TS1118
500mA Low Dropout Positive Voltage Regulator
TO-92 SOT-223 SOT-89
Low Dropout Voltage 1.3V max.
Pin assignment: 1. Ground / Adj 2. Output 3. Input
General Description
The TS1118 Series are high performance positive voltage regulators are designed for use in applications requiring low dropout performance at full rated current, Additionally, the TS1118 Series provides excellent regulation over variations due to changes in line, load and temperature. Outstanding features include low dropout performance at rated current, fast transient response, internal current limiting and thermal shutdown protection of the output device. The TS1118 Series are three terminal regulators with fixed and adjustable voltage options available in popular packages. This series is offered in 3-pin TO-263, TO-220, TO-252 and SOT-223 package.
Features
Low dropout performance 1.3V max. Full current rating over line and temperature. Fast transient response ±2%Total output regulation over line, load and temperature Adjust pin current max 90μA over temperature Line regulation typical 0.015%. Load regulation typical 0.05%. Fixed/adjustable output voltage TO-92, SOT-89 and SOT-223 package
Block Diagram
Ordering Information
Part No. TS1118CT-xx TS1118CY-xx -20 ~ +85 C
o
Operating Temp. (Ambient)
Package TO-220 SOT-89
SOT-223 TS1118CW-xx Note: Where xx denotes voltage option, available are 5.0V, 3.3V, 2.5V and 1.8V. Leave blank for adjustable version. Contact factory for additional voltage options.
Absolute Maximum Rating
Input Supply Voltage Operation Input Supply Voltage Power Dissipation Operating Junction Temperature Range Storage Temperature Range Lead Soldering Temperature (260 C) TO-92 / SOT-89 / SOT-223 Package 5
o
Vin Vin (operate) PD TJ TSTG
12 7 Internally Limited -25 ~ +150 -65 ~ +150
V V W
o o
C C
S
TS1118
1-6
2005/08 rev. A
Electrical Characteristics
Ta = 25 oC, unless otherwise specified. Adjustable version test with Vout = 2.5V.
Parameter
Output Voltage
Conditions
Vout+1.5V ≤ Vin ≤ 7V, Io=10mA Vout+1.5V ≤ Vin ≤ 7V, Io=800mA (Vin-out) =1.5V, Io=10mA (Vin-out) =1.5V, Io=800mA
Min
0.990|Vo| 0.980|Vo| 0.990|Vo| 0.980|Vo| --
Typ
5.0 / 3.3 2.5 / 1.8 1.25 -0.015 0.05 1.3 8 90 -0.5 60
Max
1.010|Vo| 1.020|Vo| 1.010|Vo| 1.020|Vo| 7 0.2 1.0 1.4 10 ---70
Unit
V V V V V % % % V mA uA A % dB
Reference Voltage Input Supply Voltage Line Regulation Load Regulation (note 1,2) Dropout Voltage Minimum Load Current Adjustable Pin Current Current Limit Temperature Stability Ripple Rejection
Vout+1.5V ≤ Vin ≤ 7V, Io=10mA Vin=Vout+1.5V, 10mA ≤ Io ≤ 800mA Io=1A, ∆Vout=1%Vout Vin=5V
------
Vin - Vout=3V Io=10mA F = 120Hz, Io=1A Cout=25uF, Vin=Vout + 3V
1.1 ---
Thermal Performance
Condition
Thermal Resistance Junction to Ambient
Package type
TO-92 SOT-89 SOT-223
Typ
160 180 110
Unit
o
C/W
Note 1: See thermal regulation specification for changes in output voltage due to heating effects. Line and load regulation are measured at a constant junction temperature by low duty cycle pulse testing. Load regulation is measured at the output lead = 1/18” from the package. Note 2: Line and load regulation are guaranteed up to the maximum power dissipation of 15W. Power dissipation is determined by the input / output voltage difference and the output current. Guaranteed maximum power dissipation will not be available over the full input / output voltage range. Note 3: Quiescent current is defined as the minimum output current required to maintain the regulation.
TS1118
2-6
2005/08 rev. A
Typical Application Circuit
Fixed output voltage version
Vout = Vref * (1 + R2 / R1) * Cin is requested if regulator is located Far from power supply filter ** Design Cout as close to Vout pin as possible
Adjustable output voltage version
TS1118
3-6
2005/08 rev. A
Electrical Characteristics Curve
Figure 1: load transient response Figure 2: load regulation v.s. temp.
Figure 3: output change v.s. temp.
Figure 4: line regulation
Figure 5: line transient response
TS1118
4-6
2005/08 rev. A
SOT-89 Mechanical Drawing
A B
I
DIM A B C D E F
J
H G
C
SOT-89 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX 4.40 4.60 0.173 0.181 1.50 1.7 0.059 0.070 2.30 2.60 0.090 0.102 0.40 0.52 0.016 0.020 1.50 1.50 0.059 0.059 3.00 3.00 0.118 0.118 0.89 4.05 1.4 0.35 1.20 4.25 1.6 0.44 0.035 0.159 0.055 0.014 0.047 0.167 0.068 0.017
E
D
G H I J
F
TO-92 Mechanical Drawing
A
DIM
B
A B C D E F G H
TO-92 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX 4.30 4.70 0.169 0.185 4.30 4.70 0.169 0.185 14.30(typ) 0.563(typ) 0.43 0.49 0.017 0.019 2.19 2.81 0.086 0.111 3.30 2.42 0.37 3.70 2.66 0.43 0.130 0.095 0.015 0.146 0.105 0.017
C
E
F
H
D
G
TS1118
5-6
2005/08 rev. A
SOT-223 Mechanical Drawing
A B
I
DIM A B C D E F G H I J K
H
C
J
K
F G E D
SOT-223 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX 6.350 6.850 0.250 0.270 2.900 3.100 0.114 0.122 3.450 3.750 0.136 0.148 0.595 0.635 0.023 0.025 4.550 4.650 0.179 0.183 2.250 2.350 0.088 0.093 0.835 6.700 0.250 10° 1.550 1.035 7.300 0.355 16° 1.800 0.032 0.263 0.010 10° 0.061 0.041 0.287 0.014 16° 0.071
TS1118
6-6
2005/08 rev. A
很抱歉,暂时无法提供与“TS1118”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格
- 1+19.64405
- 10+18.16405
- 30+17.86805
- 100+16.98005