0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
TS1537ACM5

TS1537ACM5

  • 厂商:

    TSC

  • 封装:

  • 描述:

    TS1537ACM5 - Dual 1A Low Dropout Positive Voltage Regulator - Taiwan Semiconductor Company, Ltd

  • 详情介绍
  • 数据手册
  • 价格&库存
TS1537ACM5 数据手册
TS1537A/B/C Dual 1A Low Dropout Positive Voltage Regulator Pin assignment: 1. Input 2 2. Input 1 3. Ground 4. Output 1 (3.3V/2.5V) 5. Output 2 (2.5V/1.8V) Dual Output for 3.3V, 2.5V or 1.8V Low Dropout Voltage 1.3V max. General Description The TS1537A, TS1537B & TS1537C are low dropout positive voltage regulators with minimum of 1A output current capability. The product is specifically designed to provide well-regulated supply for low voltage IC applications such as high-speed bus termination and low current 3.3V/2.5V (TS1537A) or 3.3V/1.8V(TS1537B) or 2.5V/1.8V(TS1537C) logic supply. This series are guaranteed to have less 1.4V dropout at full load current making it ideal to provide well regulated outputs dual channels with up to 12V input supply. This series is offered in 5-pin TO-263-5L package. Features Low dropout performance 1.3V max. Full current rating over line and temperature. Fast transient response ±2%Total output regulation over line, load and temperature Build-in thermal shutdown each channel Output current limiting for each channel Good noise rejection Channel 1=3.3V (TS1537A/B) or 2.5V (TS1537C) Channel 2=2.5V (TS1537A) or 1.8V (TS1537B/C) Block Diagram (each channel) Ordering Information Part No. TS1537ACM5 TS1537BCM5 TS1537CCM5 Note: TS1537A is ch1=3.3V, ch2=2.5V, TS1537B is ch1=3.3V, ch2=1.8V. TS1537C is ch1=2.5V, ch2=1.8V. -0 ~ +85 oC TO-263-5L Operating Temp. (Ambient) Package Absolute Maximum Rating Input Supply Voltage Operation Input Supply Voltage Power Dissipation Operating Junction Temperature Range Storage Temperature Range Lead Soldering Temperature (260 oC) Vin Vin (operate) PD TJ TSTG 12 10 Internally Limited 0 ~ +150 -65 ~ +150 10 V V W o o C C S TS1537A/B/C 1-5 2003/12 rev. B Electrical Characteristics Ta = 25 oC, unless otherwise specified. Parameter Output Voltage TS1537A/B-Vout 1 TS1537A/C-Vout 2/1 TS1537B/C-Vout 2 Input Supply Voltage Line Regulation Load Regulation Vout 1 Vout 2 Conditions 4.8V ≤ Vin ≤ 7V, Io=10mA 4V ≤ Vin ≤ 7V, Io=10mA 4V ≤ Vin ≤ 7V, Io=10mA Min 3.267 2.475 1.782 -- Typ 3.3 2.5 1.8 -0.015 0.5 1.3 8 0.008 -0.5 60 Max 3.366 2.550 1.836 10 0.2 1.0 1.4 10 0.04 --70 Unit V V V % % V mA uA A % dB Vout+1.5V ≤ Vin ≤ 7V, Io=10mA Vin=5V, 10mA ≤ Io ≤ 1A Vin=4V, 10mA ≤ Io ≤ 1A Io=1A, ∆Vout=0.1%Vout 0 oC ≤ Tj ≤ 125 oC, (note 3) Ta=25 oC, 30mS pulse Vin - Vout=3V Io=10mA F = 120Hz, Io=1A Cout=25uF, Vin=Vout + 3V -----1.1 --- (note 1,2) Dropout Voltage Minimum Load Current Thermal Regulation Current Limit Temperature Stability Ripple Rejection Thermal Performance Condition Thermal Resistance Junction to Ambient TO-263-5L 85 Package type Typ Unit o C/W Note 1: See thermal regulation specification for changes in output voltage due to heating effects. Line and load regulation are measured at a constant junction temperature by low duty cycle pulse testing. Load regulation is measured at the output lead = 1/18” from the package. Note 2: Line and load regulation are guaranteed up to the maximum power dissipation of 15W. Power dissipation is determined by the input / output voltage difference and the output current. Guaranteed maximum power dissipation will not be available over the full input / output voltage range. Note 3: Quiescent current is defined as the minimum output current required to maintain the regulation. TS1537A/B/C 2-5 2003/12 rev. B Typical Application Circuit “A” version “B” version “C” version TS1537A/B/C 3-5 2003/12 rev. B Electrical Characteristics Curve (each channel) Figure 1: dropout voltage v.s. output current Figure 2: load regulation v.s. temp. Figure 3: output change v.s. temp. Figure 4: line regulation Figure 5: line transient response Figure 6: load transient response TS1537A/B/C 4-5 2003/12 rev. B TO-263-5L Mechanical Drawing A E F J B DIM A B C D E F G H I J TO-263-5L DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX 10.220 14.600 0.750 1.573 4.560 1.240 2.280 0.280 8.240 1.540 10.260 15.870 0.770 1.827 4.570 1.270 2.790 0.320 8.280 1.800 0.402 0.575 0.030 0.062 0.179 0.049 0.090 0.011 0.324 0.060 0.404 0.625 0.030 0.072 0.180 0.050 0.110 0.013 0.326 0.071 I C G D H TS1537A/B/C 5-5 2003/12 rev. B
TS1537ACM5
### 物料型号 - TS1537A/B/C系列,具体型号包括TS1537ACM5、TS1537BCM5、TS1537CCM5。

### 器件简介 TS1537A、TS1537B和TS1537C是低 dropout 正电压调节器,具有至少1A的输出电流能力。这些产品专为提供低压IC应用的稳定电源而设计,例如高速总线终止和低电流3.3V/2.5V(TS1537A)或3.3V/1.8V(TS1537B)或2.5V/1.8V(TS1537C)逻辑电源。该系列产品保证在全负载电流下有不超过1.4V的dropout,使其成为理想的双通道调节输出,输入电压高达12V。

### 引脚分配 - 1. 输入 - 2. 输入 - 3. 地 - 4. 输出1(3.3V/2.5V) - 5. 输出2(2.5V/1.8V)

### 参数特性 - 低dropout性能:最大1.3V。 - 全电流额定:在线性和温度范围内。 - 快速瞬态响应:±2%总输出调节在线性、负载和温度范围内。 - 良好的噪声抑制:通道1=3.3V(TS1537A/B)或2.5V(TS1537C),通道2=2.5V(TS1537A)或1.8V(TS1537B/C)。 - 每个通道的输出电流限制。 - 每个通道的内置热关闭。

### 功能详解 TS1537A/B/C系列提供双输出,分别为3.3V、2.5V或1.8V的低dropout电压,最大1.3V。这些调节器在全负载电流下保证有不超过1.4V的dropout,使其适用于高达12V输入电压的双通道调节输出。

### 应用信息 这些调节器适用于需要低压IC应用的稳定电源,如高速总线终止和低电流逻辑电源。

### 封装信息 - 5引脚TO-263-5L封装。
TS1537ACM5 价格&库存

很抱歉,暂时无法提供与“TS1537ACM5”相匹配的价格&库存,您可以联系我们找货

免费人工找货