FR207G

FR201G - FR207G 2.0 AMPS. Glass Passivated Fast Recovery Rectifiers DO-15 Features G lass passivated chip junction. H igh efficiency, Low VF H igh current capability H igh reliability H igh surge current capability L ow power loss M echanical Data C ases: Molded plastic E poxy: UL 94V-0 rate flame retardant L ead: Pure tin plated, Lead free., solderable per MIL-STD-202, Method 208 guaranteed P olarity: Color band denotes cathode end H igh temperature soldering guaranteed: o 260 C /10 seconds/.375”,(9.5mm) lead lengths at 5 lbs.,(2.3kg) tension M ounting position: Any W eight: 0.40 gram Dimensions in inches and (millimeters) R ating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% M aximum Ratings and Electrical Characteristics o T ype Number M aximum Recurrent Peak Reverse Voltage M aximum RMS Voltage M aximum DC Blocking Voltage M aximum Average Forward Rectified Current .375”(9.5mm) Lead Length o @T A = 5 5 C P eak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) M aximum Instantaneous Forward Voltage @ 2.0A o M aximum DC Reverse Current @ T A=25 C o a t Rated DC Blocking Voltage @ T A=125 C Maximum Reverse Recovery Time ( Note 1 ) Typical Junction Capacitance ( Note 2 ) Typical Thermal Resistance O perating Temperature Range S ymbol V RRM V RMS V DC I(AV) IFSM VF IR T rr Cj R θJA TJ FR FR FR FR FR FR FR Units 201G 202G 203G 204G 205G 206G 207G 50 35 50 100 70 100 200 140 200 400 280 400 2 .0 55 1 .3 600 420 600 800 1000 560 700 800 1000 V V V A A V uA uA nS pF o 1 50 S torage Temperature Range T STG 1. Reverse Recovery Test Conditions: IF=0.5A, IR =1.0A, IRR =0.25A N otes: 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 3. Mount on Cu-Pad Size 10mm x 10mm on P.C.B. 250 20 60 -65 to +150 -65 to +150 5 .0 100 500 C/W o C o C Version: A06 RATINGS AND CHARACTERISTIC CURVES (FR201G THRU FR207G) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT AMPERES 3.0 1000 FIG.2- TYPICAL REVERSE CHARACTERISTICS PER LEG 2.5 2.0 INSTANTANEOUS REVERSE CURRENT. ( A) 100 1.5 Tj=125 0C 10 Tj=75 0C 1.0 0.5 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375"(9.5mm) Lead Length 0 0 25 50 75 100 125 o AMBIENT TEMPERATURE. ( C) 150 175 1 Tj=25 0C 60 FIG.3- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT. (A) 50 Tj=55 0C 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 40 30 20 FIG.5- TYPICAL FORWARD CHARACTERISTICS 10 10 0 1 2 4 100 FIG.4- TYPICAL JUNCTION CAPACITANCE INSTANTANEOUS FORWARD CURRENT. (A) 6 8 10 20 NUMBER OF CYCLES AT 60Hz 40 60 80 100 1.0 JUNCTION CAPACITANCE.(pF) 8.3ms Single Half Sine Wave JEDEC Method Tj=25 0C 10 0.1 Tj=25oC Pulse Width=300 s 1% Duty Cycle 11 1 10 5 REVERSE VOLTAGE. (V) 50 100 .01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 FORWARD VOLTAGE. (V) FIG.6- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50W NONINDUCTIVE 10W NONINDUCTIVE +0.5A (-) DUT (+) 50Vdc (approx) (-) PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) (+) 0 -0.25A trr NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms -1.0A 1cm SET TIME BASE FOR 5/ 10ns/ cm Version: A06