P600A_1

P600A - P600M 6.0 AMPS Silicon Rectifiers P-600 Features High efficiency, Low VF High current capability High reliability High surge current capability Low power loss Mechanical Data Cases: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Pure tin plated, lead free. solderable per MIL-STD-202, Method 208 guaranteed Polarity: Color band denotes cathode High temperature soldering guaranteed: 260oC/10 seconds/.375”,(9.5mm) lead lengths at 5 lbs., (2.3kg) tension Weight: 0.07 ounce, 2.1 grams Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics o Rating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TA=60oC, 0.375”(9.5mm) Lead Length (Fig 1) TL=60℃, 0.125”(3.1mm) Lead Length (Fig 2) Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @6.0A @100A Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=125℃ Typical Junction Capacitance ( Note 1 ) Typical Thermal Resistance (Note 2) Operating Junction and Storage Temperature Range Symbol P600A P600B P600D P600G P600J P600K P600M Units V V V A VRRM VRMS VDC I(AV) 50 35 50 100 70 100 200 140 200 400 280 400 6.0 5.0 400 1.0 1.3 5.0 1.0 110 35 5.0 600 420 600 800 560 800 1000 700 1000 IFSM VF IR Cj RθJA RθJL TJ, TSTG A 1.4 V uA mA pF o C/W o -50 to + 150 C Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C. 2. Mount on Cu-Pad Size 16mm x 16mm on P.C.B. Version: A06 RATINGS AND CHARACTERISTIC CURVES (P600A THRU P600M) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 60 Hz RESISTIVE OR INDUCTIVE LOAD GROUND PLANE 1.0 X 1.0" (25.4 X 25.4mm) COPPER SURFACE AREA 0.050"(1.27mm) min. 1.1 x 1.0" (30 x 30mm) COPPER PADS STANDARD P.C.B. MOUNTING 0.375" (9.5mm) LEAD LENGTH 0 0 20 40 60 80 100 120 o FIG.2- TYPICAL REVERSE CHARACTERISTICS 100 AVERAGE FORWARD RECTIFIED CURRENT. (A) 6.0 5.0 4.0 INSTANTANEOUS REVERSE CURRENT. ( A) 10 Tj=125 0C 3.0 2.0 1.0 ALTERNATE P.C.B. MOUNTING Tj=100 0C 1 Tj=25 0C 140 160 180 200 AMBIENT TEMPERATURE. ( C) 0.1 600 FIG.3- MAXIMUM REPETITIVE FORWARD SURGE CURRENT 8.3 SINGLE HALF SINE-WAVE (JEDEC METHOD) PEAK FORWARD SURGE CURRENT (A) 500 400 0.01 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 140 300 200 100 0 100 0.1 1 NUMBER OF CYCLES AT 60 Hz 10 FIG.5- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4- TYPICAL JUNCTION CAPACITANCE PER LEG 120 100 80 INSTANTANEOUS FORDWARD CURRENT (A) 10 JUNCTION CAPACITANCE.(pF) 1 Tj=25 0C 60 f=10MHz Vsig=50mVp-p 0.1 Tj=25 C PULSE WIDTH-300 S 1% DUTY CYCLE 0 40 20 0 0.1 0.4 1.0 5 10 50 100 400 1000 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 REVERSE VOLTAGE. (V) INSTANTANEOUS FORWARD VOLTAGE, VOLTS Version: A06