W02M

W005M THRU W10M Single Phase 1.5 AMPS. Silicon Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 1.5 Amperes Features UL Recognized File # E-96005 Surge overload ratings to 40 amperes peak Ideal for printed circuit board Reliable low cost construction technique results in inexpensive product High temperature soldering guaranteed: 260℃/ 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs. ( 2.3 Kg ) tension WOB Mechanical Data Case: Molded plastic Lead: Solder plated Polarity: As marked Weight: 1.10 grams Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol W005M W01M W02M W04M W06M W08M W10M Units Type Number Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V VRRM Maximum RMS Voltage 35 70 140 280 420 560 700 V VRMS Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V VDC Maximum Average Forward Rectified Current @TA = 50℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 1.5A Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=100℃ Typical thermal Resistance (Note) Operating Temperature Range Storage Temperature Range I(AV) IFSM VF IR RθJA RθJL TJ 1.5 40 1.0 10 500 36 13 -55 to +125 -55 to +150 A A V uA uA ℃/W ℃ ℃ TSTG Note: Thermal Resistance from Juncton to Ambient and from Junction to Lead Mounted on P.C.B. At 0.375” (9.5mm) Lead Lengths with 0.4 x 0.4” (10 x 10mm) Copper Pads. - 664 - RATINGS AND CHARACTERISTIC CURVES (W005M THRU W10M) FIG.1- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT 50 1.6 FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT. (A) 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 40 PEAK FORWARD SURGE CURRENT. (A) 40 30 20 10 0 1 2 10 20 40 60 100 20 60 80 o 100 120 140 NUMBER OF CYCLES AT 60Hz AMBIENT TEMPERATURE. ( C) FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER BRIDGE ELEMENT 20 10 FIG.4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 10 INSTANTANEOUS FORWARD CURRENT. (A) INSTANTANEOUS REVERSE CURRENT. ( A) Tj=100 0C 1 1 Tj=25oC Pulse Width=300 s 1% Duty Cycle 0.1 0.1 Tj=25 0C 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.01 0 20 40 60 80 100 120 140 FORWARD VOLTAGE. (V) PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) - 665 -