SF1603PT

SF1601PT - SF1608PT 16.0 AMPS. Glass Passivated Super Fast Rectifiers TO-3P/TO-247AD Features Dual rectifier construction, positive center-tap Plastic package has Underwriters Laboratory Flammability Classifications 94V-0 Glass passivated chip junctions Superfast recovery time, high voltage Low forward voltage, high current capability Low thermal resistance Low power loss, high efficiency High temperature soldering guaranteed: 260oC / 10 seconds, 0.16”(4.06mm) lead lengths at 5 lbs.(2.3kg) tesion PIN 1 PIN 3 PIN 2 Positive CT Mechanical Data Cases: JEDEC TO-3P/TO-247AD molded plastic Terminals: Pure tin plated, lead free. solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting position: Any Weight: 0.2 ounce, 5.6 grams Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Tc=100 oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @8.0A Maximum D.C. Reverse Current at Rated DC Blocking Voltage @ Tc=25 oC @ Tc=100 oC Symbol VRRM VRMS VDC I(AV) IFSM VF IR SF 1601 PT SF 1602 PT SF 1603 PT SF 1604 PT SF 1605 PT SF 1606 PT SF 1607 PT SF 1608 PT Units V V V A A 50 35 50 100 150 200 300 400 500 600 70 105 140 210 280 350 420 16 150 0.95 10 500 35 85.0 2 -55 to +150 -55 to +150 o 100 150 200 300 400 500 600 1.3 1.7 V uA uA nS pF C/W o C o C Maximum Reverse Recovery Time(Note 2) o TJ=25 C Trr Cj RθJC TJ Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 3) Operating Junction Temperature Range Storage Temperature Range TSTG 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C. Notes: 2. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Recover to 0.25A. 3. Mounted on Heatsink Size of 3” x 5” x 0.25” Al-Plate. Version: A06 RATINGS AND CHARACTERISTIC CURVES (SF1601PT THRU SF1608PT) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 20 16 12 8 4 0 AVERAGE FORWARD CURRENT. (A) FIG.2- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG 100 INSTANTANEOUS FORWARD CURRENT. ( A) SF1601PT-04PT 40 20 10 SF1605PT-06PT 4 2 1 SF1607PT-08PT 0 50 CASE TEMPERATURE. ( C) o 100 150 PEAK FORWARD SURGE CURRENT. (A) FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER LEG 200 175 150 125 8.3ms Single Half Sine Wave JEDEC Method Tj=Tj max. 0.4 0.2 0.1 0.2 Pulse Width=300 s 2% Duty Cycle 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 FORWARD VOLTAGE. (V) FIG.5- TYPICAL REVERSE CHARACTERISTICS 100 75 50 1 1000 2 5 10 20 50 100 INSTANTANEOUS REVERSE CURRENT. ( A) NUMBER OF CYCLES AT 60Hz 100 TJ=100 0C FIG.4- TYPICAL JUNCTION CAPACITANCE PER LEG 1000 500 TJ=75 0C 10 CAPACITANCE.(pF) 200 100 50 20 10 0.1 Tj=25oC f=1MHz Vsig=50mVp-p 1 TJ=25 0C 0.1 0.5 1 5 10 50 100 REVERSE VOLTAGE. (V) 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.6- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50 NONINDUCTIVE 10 NONINDUCTIVE trr +0.5A DUT (-) PULSE GENERATOR (NOTE 2) NON INDUCTIVE OSCILLOSCOPE (NOTE 1) (+) 0 -0.25A (+) 50Vdc (approx) (-) NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms -1.0A 1cm SET TIME BASE FOR 5/ 10ns/ cm Version: A06