P6KE20A

CREAT BY ART P6KE SERIES 600 Watts Transient Voltage Suppressor DO-15 Pb RoHS COMPLIANCE Features UL Recognized File # E-326243 Qualified as per AEC-Q101 Plastic package has Underwriters Laboratory Flammability Classification 94V-0 600 watts surge capability at 10 / 1000 us waveform Excellent clamping capability Low Dynamic impedance Fast response time: Typically less than 1.0ps from 0 volt to VBR for unidirectional and 5.0ns for bidirectional Typical IR less than 1uA above 10V High temperature soldering guaranteed: 260℃ / 10 seconds / .375",(9.5mm) lead length / 5lbs., (2.3kg) tension Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Case: Molded plastic Lead: Pure tin plated lead free, solderable per MIL-STD-202, Method 208 Polarity: Color band denotes cathode except bipolar Weight: 0.42 gram Dimensions in inches and (millimeters) Marking Diagram P6KEXX G Y M = Specific Device Code = Green Compound = Year = Work Month Maximum Ratings and Electrical Characteristics Rating at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Peak Power Dissipation at TA=25℃, Tp=1ms(Note 1) Steady State Power Dissipation at TL=75℃ Lead Lengths .375", 9.5mm (Note 2) Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method)(Note 3) Maximum Instantaneous Forward Voltage at 50A for Unidirectional Only (Note 4) Typical Thermal Resistance Operating and Storage Temperature Range Symbol PPK PD Value 600 5 Unit Watts Watts IFSM 100 Amps VF RθJL RθJA TJ, TSTG 3.5 / 5.0 10 62 -55 to +175 Volts ℃/W ℃ Note 1: Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25℃ Per Fig. 2 Note 2: Mounted on Copper Pad Area 0.4" x 0.4"(10mm x 10mm) Note 3: 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minute Maximum Note 4: VF=3.5V for Devices of V BR≦200V and VF=5.0V Max. for Device VBR>200V Devices for Bipolar Applications 1. For Bidrectional Use C or CA Suffix for Types P6KE6.8 through Types P6KE440 2. Electrical Characterstics Apply in Both Directions Version:G11 RATINGS AND CHARACTERISTIC CURVES (P6KE SERIES) FIG. 1 PEAK PULSE POWER RATING CURVE 100 PPPM, PEAK PULSE POWER, KW NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG.3 TA= 25℃ 125 PEAK PULSE POWER(P PP) or CURRENT(IPPM) DERATING IN PERCENTAGE(%) 100 75 50 25 0 0.1 1 10 100 1000 10000 0 FIG.2 PULSE DERATING CURVE 10 1 0.1 tp, PULSE WIDTH, (S) 25 50 75 100 125 150 175 200 TA, AMBIENT TEMPERATURE (oC) FIG. 3 CLAMPING POWER PULSE WAVEFORM 140 PEAK PULSE CURRENT (%) 120 100 80 60 40 20 td 0 0 0.5 1 1.5 2 t, TIME ms 2.5 3 3.5 4 PULSE WIDTH(td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% OF IPPM 100 FIG. 4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY 8.3mS Single Half Sine Wave JEDEC Method Peak Value IPPM Half Value-IPPM/2 10/1000usec, WAVEFORM as DEFINED by R.E.A. IFSM, PEAK FORWARD SURGE A CURRENT (A) 10 1 tr=10usec 10 NUMBER OF CYCLES AT 60 Hz 100 FIG. 5 TYPICAL JUNCTION CAPACITANCE 10000 VR=0 CJ, JUNCTION CAPACITANCE (pF) A 1000 100 TA=25℃ f=1.0MHz Vsig=50mVp-p MEASURED at STAND-OFF VOLTAGE,Vwm 10 1 10 V(BR), BREAKDOWN VOLTAGE (V) 100 Version:G11 ELECTRICAL CHARACTERISTICS (TA=25 ℃ unless otherwise noted) General Part Number Nominal Voltage Breakdown Voltage (Note 1) VBR (V) Min P6KE6.8 P6KE6.8A P6KE7.5 P6KE7.5A P6KE8.2 P6KE8.2A P6KE9.1 P6KE9.1A P6KE10 P6KE10A P6KE11 P6KE11A P6KE12 P6KE12A P6KE13 P6KE13A P6KE15 P6KE15A P6KE16 P6KE16A P6KE18 P6KE18A P6KE20 P6KE20A P6KE22 P6KE22A P6KE24 P6KE24A P6KE27 P6KE27A P6KE30 P6KE30A P6KE33 P6KE33A P6KE36 P6KE36A P6KE39 P6KE39A P6KE43 P6KE43A P6KE47 