TS2940CM18

TS2940 1A Ultra Low Dropout Fixed Positive Voltage Regulator TO-263 Low Dropout Voltage 0.6V (typ.) Pin assignment: 1. Input 2. Ground 3. Output General Description The TS2940 series of fixed-voltage monolithic micro-power voltage regulators is designed for a wide range of applications. This device excellent choice of use in battery-power application. Furthermore, the quiescent current increases on slightly at dropout, which prolongs battery life. This series of fixed-voltage regulators features very low ground current (100uA Typ.) and very low drop output voltage (Typ. 60mV at light load and 600mV at 1A). This includes a tight initial tolerance of 1% typ., extremely good line regulation of 0.05% typ., and very low output temperature coefficient. This series is offered in 3-pin TO-263, TO-220, TO-252 & SOT-223 package. Features Dropout voltage typically 0.6V @Io=1A Output current up to 1A Output voltage trimmed before assembly -18V Reverse peak voltage +30V Input over voltage protection +60V Transient peak voltage Internal current limit Thermal shutdown protection Block Diagram Ordering Information Part No. TS2940CZxx TS2940CMxx TS2940CPxx -40 ~ +85 C o Operation Temp. -40 ~ +125 C o Package TO-220 TO-263 TO-252 TS2940CWxx SOT-223 Note: Where xx denotes voltage option, available are 5.0V, 3.3V, 2.5V and 1.8V. Contact factory for additional voltage options. Absolute Maximum Rating (Note 1) Input Supply Voltage (Note 2) Operation Input Supply Voltage Power Dissipation (Note 3) Operating Junction Temperature Range Storage Temperature Range Lead Soldering Temperature (260 oC) TO-220 TO-263 Package TO-252 / SOT-223Package 5 4 S Vin Vin (operate) PD TJ TSTG -18 ~ +60 30V Internally Limited -40 ~ +125 -65 ~ +150 V V W o o C C TS2940 1-6 2003/12 rev. B Electrical Characteristics Vin = Vout + 5V, IL = 5mA, Co = 10uF, Ta = 25 oC, unless otherwise specified. Parameter Output Voltage Output Voltage Conditions 5mA ≤ IL ≤ 1A, Vo+5V ≤ Vin ≤ 26V Min 0.980|Vo| 0.970|Vo| Typ 5.0 / 3.3 2.5 / 1.8 Max 1.020|Vo| 1.030|Vo| Unit V V Input Supply Voltage Output Voltage Temperature Coefficient Line Regulation Load Regulation Dropout Voltage (Note 4) Vo+2V ≤ Vin ≤ 26V 5mA ≤ IL ≤ 1A IL=100mA IL=500mA IL=800mA Quiescent Current (Note 5) IL=5mA IL=800mA Short Circuit Current (Note 6) Output Noise, 10Hz to 100KHz, IL=10mA Vout=0 CL=2.2uF CL=3.3uF CL=33uF --- -50 26 150 V ppm/ C o ------------ 0.05 0.2 100 300 600 10 30 -500 350 120 0.5 1.0 200 500 800 --1.5 ---- % % mV mA A uVrms Thermal Performance Condition Thermal Resistance Junction to Ambient Package type TO-220 TO-263 TO-252 SOT-223 Typ 60 80 150 170 Unit o C/W Note 1: Absolute Maximum Rating is limits beyond which damage to the device may occur. For guaranteed specifications and test conditions see the Electrical Characteristics. Note 2: Maximum positive supply voltage of 60V must be limited duration (