temperature soldering guaranteed: 260℃/10 seconds/.375”,(9.5mm) lead lengths at 5 lbs.,(2.3kg) tension Weight: 0.40 gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol FR FR Type Number 151G 152G Maximum Recurrent Peak Reverse Voltage 50 100 VRRM Maximum RMS Voltage 35 70 VRMS Maximum DC Blocking Voltage 50 100 VDC Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length @TA = 55℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 1.5A Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=125℃ Maximum Reverse Recovery Time ( Note 1 ) Typical Junction Capacitance ( Note 2 ) Typical Thermal Resistance ( Note 3 ) Operating Temperature Range Storage Temperature Range FR FR FR FR FR Units 153G 154G 155G 156G 157G 200 140 200 400 280 400 1.5 50 1.3 5.0 100 600 420 600 800 1000 560 700 800 1000 V V V A A V uA uA nS pF O I(AV) IFSM VF IR Trr Cj RθJA TJ 150 TSTG Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 3. Mount on Cu-Pad Size 10mm x 10mm on P.C.B. 250 20 60 -65 to +150 -65 to +150 500 C/W ℃ ℃ - 442 - RATINGS AND CHARACTERISTIC CURVES (FR151G THRU FR157G) FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50W NONINDUCTIVE 10W NONINDUCTIVE +0.5A (-) DUT (+) 50Vdc (approx) (-) PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) (+) 0 -0.25A trr NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms -1.0A 1cm SET TIME BASE FOR 5/ 10ns/ cm FIG.3- TYPICAL FORWARD CHARACTERISTICS 10 100 FIG.2- TYPICAL JUNCTION CAPACITANCE INSTANTANEOUS FORWARD CURRENT. (A) 1.0 JUNCTION CAPACITANCE.(pF) Tj=25 0C 10 0.1 Tj=25oC Pulse Width=300 s 1% Duty Cycle .01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 11 1 5 10 50 100 FORWARD VOLTAGE. (V) REVERSE VOLTAGE. (V) FIG.5- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 60 1.50 FIG.4- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT AMPERES PEAK FORWARD SURGE CURRENT. (A) 50 Tj=55 0C 1.25 40 1.00 30 20 .75 .50 .25 10 8.3ms Single Half Sine Wave JEDEC Method Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375"(9.5mm) Lead Length 0 1 2 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz 0 0 25 50 75 100 o 125 150 175 AMBIENT TEMPERATURE. ( C) - 443 -