FR301

FR301 - FR307 3.0 AMPS. Fast Recovery Rectifiers DO-201AD Features H igh efficiency, Low VF H igh current capability H igh reliability H igh surge current capability L ow power loss. M echanical Data C ases: Molded plastic E poxy: UL 94V-0 rate flame retardant L ead: Pure tin plated, Lead free., solderable per MIL-STD- 202, Method 208 guaranteed P olarity: Color band denotes cathode end H igh temperature soldering guaranteed: 260 oC/10 seconds/.375”,(9.5mm ) lead lengths at 5 lbs.,(2.3kg) tension W eight: 1.2 grams Dimensions in inches and (millimeters) M aximum Ratings and Electrical Characteristics R ating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% T ype Number M aximum Recurrent Peak Reverse Voltage M aximum RMS Voltage M aximum DC Blocking Voltage M aximum Average Forward Rectified Current .375”(9.5mm) Lead Length o @T A = 5 5 C P eak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) M aximum Instantaneous Forward Voltage @ 3.0A o M aximum DC Reverse Current @ T A=25 C o at Rated DC Blocking Voltage @ T A=125 C M aximum Reverse Recovery Time ( Note 1) T ypical Junction Capacitance ( Note 2 ) T ypical Thermal resistance (Note 3) O perating Temperature Range S ymbol V RRM V RMS V DC I(AV) IFSM VF IR T rr Cj R θJA TJ FR 301 50 35 50 FR 302 100 70 100 FR 303 200 140 200 FR 304 400 280 400 3 .0 FR 305 600 420 600 FR 306 800 560 800 FR Units 307 1000 V 700 V 1000 V A 1 50 1 .2 5 1 50 150 250 60 40 -65 to +150 -65 to +150 500 A V uA uA nS pF o C/W o C o C S torage Temperature Range T STG 1. Reverse Recovery Test Conditions: IF=0.5A, IR =1.0A, IRR=0.25A N otes: 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 3. Mount on Cu-Pad Size 16mm x 16mm on P.C.B. Version: A06 RATINGS AND CHARACTERISTIC CURVES (FR301 THRU FR307) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT AMPERES 4 1000 FIG.2- TYPICAL REVERSE CHARACTERISTICS PER LEG INSTANTANEOUS REVERSE CURRENT. ( A) 3 100 Tj=125 0C 2 1 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375"(9.5mm) Lead Length 0 25 50 75 100 o 10 Tj=75 0C 0 125 150 175 AMBIENT TEMPERATURE. ( C) 1.0 Tj=25 0C FIG.3- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 150 PEAK FORWARD SURGE CURRENT. (A) 0.1 100 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 50 Tj=25 0C 8.3ms Single Half Sine Wave JEDEC Method FIG.5- TYPICAL FORWARD CHARACTERISTICS 20 10 10 1 INSTANTANEOUS FORWARD CURRENT. (A) 5 10 NUMBER OF CYCLES AT 60Hz 50 100 3 FIG.4- TYPICAL JUNCTION CAPACITANCE 100 1 JUNCTION CAPACITANCE.(pF) Tj=25 C 60 0 0.3 40 0.1 Tj=25oC Pulse Width=300 s 1% Duty Cycle 20 0.03 10 1 2 4 6 10 20 40 60 100 REVERSE VOLTAGE. (V) 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 FORWARD VOLTAGE. (V) FIG.6- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50W NONINDUCTIVE 10W NONINDUCTIVE +0.5A (-) DUT (+) 50Vdc (approx) (-) PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) (+) 0 -0.25A trr NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms -1.0A 1cm SET TIME BASE FOR 5/ 10ns/ cm Version: A06