UG06A THRU UG06D
0.6 AMP. Ultrafast Plastic Rectifiers
Voltage Range 50 TO 200 Volts Current 0.6 Ampere
Features
Plastic package has Underwriters Laboratories Flammability Classification 94V-0 Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes Ultrafast recovery time for high efficiency Excellent high temperature switching Glass passivated junction High temperature soldering guaranteed: 260℃/10 seconds/.375”,(9.5mm) lead lengths at 5 lbs.,(2.3kg) tension
TS-1
Mechanical Data
Cases: Void free molded plastic body over glass passivated chip Terminals: Axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.0064 ounce, 0,181 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol UG06A Type Number VRRM Maximum Recurrent Peak Reverse Voltage 50 VRMS Maximum RMS Voltage 35 VDC Maximum DC Blocking Voltage 50
Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length @TL = 75℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) @TL = 75℃ Maximum Instantaneous Forward Voltage @ 0.6A Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=100℃
UG06B
UG06C
UG06D
100 70 100 0.6 40 0.95
150 105 150
200 140 200
Units V V V A A V uA uA nS pF ℃/W ℃ ℃
I(AV) IFSM VF
5.0 IR 100 Trr Maximum Reverse Recovery Time ( Note 1 ) 15 Cj Typical Junction Capacitance ( Note 2 ) 9.0 Typical Thermal Resistance ( Note 3 ) RθJA 97 RθJL 28 Operating Temperature Range TJ -55 to +150 Storage Temperature Range TSTG -55 to +150 Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 3. Thermal Resistance from Junction to Ambient at 0.375” (9.5mm) Lead Length. Mount on Cu-Pad Size 0.2” x 0.2” (5mm x 5mm) on PCB.
- 362 -
RATINGS AND CHARACTERISTIC CURVES (UG06A THRU UG06D)
FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE
0.9 Resistive or Inductive Load 0.375" (9.5mm) Lead Length
FIG.2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT
100
PEAK FORWARD SURGE CURRENT. (A)
AVERAGE FORWARD RECTIFIED CURRENT AMPERES
0.75
TL=75 0C 8.3ms Single Half Sine Wave JEDEC Method
0.6 TL, Lead Temperature 0.45
10
0.3 TA, AMBIENT TEMPERATURE P.C.B. MOUNTED 0.7 x 0.7" (8x8mm) COPPER PAD 0 25 50 75 100
o
0.15
0 125 150 175 TEMPERATURE. ( C)
1 1 10 NUMBER OF CYCLES AT 60Hz 100
FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
100
INSTANTANEOUS FORWARD CURRENT. (A)
FIG.4- TYPICAL REVERSE CHARACTERISTICS
1000
Tj=100 0C
INSTANTANEOUS REVERSE CURRENT. ( A)
100
10
Tj=50 0C
Tj=100 0C 10
1
Tj=50 0C 1
0.1
0.1
Pulse Width=300 s 1% Duty Cycle 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6
0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)
FORWARD VOLTAGE. (V)
FIG.5- TYPICAL JUNCTION CAPACITANCE
100
Tj=25 0C f=1.0MHz Vsig=50mVp-p
JUNCTION CAPACITANCE.(pF)
10
1 0.1
1 REVERSE VOLTAGE. (V)
10
100
- 363 -
很抱歉,暂时无法提供与“UG06B”相匹配的价格&库存,您可以联系我们找货
免费人工找货