GP15B

GP15A THRU GP15M 1.5 AMPS. Glass Passivated Junction Plastic Rectifiers Voltage Range 50 to 1000 Volts Current 1.5 Amperes Features High temperature metallurgically bonded construction Plastic material used carries Underwriters Laboratory Classification 94V-O Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 1.5 amperes operation at TA=55oC and with no thermal runaway Typical IR less than 0.1 uA High temperature soldering guaranteed: 350oC / 10 seconds, 0.375”(9.5mm) lead length, 5 lbs. (2.3kg) tension DO-15 Mechanical Data Case: JEDEC DO-15 molded plastic over glass body Lead: Plated axial leads, solderable per MIL-STD750, Method 2026 Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.015 ounce, 0.4 gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol GP GP Type Number 15A 15B Maximum Recurrent Peak Reverse Voltage 50 100 VRRM Maximum RMS Voltage 35 70 VRMS Maximum DC Blocking Voltage 100 50 VDC Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length at TA=55℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @1.5A Maximum Full Load Reverse Current, Full Cycle Average .375”(9.5mm) Lead Length @TA=55℃ Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=150℃ Typical Reverse Recovery Time (Note 1) Typical Junction Capacitance ( Note 2 ) Typical Thermal Resistance (Note 3) Operating and Storage Temperature Range GP 15D 200 140 200 GP 15G 400 280 400 1.5 50 1.1 100 GP 15J 600 420 600 GP 15K 800 560 800 GP Units 15M 1000 V 700 V 1000 V A A V uA uA uA uS pF ℃/W ℃ I(AV) IFSM VF HTIR IR Trr Cj RθJA TJ,TSTG 5.0 200 2.0 15.0 60 - 65 to + 175 Notes: 1. Reverse Recovery Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 3. Mount on Cu-Pad Size 10mm x 10mm on P.C.B.. - 568 - RATINGS AND CHARACTERISTIC CURVES (GP15A THRU GP15M) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 1.5 FIG.2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 50 AVERAGE FORWARD CURRENT. (A) 1.25 1.0 60Hz RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT. (A) Tj=Tj max 8.3ms Single Half Sine Wave JEDEC Method 40 30 0.75 20 0.5 0.25 0.375"(9.5mm) LEAD LENGTH 0 0 25 50 75 100 o 10 125 150 175 0 1 10 NUMBER OF CYCLES AT 60Hz 100 AMBIENT TEMPERATURE. ( C) 10 FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4- TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS FORWARD CURRENT. (A) Tj=125 0C Tj=150 0C 1 INSTANTANEOUS REVERSE CURRENT. ( A) 1 PULSE WIDTH-300 S 1% DUTY CYCLE Tj=75 0C 0.1 0.1 Tj=25 0C Tj=25 0C 0.01 0.4 0.01 0.6 0.8 1.0 1.2 1.4 1.6 0 20 40 60 80 100 120 140 FORWARD VOLTAGE. (V) PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.5- TYPICAL JUNCTION CAPACITANCE 30 Tj=25 0C f=1.0MHz Vsig=50mVp-p JUNCTION CAPACITANCE.(pF) 10 1 1 10 REVERSE VOLTAGE. (V) 100 - 569 -