TS39150CZ05

TS39150 1.5A Ultra Low Dropout Fixed Positive Voltage Regulator TO-263 Pin assignment: 1. Input 2. Ground 3. Output Low Dropout Voltage 0.4V (typ.) General Description The TS39150 series are using process with a PNP pass element for high current, high accuracy and low dropout voltage regulators. These regulator s feature 400mV(typ) dropout voltages and very low ground current, these devices also find applications in lower current and low dropout critical systems, where their tiny dropout voltage and ground current values are important attributes. The TS39150 are fully protected against over current faults, reversed input polarity, reversed lead insertion, over temperature operation, and positive and negative transient voltage spikes. This series is offered in 3-pin TO-263, TO-220 package. Features Dropout voltage typically 0.4V @Io=1.5A Output current up to 1.5A Low ground current Output voltage trimmed before assembly Extremely fast transient response +20V Transient peak voltage -20V Reverse peak voltage Internal current limit Thermal shutdown protection Block Diagram Applications Battery power equipment Automotive electronics High efficiency “Green” computer system High efficiency linear power supplies High efficiency post regulator for switching supply Ordering Information Part No. TS39150CZxx TS39150CMxx Operation Temp. (Junction) -40 ~ +125 oC Package TO-220 TO-263 Note: Where xx denotes voltage option, available are 12V, 5.0V, 3.3V and 2.5V. Contact factory for additional voltage options. Absolute Maximum Rating (Note 1) Input Supply Voltage (Note 2) Operation Input Voltage Power Dissipation (Note 3) Operating Junction Temperature Range Storage Temperature Range Lead Soldering Temperature (260 C) o Vin Vin (operate) PD TJ TSTG -20V ~ +20 20 Internally Limited -40 ~ +125 -65 ~ +150 5 V V W o o C C S TS39150 1-5 2005/3 rev. A Electrical Characteristics Vin = Vout + 1V, IL = 10mA, Co = 10uF, Ta = 25 oC, unless otherwise specified. Parameter Output Voltage Output Voltage Conditions 10mA ≤ IL ≤ 1.5A, Vo+1V ≤ Vin ≤ 26V Min 0.990|Vo| 0.980|Vo| Typ 12 / 5.0 3.3/ 2.5 Max 1.010|Vo| 1.020|Vo| Unit V V V o ppm/ C Input Supply Voltage Output Voltage Temperature Coefficient Line Regulation Load Regulation Dropout Voltage (Note 4) Vo+1V ≤ Vin ≤ 26V 10mA ≤ IL ≤ 1.5A IL=100mA IL=750mA IL=1.5A Quiescent Current (Note 5) IL=100uA IL=750mA IL=1.5A Short Circuit Current (Note 6) Output Noise, 10Hz to 100KHz, IL=100mA Vout=0 CL=2.2uF CL=10uF CL=33uF --------------- -40 0.05 0.2 80 350 400 100 8 22 2.1 600 400 260 20 100 0.5 1.0 200 500 600 ---3.5 ---- % % mV mA A uVrms Thermal Performance Condition Thermal Resistance Junction to Ambient Package type TO-220 TO-263 Typ 60 80 Unit o C/W Note 1: Absolute Maximum Rating is limits beyond which damage to the device may occur. For guaranteed Specifications and test conditions see the Electrical Characteristics. Note 2: Maximum positive supply voltage of 20V must be limited duration (