GP1005

GP1001 THRU GP1007 10.0 AMPS. Glass Passivated Rectifiers Voltage Range 50 to 1000 Volts Current 10.0 Amperes Features Low forward voltage drop High current capability High reliability High surge current capability TO-220 Mechanical Data Cases: TO-220 molded plastic Epoxy: UL 94V-0 rate flame retardant Terminals: Leads solderable per MIL-STD202, Method 208 guaranteed Polarity: As marked High temperature soldering guaranteed: 260℃/10 seconds .16”,(4.06mm) from case. Weight: 2.24 grams PIN 1 PIN 3 Positive CT CASE PIN 2 Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol GP GP Type Number 1001 1002 Maximum Recurrent Peak Reverse Voltage 50 100 VRRM Maximum RMS Voltage 35 70 VRMS Maximum DC Blocking Voltage 50 100 VDC Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length @TC = 100℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @5.0A Maximum DC Reverse Current @ TC=25℃ at Rated DC Blocking Voltage Typical Junction Capacitance ( Note 1) Typical Thermal Resistance (Note 2) GP GP GP GP GP Units 1003 1004 1005 1006 1007 200 140 200 400 280 400 10.0 125 1.1 5.0 600 420 600 800 1000 560 700 800 1000 V V V A A V uA I(AV) IFSM VF IR 30 pF ℃/W 3.0 Operating and Storage Temperature Range TJ ,TSTG ℃ - 65 to + 150 Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 2. Thermal Resistance from Junction to Case Mounted on Heatsink size 2” x 3” x 0.25” Al-Plate RθJC Cj - 550 - RATINGS AND CHARACTERISTIC CURVES (GP1001 THRU GP1007) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 12 FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 175 PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 150 125 100 75 50 25 0 8.3ms Single Half Sine Wave JEDEC Method 10 8 6 Single Phase Half Wave 60Hz Resistive of Inductive Load 4 2 0 50 CASE TEMPERATURE. ( C) o 100 150 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG 400 200 100 FIG.4- TYPICAL REVERSE CHARACTERISTICS PER LEG 100 40 INSTANTANEOUS FORWARD CURRENT. (A) 40 20 10 INSTANTANEOUS REVERSE CURRENT. ( A) 10 Tj=125 0C 4 2 1 4 2 1 Tj=25oC Pulse Width=300 s 1% Duty Cycle Tj=25 0C 0.4 0.2 0.1 0.4 0.2 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0 20 40 60 80 100 120 140 FORWARD VOLTAGE. (V) PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.5- TYPICAL JUNCTION CAPACITANCE 120 JUNCTION CAPACITANCE.(pF) 100 80 60 40 f=10 MHz Vsig 50Mvp-p Tj=25 0C 20 0 0.1 0.5 1 4 10 40 100 400 1000 REVERSE VOLTAGE. (V) - 551 -