FR201

FR201 - FR207 2.0 AMPS. Fast Recovery Rectifiers DO-15 Features High efficiency, Low VF High current capability High reliability High surge current capability Low power loss. Mechanical Data Cases: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Pure tin plated, Lead free., solderable per MIL-STD-202, Method 208 guaranteed Polarity: Color band denotes cathode end High temperature soldering guaranteed: 260 oC /10 seconds/.375”,(9.5mm) lead lengths at 5 lbs.,(2.3kg) tension W eight: 0.40 gram Dimensions in inches and (millimeters) Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% FR Symbol FR Type Number 201 202 Maximum Recurrent Peak Reverse Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 Maximum Average Forward Rectified Current.375”(9.5mm) Lead Length o @TA = 55 C Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 2.0A Maximum DC Reverse Current @ TA=25 oC at Rated DC Blocking Voltage @ TA=125 oC Maximum Reverse Recovery Time ( Note 1 ) Typical Junction Capacitance ( Note 2 ) Typical Thermal Resistance Maximum Ratings and Electrical Characteristics FR 203 FR 204 FR 205 FR 206 FR Units 207 200 140 200 400 280 400 2.0 60 1.2 5.0 150 600 420 600 800 1000 560 700 800 1000 V V V I(AV) IFSM VF IR Trr Cj RθJA RθJL RθJC TJ A A V uA uA nS pF o 150 Operating Temperature Range Storage Temperature Range TSTG 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A Notes: 2. Measured at 1 MHz and Applied Reverse Voltage of 4..0 Volts D.C. 3. Mount on Cu-Pad Size 10mm x 10mm on P.C.B.. 250 30 60 18 5 -65 to +150 -65 to +150 500 C/W o o C C Version: A06 RATINGS AND CHARACTERISTIC CURVES (FR201 THRU FR207) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT AMPERES 2.0 1000 FIG.2- TYPICAL REVERSE CHARACTERISTICS PER LEG 1.5 INSTANTANEOUS REVERSE CURRENT. ( A) 100 Tj=125 0C 1.0 0.5 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375"(9.5mm) Lead Length 0 25 50 75 100 125 o AMBIENT TEMPERATURE. ( C) 150 175 10 Tj=75 0C 0 1.0 Tj=25 0C 70 FIG.3- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT. (A) 60 50 40 30 20 10 0 1 2 8.3ms Single Half Sine Wave JEDEC Method 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.5- TYPICAL FORWARD CHARACTERISTICS 20 10 5 10 20 NUMBER OF CYCLES AT 60Hz 50 100 INSTANTANEOUS FORWARD CURRENT. (A) 3.0 FIG.4- TYPICAL JUNCTION CAPACITANCE 100 1.0 JUNCTION CAPACITANCE.(pF) 60 0.3 40 0.1 Tj=25 0C 20 .03 Tj=25oC Pulse Width=300 s 1% Duty Cycle .4 .6 .8 1.0 1.2 1.4 1.6 1.8 10 1 2 4 6 10 20 40 60 100 REVERSE VOLTAGE. (V) .01 FORWARD VOLTAGE. (V) FIG.6- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50W NONINDUCTIVE 10W NONINDUCTIVE +0.5A (-) DUT (+) 50Vdc (approx) (-) PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) (+) 0 -0.25A trr NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms -1.0A 1cm SET TIME BASE FOR 5/ 10ns/ cm Version: A06