SSL24

SSL22 - SSL24 2.0 AMP. Surface Mount Low VF Schottky Barrier Rectifiers SMB/DO-214AA .083(2.10) .077(1.95) .147(3.73) .137(3.48) Features For surface mounted application Metal silicon junction, majority carrier conduction Low forward voltage drop Easy pick and place High surge current capability Plastic material used carries Underwriters Laboratory Classification 94V-0 Epitaxial construction High temperature soldering: 260oC / 10 seconds at terminals .187(4.75) .167(4.25) .012(.31) .006(.15) .103(2.61) .078(1.99) .012(.31) .006(.15) .056(1.41) .035(0.90) .209(5.30) .201(5.10) .008(.20) .004(.10) Mechanical Data Cases: Molded plastic Terminals: Matte tin plating Polarity: Indicated by cathode band Packaging: 12mm tape per EIA STD RS-481 W eight: 0.093 gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol Type Number SSL22 SSL23 Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current See Fig. 1 Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage (Note 1) @ 2.0A Maximum DC Reverse Current @ TA =25 oC at Rated DC Blocking Voltage @ TA=100 oC Maximum Thermal Resistance (Note 2) Marking Code Operating Temperature Range Storage Temperature Range SSL24 40 28 40 Units V V V A A V VRRM VRMS VDC I(AV) IFSM VF IR R θJL R θJA 20 14 20 30 21 30 2.0 80 0.41 0.4 50 25 70 SL23 -55 to +125 -55 to + 150 60 o mA mA C /W o o SL22 TJ TSTG SL24 C C Notes: 1. Pulse Test with PW=300 usec, 1% Duty Cycle. 2. Measured on P.C. Board with 0.4 x .4”(10 x 10mm) Copper Pad Areas. - 14 - Version: A07