SRA1090

SRA1020 - SRA10150 10.0 AMPS. Schottky Barrier Rectifiers TO-220AC .185(4.70) .175(4.44) .412(10.5) MAX .113(2.87) .103(2.62) DIA .154(3.91) .148(3.74) .27(6.86) .23(5.84) .594(15.1) .587(14.9) PIN1 .16(4.06) .14(3.56) .56(14.22) .53(13.46) .037(0.94) .027(0.68) 2 .11(2.79) .10(2.54) .055(1.40) .045(1.14) Features Low power loss, high efficiency. High current capability, Low VF. High reliability High surge current capability. Epitaxial construction. Guard-ring for transient protection. For use in low voltage, high frequency inventor, free wheeling, and polarity protection application .205(5.20) .195(4.95) .025(0.64) .014(0.35) PIN 1 PIN 2 CASE Mechanical Data Cases: TO-220AC molded plastic Epoxy: UL 94V-0 rate flame retardant Terminals: Pure tin plated, lead free. solderable per MIL-STD-202, Method 208 guaranteed Polarity: As marked High temperature soldering guaranteed: 260oC/10 seconds/ .25”,(6.35mm) from case. W eight: 2.24 grams Dimensions in inches and (millimeters) Rating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol SRA SRA SRA Type Number 1020 1030 Maximum Ratings and Electrical Characteristics o 1040 SRA 1050 SRA 1060 SRA SRA SRA 1090 10100 10150 Units V V V A A Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @Tc=110 oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 10A Maximum D.C. Reverse Current @ Tc=25 C o at Rated DC Blocking Voltage @ Tc=100 C o VRRM VRMS VDC I(AV) IFSM VF IR Cj RθJC TJ TSTG 20 14 20 30 21 30 40 28 40 50 35 50 10 60 42 60 90 63 90 100 150 70 105 100 150 170 0.55 0.5 15 10 400 2.0 0.70 0.85 0.1 5.0 0.95 V mA mA pF o C/W o C o C Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 1) Operating Junction Temperature Range -65 to +125 Storage Temperature Range Notes: 1. Mounted on Heatsink Size of 2” x 3“ x 0.25” Al-Plate. 2. Measured at 1MHz and Applied Reverse Voltage of 4.0V D.C. -65 to +150 -65 to +150 - 106 - Version: B07 RATINGS AND CHARACTERISTIC CURVES (SRA1020 THRU SRA10150) FIG.1- FORWARD CURRENT DERATING CURVE 10 300 SRA1050-150 FIG.2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 8.3ms SINGLE HALF SINE WAVE PER LEG. (JEDEC METHOD) Tj=Tj max. PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 8 250 200 150 100 6 SRA1020-40 4 2 50 0 0 50 100 o CASE TEMPERATURE. ( C) 150 0 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz 100 FIG.3- TYPICAL FORWARD CHARACTERISTICS 10 FIG.4- TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT. (A) INSTANTANEOUS REVERSE CURRENT. (mA) Tj=100 0C 02 0- 10 10 40 A1 SR 05 0A1 10 0 10 60 10 50 09 A1 SR A1 01 0- 5 Tj=75 0C SR 1.0 SR Tj=25 C PULSE WIDTH-300 S 1% DUTY CYCLE 0.1 .2 .3 .4 .5 .6 .7 .8 INSTANTANEOUS FORWARD VOLTAGE. (V) .9 0.1 0 0 Tj=25 0C 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.5- TYPICAL JUNCTION CAPACITANCE 4000 JUNCTION CAPACITANCE.(pF) Tj=25 0C f=1.0MHz Vsig=50mVp-p 1000 TRANSIENT THERMAL IMPEDANCE. ( OC/W) 100 FIG.6- TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG 10 1 100 0.1 1.0 10 100 0.1 REVERSE VOLTAGE. (V) 0.01 0.1 1 T, PULSE DURATION. (sec) 10 100 Version: B07