GBL207

GBL201 THRU GBL207 Single Phase 2.0 AMPS. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 2.0 Amperes Features Glass passivated chip junction Ideal for printed circuit board High case dielectric strength Plastic material has Underwriters Laboratory Flammability Classification 94V-0 Typical IR less than 0.1µA High surge current capability High temperature soldering guaranteed: 260OC / 10 seconds / .375”, (9.5mm) lead lengths. C2.5 .799(20.3) .776(19.7) GBL .142(3.60) .130(3.30) .106(2.70) .091(2.30) .067(1.70) .051(1.30) .043(1.10) .035(0.90) AC .106(2.70) .091(2.30) .445(11.3) .421(10.7) .047(1.20) .031(0.80) .551(14.0) .512(13.0) .024(0.60) .016(0.40) Mechanical Data Case: Molded plastic body. Terminals: Plated leads solderable per MIL-STD-750, Method 2026. Weight: 0. 06 ounce, 1.7 grams Mounting position: Any 1 2 3 4 1 2 3 4 205(5.20) .205(5.20) .205(5.20) 189(4.80) .189(4.80) .189(4.80) Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol GBL GBL Type Number 201 202 Maximum Recurrent Peak Reverse Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 Maximum Average Rectified Output Current @ 50℃ Ambient Peak One Surge Current Overload Current Maximum Instantaneous Forward Voltage @ 1.0A Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=100℃ Typical Thermal Resistance Per Leg (Note) (Note) Typical Junction Capacitance Per Leg at 4.0V, 1MHz Operating Temperature Range Storage Temperature Range GBL GBL GBL GBL GBL Units 203 204 205 206 207 200 140 200 400 280 400 2.0 60 1.00 5.0 500 32 13 25 600 420 600 800 1000 560 700 800 1000 V V V A A V uA uA ℃/W pF I(AV) IFSM VF IR RθJA RθJL Cj TJ TSTG ℃ -55 to +150 ℃ -55 to + 150 Note: Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B with 0.47 x 0.47” (12 x 12mm) Copper Pads. - 720 - RATINGS AND CHARACTERISTIC CURVES (GBL201 THRU GBL207 ) FIG.1- DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.2-TYPICAL INSTANTANEOUS FORWARD CHARACTERISITCS 3.0 BRIDGE OUPUT FULL WAVE RECTIFIED CURRENT AVERES AMPERES 5.0 4.0 INSTANTANEOUS FORWARD CURRENT. (A) 2.5 2.0 1.5 1.0 0.5 0 3.0 2.0 1.0 0.9 0.8 0.7 0.5 0.3 0.2 0.1 0.07 0.05 0.03 0.02 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1 .4 0 50 100 O 150 AMBIENT TEMPERATURE. ( C) INSTANTANEOUS FORWARS VOLTAGE. (V) 10 FIG.3- TYPICAL REAK REVERSE VOLTAGE CHARACTERISTICS FORWARD SRGE CURRENT,AMPERES pk (HALFSINE-WAVE) FIG.4- MAXIMUM NON-REPETITEVE PEAK FORWARD SURGE CURRENT 70 INSTANTANEOUS REVERSE CURRENTMICROAMPERES 60 TJ =100 C 1 O 50 40 30 20 0.1 10 TJ= 25 C O 0 1 2 6 10 20 40 60 100 NO. OFCYCLES AT 60Hz 0.01 0 20 40 60 80 100 120 140 PERCENT OF PEAK REVERSE VOLTAGE - 721 -