P6KE47A P6KE51 P6KE51A P6KE56 P6KE56A P6KE62 P6KE62A P6KE68 P6KE68A P6KE75 P6KE75A P6KE82 P6KE82A P6KE91 P6KE91A 6.8 6.8 7.5 7.5 8.2 8.2 9.1 9.1 10 10 11 11 12 12 13 13 15 15 16 16 18 18 20 20 22 22 24 24 27 27 30 30 33 33 36 36 39 39 43 43 47 47 51 51 56 56 62 62 68 68 75 75 82 82 91 91 6.12 6.46 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 42.3 44.7 45.9 48.5 50.4 53.2 55.8 58.9 61.2 64.6 67.5 71.3 73.8 77.9 81.9 86.5 (V) Max 7.48 7.14 8.25 7.88 9.02 8.61 10.00 9.55 11.00 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 51.7 49.4 56.1 53.6 61.6 58.8 68.2 65.1 74.8 71.4 82.5 78.8 90.2 86.1 100 95.5 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 1000 1000 500 500 200 200 50 50 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Test Current IT (mA) Stand-Off Voltage VWM (V) Maximum Maximum Maximum Maximum Reverse Leakage Peak Surge Clamping Voltage Temperature @ IPPM @ VWM Current Coefficient of VBR ID IPPM Vc (uA) (A) (Note 2) 58.0 60.0 53.0 55.0 50.0 52.0 45.0 47.0 42.0 43.0 38.0 40.0 36.0 37.0 33.0 34.0 28.0 29.0 26.0 28.0 23.0 25.0 21.0 22.0 19.0 20.0 18.0 19.0 16.0 16.8 14.0 15.0 13.0 13.8 12.0 12.6 11.1 11.6 10.0 10.6 9.2 9.7 8.5 8.9 7.8 8.1 7.0 7.4 6.4 6.8 5.8 6.1 5.3 5.5 4.8 5.0 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.5 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77.0 89.0 85.0 98.0 92.0 108 103 118 113 131 125 0.057 0.057 0.061 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.075 0.078 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 0.088 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 0.101 0.101 0.102 0.102 0.103 0.103 0.104 0.104 0.104 0.104 0.105 0.105 0.105 0.105 0.106 0.106 Version:G11 (V) (%/℃) ELECTRICAL CHARACTERISTICS (TA=25 ℃ unless otherwise noted) General Part Number Nominal Voltage Breakdown Voltage (Note 1) VBR (V) Min P6KE100 P6KE100A P6KE110 P6KE110A P6KE120 P6KE120A P6KE130 P6KE130A P6KE150 P6KE150A P6KE160 P6KE160A P6KE170 P6KE170A P6KE180 P6KE180A P6KE200 P6KE200A P6KE220 P6KE220A P6KE250 P6KE250A P6KE300 P6KE300A P6KE350 P6KE350A P6KE400 P6KE400A P6KE440 P6KE440A 100 100 110 110 120 120 130 130 150 150 160 160 170 170 180 180 200 200 220 220 250 250 300 300 350 350 400 400 440 440 90 95 99 105 108 114 117 124 135 143 144 152 153 162 162 171 180 190 198 209 225 237 270 285 315 332 360 380 396 418 (V) Max 110 105 121 116 132 126 143 137 165 158 176 168 187 179 198 189 220 210 242 231 275 263 330 315 385 368 440 420 484 462 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 81.0 85.5 89.2 94.0 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171 175 185 202 214 243 256 284 300 324 342 356 376 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Test Current IT (mA) Stand-Off Voltage VWM (V) Maximum Maximum Maximum Maximum Reverse Leakage Peak Surge Clamping Voltage Temperature @ IPPM @ VWM Current Coefficient of VBR ID IPPM Vc (uA) (A) (Note 2) 4.3 4.5 3.9 4.1 3.6 3.8 3.3 3.5 2.9 3.0 2.7 2.8 2.5 2.6 2.4 2.5 2.1 2.2 1.8 1.9 1.7 1.8 1.4 1.5 1.2 1.3 1.0 1.1 1.0 1.04 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 344 328 360 344 430 414 504 482 574 548 631 602 0.106 0.106 0.107 0.107 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 (V) (%/℃) Notes: 1. VBR measure after I T applied for 300us, I T=square wave pulse or equivalent. 2. Surge current waveform per Figure. 3 and derate per Figure. 2. 3. For bipolar types having V WM of 10 volts and under, the I D limit is doubled. 4. All terms and symbols are consistent with ANSI/IEEE C62.35. Version:G11