S1AB_1

S1AB - S1MB 1.0 AMP. Surface Mount Rectifiers SMB/DO-214AA .083(2.10) .077(1.95) .147(3.73) .137(3.48) Features For surface mounted application Glass passivated junction chip. Low forward voltage drop High current capability Easy pick and place High surge current capability Plastic material used carries Underwriters Laboratory Classification 94V-0 High temperature soldering: o 260 C / 10 seconds at terminals .187(4.75) .167(4.25) .012(.31) .006(.15) .103(2.61) .078(1.99) .012(.31) .006(.15) .056(1.41) .035(0.90) .209(5.30) .201(5.10) .008(.20) .004(.10) Mechanical Data Case: Molded plastic Terminals: Pure tin plated, lead free. Polarity: Indicated by cathode band Packaging: 12mm tape per EIA STD RS-481 Weight: 0.093 gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @TL =110 oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 1.0A Maximum DC Reverse Current @ TA =25 C at Rated DC Blocking Voltage @ TA=125 oC Typical Junction Capacitance ( Note 1 ) Typical Thermal Resistance ( Note 2 ) Operating Temperature Range o Symbol VRRM VRMS VDC I(AV) IFSM VF IR Cj RθJL TJ S1 AB 50 35 50 S1 BB 100 70 100 S1 DB 200 140 200 S1 GB 400 280 400 1.0 30 1.1 S1 JB 600 420 600 S1 S1 Units KB MB 800 1000 V 560 700 V 800 1000 V A A V uA uA pF o C/W o C o C Storage Temperature Range TSTG 1. Measured at 1 MHz and Applied VR=4.0 Volts Notes: 2. Measured on P.C. Board with 0.27” x 0.27” (7.0mm x 7.0mm) Copper Pad Areas. 5 50 12 30 -55 to +150 -55 to +150 Version: A06 RATINGS AND CHARACTERISTIC CURVES (S1AB THRU S1MB) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 1.2 FIG.2- TYPICAL REVERSE CHARACTERISTICS 100 AVERAGE FORWARD CURRENT. (A) 1.0 INSTANTANEOUS REVERSE CURRENT. ( A) 0.8 0.6 0.4 10 1 Tj=125 0C 0.2 0 Tj=75 0C 0.1 0 20 40 60 80 100 o 120 140 160 LEAD TEMPERATURE. ( C) Tj=25 0C 0.01 FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT. (A) 100 0.001 50 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 20 10 5 8.3ms Single Half Sine Wave Tj=Tj max 1 2 5 10 20 50 100 2 1 FIG.5- TYPICAL FORWARD CHARACTERISTICS 100 50 NUMBER OF CYCLES AT 60Hz INSTANTANEOUS FORWARD CURRENT. (A) 20 10 5 2 1.0 0.5 0.2 0.1 0.05 FIG.4- TYPICAL JUNCTION CAPACITANCE 100 JUNCTION CAPACITANCE.(pF) 50 Tj=25 0C f=1.0MHz Vsig=50mVp-p 20 10 5 2 1 0.01 0.02 0.1 1 REVERSE VOLTAGE. (V) 10 100 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2 FORWARD VOLTAGE. (V) Version: A06