TS4B01G_1

TS4B01G THRU TS4B07G Single Phase 4.0 AMPS. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 4.0 Amperes Features UL Recognized File # E-96005 Glass passivated junction Ideal for printed circuit board Reliable low cost construction Plastic material has Underwriters Laboratory Flammability Classification 94V-0 Surge overload rating to 120 amperes peak High case dielectric strength of 2000VRMS 0 TS4B .147(3.7) .118(3.0)X45 .996(25.3) .972(24.7) .130(3.3) .602(15.3) .579(14.7) .382(9.7) .366(9.3) .134(3.4) .122(3.1) .176(4.37) .156(3.96) .068(1.73) .060(1.52) .043(1.1) .035(0.9) .709(18) .669(17) Mechanical Data Case: Molded plastic Weight: 0. 15 ounce, 4 grams Mounting torque: 5 in. lbs. Max. .087(2.2) .071(1.8) .303(7.7) .287(7.3) .030(0.75) .022(0.55) Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol TS4B TS4B TS4B TS4B TS4B TS4B TS4B Units Type Number 01G Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @TC = 115℃ Peak Forward Surge Current, 8.3 ms Single Half Sne-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 4.0A Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=125℃ Typical Thermal Resistance (Note) Operating Temperature Range Storage Temperature Range 02G 03G 04G 05G 06G 07G VRRM VRMS VDC I(AV) IFSM VF IR RθJC TJ 50 35 50 100 70 100 200 140 200 400 280 400 4.0 120 1.0 600 420 600 800 1000 560 700 800 1000 V V V A A V uA uA ℃/W ℃ ℃ TSTG Note: Thermal Resistance from Junction to Case with Device Mounted on 2” x 3” 0.25” Al-Plate Heatsink. 5.0 500 5.5 -55 to +150 -55 to + 150 - 732 - RATINGS AND CHARACTERISTIC CURVES (TS4B01G THRU TS4B07G) FIG.1- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT 175 5 FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE PER BRIDGE ELEMENT PEAK FORWARD SURGE CURRENT. (A) 150 125 100 75 50 25 0 8.3ms Single Half Sine Wave JEDEC METHOD AVERAGE FORWARD CURRENT. (A) 4 3 2 1 MOUNTED ON 4X4 INCH COPPER PC BOARD 0.5"(12.7mm) LEAD LENGTH 0 50 CASE TEMPERATURE. ( C) o 1 2 5 10 20 50 100 0 100 150 NUMBER OF CYCLES AT 60Hz FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER BRIDGE ELEMENT 100 FIG.4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 100 40 INSTANTANEOUS FORWARD CURRENT. (A) 20 10 INSTANTANEOUS REVERSE CURRENT. ( A) Tj=100 0C 10 4 2 1 Tj=125 0C 1 0.4 0.2 0.1 0.6 8.3ms Single Half Sine Wave Tj=25 0C 0.7 0.8 0.9 1.0 1.1 1.2 1.3 0.1 0 20 40 60 80 100 120 140 INSTANTANEOUS FORWARD VOLTAGE. (V) PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) - 733 -