TS2940CPRO

TS2940 1A Ultra Low Dropout Voltage Regulator TO-220 TO-263 2 (D PAK) TO-252 (DPAK) SOT-223 Pin Definition: 1. Input 2. Ground 3. Output General Description The TS2940 series of fixed-voltage monolithic micro-power voltage regulators is designed for a wide range of applications. This device excellent choice of use in battery-power application. Furthermore, the quiescent current increases on slightly at dropout, which prolongs battery life. This series of fixed-voltage regulators features low drop output voltage (Typ. 60mV at light load and 600mV at 800mA). This includes a tight initial tolerance of 2%, extremely good line regulation of 0.05% typ., and very low output temperature coefficient. Features ● ● ● ● Dropout voltage typically 0.6V @ Io=800mA Output current up to 1A Output voltage trimmed before assembly -18V Reverse peak voltage ● ● ● ● +30V Input over voltage protection +60V Transient peak voltage Internal current limit Thermal shutdown protection Block Diagram Ordering Information Part No. Package Packing TS2940CZxx C0 TO-220 50pcs / Tube TS2940CMxx RN TO-263 800pcs / 13” Reel TS2940CPxx RO TO-252 2.5Kpcs / 13” Reel TS2940CWxx RP SOT-223 2.5Kpcs / 13” Reel Note: Where xx denotes voltage option, available are 50= 5.0V 3 3 = 3 .3 V Contact factory for additional voltage options. Absolute Maximum Rating (Note 1) Parameter Input Supply Voltage (Note 2) Input Supply Voltage Power Dissipation (Note 3) Operating Junction Temperature Range Storage Temperature Range Symbol VIN VOPR PD TJ TSTG Limit -18 ~ +60 26 Internally Limited -40 ~ +125 -65 ~ +150 Unit V V W o o C C 1/10 Version: C07 TS2940 1A Ultra Low Dropout Voltage Regulator Electrical Characteristics ( VIN=VOUT+1V, IL=5mA, CO=22uF, TA=25oC, unless otherwise noted) Parameter Input Supply Voltage Output Voltage Output Voltage Temperature Coefficient Line Regulation Load Regulation Dropout Voltage (Note 4) Vo+2V ≤ VIN ≤ 26V 5mA ≤ IL ≤ 800mA IL=100mA IL=500mA IL=800mA Quiescent Current (Note 5) Short Circuit Current (Note 6) Output Noise, 10Hz to 100KHz, IL=10mA IL=5mA IL=800mA VOUT =0 CL=2.2uF CL=3.3uF CL=33uF 5mA ≤ IL ≤ 800mA, Vo+5V ≤ VIN ≤ 26V Conditions Min -0.970|Vo| ------------Typ -5.0 / 3.3 50 0.05 0 .2 100 300 600 10 75 -500 350 120 Max 26 1.030|Vo| 150 0 .5 1.0 200 500 800 15 110 1.5 ---uVrms mV mA A Unit V V ppm/ C % % o Thermal Performance Condition Thermal Resistance Junction to Ambient Package type TO-220 TO-263 TO-252 Typ 60 80 150 Unit o C/W SOT-223 170 Note 1: Absolute Maximum Rating is limits beyond which damage to the device may occur. For guaranteed specifications and test conditions see the electrical characteristics. Note 2: Maximum positive supply voltage of 60V must be limited duration (