SS210L

SS22L - SS215L 2.0 AMPS. Surface Mount Schottky Barrier Rectifiers Sub SMA Features For surface mounted application Low-Profile Package Ideal for automated pick & place Low power loss, high efficiency High current capability, low VF High surge current capability Plastic material used carriers Underwriters Laboratory Classification 94V-0 Epitaxial construction High temperature soldering: 260oC / 10 seconds at terminals Mechanical Data Cases: Sub SMA plastic case Terminal : Pure tin plated, lead free. Polarity: Color band denotes cathode end Packaging: 12mm tape per EIA STD RS-481 Weight approx. 15mg Dimensions in inches and (millimeters) Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, de-rate current by 20% Symbol SS SS SS SS Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Marking Code (Note 4) Maximum Average Forward Rectified Current at TL(See Fig. 1) Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage (Note 1) @ 2.0A Maximum DC Reverse Current @ TA =25 oC at Rated DC Blocking Voltage @ TA=125 oC Typical Junction Capacitance (Note 3) Typical Thermal Resistance ( Note 2 ) Operating Temperature Range Maximum Ratings and Electrical Characteristics SS 26L 60 42 60 2.0 50 0.5 0.4 15 10 130 17 75 0.70 0.85 0.1 5 o VRRM VRMS VDC I(AV) IFSM VF IR Cj R θJL R θJA TJ 22L 23L 24L 25L 20 30 40 50 14 21 28 35 20 30 40 50 SS SS SS Units 29L 210L 215L 90 100 150 V 63 70 105 V 90 100 150 V A A 0.95 V mA mA pF C/W o o 22LYM 23LYM 24LYM 25LYM 26LYM 29LYM 20LYM 2ALYM -65 to +125 Storage Temperature Range TSTG Notes: 1. Pulse Test with PW=300 usec, 1% Duty Cycle 2. Measured on P.C.Board with 0.27” x 0.27”(7.0mm x 7.0mm) Copper Pad Areas. 3. Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C. 4. 22LYM: 2=2A, 2-20V, L-Low Profile, Y-Year Code, M-Month Code. -65 to +150 -65 to +150 C C - 36 - Version: B07 RATINGSAND CHARACTERISTIC CURVES (SS22L THRU SS215L) FIG.1- MAXIMUM FORWARD CURRENT DERATING CUR VE 2.0 PEAK FORWARD SURGE CURRENT. (A) FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 50 8.3ms Single Half Sine Wave JEDEC Method AT RATED TL AVERAGE FORWARD CURRENT. (A) RESISTIVE OR INDUCTIVE LOAD 1.5 SS22L-SS24L 1.0 SS25L-SS215L 40 30 20 0.5 PCB MOUNTED ON 0.2X0.2" (5.0X5.0mm) COPPER PAD AREAS 0 50 60 70 80 90 100 110 120 130 O LEAD TEMPERATURE. ( C) 140 150 160 10 0 1 10 NUMBER OF CYCLES AT 60Hz 100 FIG.4-TYPICAL REVERSE CHARACTERISTICS FIG.3- TYPICAL FORWARD CHARACTERISTICS 50 100 SS22L-SS24L SS25L-SS215L TJ=125 C 10 O INSTANTANEOUS FORWARD CURRENT. (A) SS25L-SS26L 10 INSTANTANEOUS REVERSE CURRENT. (mA) SS22L-SS24L SS29L-SS210L 1 1 TJ=75 C O 0.1 SS215L 0.1 0.01 TJ=25 C O TJ=25 C O PULSE WIDTH=300 S 1% DUTY CYCLE 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 FORWARD VOLTAGE. (V) 1.4 1.6 0.001 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS 100 FIG.5-TYPICAL JUNCTION CAPACITANCE 400 JUNCTION CAPACITANCE.(pF) Tj=25 C f=1.0MHz Vsig=50mVp-p 100 O TRANSIENT THERMAL IMPEDANCE. (OC/W) 100 10 1 10 0.1 1 10 0.1 0.01 0.1 REVERSE VOLTAGE. (V) 1 10 T, PULSE DURATION. (sec) 100 Version: B07