MBR1030CT_1

MBR1035CT - MBR10200CT 10.0 AMPS. Schottky Barrier Rectifiers TO-220AB Features Plastic material used carries Underwriters Laboratory Classifications 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Guardring for overvoltage protection High temperature soldering guaranteed: 260oC/10 seconds,0.25”(6.35mm)from case Mechanical Data Cases: JEDEC TO-220AB molded plastic body Terminals: Pure tin plated, lead free. solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting position: Any Mounting torque: 5 in. - lbs. max Weight: 0.08 ounce, 2.24 grams Dimensions in inches and (millimeters) Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Maximum Ratings and Electrical Characteristics Type Number Symbol VRRM VRMS VDC I(AV) IFRM IFSM IRRM VF 0.70 0.57 0.80 0.67 MBR MBR MBR MBR MBR MBR MBR MBR 1035 1045 1050 1060 1090 10100 10150 10200 CT CT CT CT CT CT CT CT Units V V V A A A Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Tc=125OC Peak Repetitive Forward Current (Rated VR, Square Wave, 20KHz) at Tc=125oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Peak Repetitive Reverse Surge Current (Note 1) Maximum Instantaneous Forward Voltage at: (Note 2) IF=5A, TC=25oC IF=5A, TC=125oC o IF=10A, TC=25 C IF=10A, TC=125oC Maximum Instantaneous Reverse Current @ Tc =25 oC at Rated DC Blocking Voltage @ Tc=125 oC (Note 2) Voltage Rate of Change (Rated VR) Maximum Typical Thermal Resistance (Note 3) Operating Junction Temperature Range Storage Temperature Range 35 24 35 45 31 45 50 35 50 60 42 60 90 63 90 10 32 120 100 70 100 150 105 150 200 140 200 1.0 0.80 0.65 0.90 0.75 0.1 15 10 10,000 1.5 -65 to +150 -65 to +175 2.0 0.85 0.75 0.95 0.85 0.5 0.88 0.78 0.98 0.88 A V IR dV/dt RθJC TJ TSTG mA mA V/uS o C/W o C o C Notes: 1. 2.0us Pulse Width, f=1.0 KHz 2. Pulse Test: 300us Pulse Width, 1% Duty Cycle 3. Thermal Resistance from Junction to Case Per Leg, Mount on Heatsink Size of 2 in x 3 in x 0.25in Al-Plate. - 108 - Version: B07 RATINGS AND CHARACTERISTIC CURVES (MBR1035CT THRU MBR10200CT) FIG.1- FORWARD CURRENT DERATING CURVE 6 FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 180 PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) RESISTIVE OR INDUCTIVE LOAD 5 150 Tj=Tj max. 8.3ms Single Half Sine-Wave JEDEC Method 4 120 3 90 2 1 0 0 50 100 o CASE TEMPERATURE. ( C) 150 60 30 0 1 10 NUMBER OF CYCLES AT 60Hz 100 FIG.3- TYPICAL FORWARD CHARACTERISTICS 200 100 FIG.4- TYPICAL REVERSE CHARACTERISTICS 50 MBR1035CT-1045CT Tj=25oC Pulse Width=300 s 1% Duty Cycle INSTANTANEOUS REVERSE CURRENT. (mA) 10 Tj=125 0C MBR1050CT-1060CT INSTANTANEOUS FORWARD CURRENT. (A) 50 1 10 MBR1050CT-1060CT MBR1090CT-10100CT 5 Tj=75 0C 0.1 1 MBR1035CT-1045CT MBR10150CT-10200CT 0.01 MBR1090CT-10200CT Tj=25 0C 0.1 0.001 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 FORWARD VOLTAGE. (V) 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.5- TYPICAL JUNCTION CAPACITANCE TRANSIENT THERMAL IMPEDANCE. ( OC/W) 5,000 100 FIG.6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS PER LEG JUNCTION CAPACITANCE.(pF) 1,000 Tj=25 0C f=1.0MHz Vsig=50mVp-p 10.0 500 1 100 0.1 1.0 10 REVERSE VOLTAGE. (V) 100 0.1 0.01 0.1 1 T, PULSE DURATION. (sec) 10 100 Version: B07