SK215A

CREAT BY ART 2.0AMPS. Surface Mount Schottky Barrier Rectifier SMA/DO-214AC SK22A - SK215A Pb RoHS COMPLIANCE Features For surface mounted application Metal to silicon rectifier, majority carrier conduction Low forward voltage drop Easy pick and place High surge current capability Plastic material used carriers Underwriters Laboratory Classigication 94V-0 Epitaxial construction High temperature soldering: 260℃ /10 seconds at terminals Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Case: Molded plastic Terminal: Pure tin plated, lead free Polarity: Indicated by cathode band Packaging: 8mm tape per EIA STD RS-481 Weight: 0.067 grams Dimensions in inches and (millimeters) Marking Diagram SK2XA = Specific Device Code G Y M = Green Compound = Year = Work Month Maximum Ratings and Electrical Charac Rating at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TL(See Fig. 1) Peak Forward Surge Current, 8.3 ms Single Half Sinewave Superimposed on Rated Load Maximum Instantaneous Forward Voltage (Note 1) @2A Maximum DC Reverse Current at Rated DC Blocking Voltage @ TA=25 ℃ @ TA=100 ℃ @ T A=125 ℃ Symbol VRRM VRMS VDC IF(AV) IFSM VF SK 22A 20 14 20 SK 23A 30 21 30 SK 24A 40 28 40 SK 25A 50 35 50 2 50 SK 26A 60 42 60 SK 29A 90 63 90 SK 210A 100 70 100 SK 215A 150 105 150 Unit V V V A A 0.50 0.5 0.70 0.85 0.1 0.95 V mA mA mA mJ IR 10 - 5 2.0 Non-repetitive Peak Revwese Avalanche Energy L=40mH Ta=25℃ max prior to surge, Inductive load switch off Typical Junction Capecitance Typical Thermal Resistance (Note 2) Operating Temperature Range Storage Temperature Range Note 1: Pulse Test with PW=300u sec, 1% Duty Cycle ERSM Cj RθJA TJ TSTG - 65 to + 125 130 20 50 88 - 65 to + 150 - 65 to + 150 O pF C/W O O C C Note 2: Measured on P.C.Board with 0.2" x 0.2"(5.0mm x 5.0mm) Copper Pad Areas. Version:G11 RATINGS AND CHARACTERISTIC CURVES (SK22A THRU SK215A) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 2.5 SK26A-SK215A PEAK FORWARD SURGE CURRENT (A) AVERAGE FORWARD CURRENT (A) 2 1.5 SK22A-SK25A 1 0.5 0 50 60 70 80 90 100 110 120 130 140 150 160 LEAD TEMPERATURE (oC) RESISTIVE OR INDUCTIVE LOAD 50 40 30 20 10 0 1 FIG. 2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 8.3ms Single Half Sine-Wave JEDEC method AT RATED TL 10 NUMBER OF CYCLES AT 60 Hz 100 Fig. 4- TYPICAL REVERSE CHARACTERISTICS 100 FIG. 3- TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT (mA) SK22A-SK24A 10 SK215A 1 SK29A-SK210A SK25A-SK26A 0.1 PULSE WIDTH=300us 1% DUTY CYCLE 0.01 0.1 0.3 0.5 0.7 0.9 1.1 FORWARD VOLTAGE (V) 1.3 1.5 10 22A-24A TA=125 oC 25A-26A TA=125 oC 1 25A-26A TA=75 oC 22A-24A TA=75 oC 0.1 29A-215A TA=125 oC 29A-215A TA=75 oC 0.01 22A-24A TA=25 oC 25A-26A TA=25 oC 0.001 0 20 40 29A-215A TA=25 oC 60 80 100 120 140 100 INSTANTANEOUS FORWARD CURRENT (A) PERCENT OF RATED PEAK REVERSE VOLTAGE.(%) FIG. 5- TYPICAL JUNCTION CAPACITANCE 1000 JUNCTION CAPACITANCE (pF) TA=25℃ f=1.0MHz Vslg=50mVp-p SK22A-SK26A 100 FIG. 6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS 100 TRANSIENT THERMAL IMPEDANCE(℃/W) 100 10 1 SK29A-SK215A 10 0.1 1 10 REVERSE VOLTAGE (V) 0.1 0.01 0.1 1 PULSE DURATION (sec) 10 100 Version:G11