CHA5052-QGG

CHA5052-QGG RoHS COMPLIANT 7-16GHz High Power Amplifier GaAs Monolithic Microwave IC in SMD package Description The CHA5052-QGG is a three-stage monolithic high power amplifier. The circuit is manufactured with a power PHEMT process, 0.15µm gate length, via holes through the substrate. It is supppplied in RoHS compliant SMD package. 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 6 7 8 9 Main Features ■ Frequency range 7-16GHz ■ Gain: 19dB ■ 37dBm 3rd order intercept point ■ 29dBm Output Power @1dB compression ■ ESD protected (see page 7) ■ DC power consumption, 700mA @ 5V ■ 28LQFN5x5 P1dB (dBm) Linear Gain (dB) 10 11 12 Frequency (GHz) 13 14 15 16 Typical on board measurements Main Characteristics Tamb. = 25° Vd = 5V C, Symbol Fop Parameter Operating frequency range Small signal gain Output power at 1dB gain compression Output IP3 Min 7 Typ Max 16 Unit GHz dB dBm dBm G_lin P1dB OIP3 19 29 37 ESD Protection: Electrostatic discharge sensitive device. Observe handling precautions! Ref : DSCHA5052QGG7033 - 02 Feb 07 1/10 /Specifications subject to change without notice United Monolithic Semiconductors S.A.S. Route Départementale 128 - B.P.46 - 91401 Orsay Cedex France Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09 CHA5052-QGG Electrical Characteristics 7- 16GHz High Power Amplifier Tamb=25° Vd = 5V and Id = 700mA, CW biasing mode. C, These values are representative of onboard measurements as defined on the drawing 96402 Symbol Fop G_lin Parameter Operating frequency range Small signal gain from 7 to 12GHz from 12.5 to 16GHz P1dB Psat IS11I IS22I OIP3 Output power at 1dB compression Saturated output power Input return loss Output return loss Output IP3 from 7 to 8GHz from 9 to 16GHz Vg Vd 1,2,3 Id Negative gate bias voltage Positive drain bias voltage Power supply quiescent current (1) Min 7 20 18 29 30 1.4:1 2.0:1 38 36 -1.7 5 700 dBm dBm V V mA Typ Max 16 Unit GHz dB dB dBm dBm (1) This value is fixed by gate voltage Vg Absolute Maximum Ratings Tamb. = 25° (1) C Symbol Vd Id Vg Pin Tj Top Tstg Parameter Maximum Drain bias voltage Power supply quiescent current Gate bias voltage Maximum input power overdrive Maximum channel temperature (2) Operating temperature range Storage temperature range Values +5.5 800 -4 to +0.8 +13.0 +175 -40 to +80 -55 to +125 Unit V mA V dBm ° C ° C ° C (1) Operation of this device above anyone of these parameters may cause permanent damage. (2) Thermal Resistance channel to ground paddle =26.9° C/W for Tpaddle. = +80° C Ref: DSCHA5052QGG7033 - 02 Feb 07 2/10 /Specifications subject to change without notice Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09 7-16GHz High Power Amplifier Typical Package Sij parameters Tamb = +25° Vd1=Vd2=Vd3= +4.5V, Id = 700 mA C, Freq (GHz) 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 5,0 5,5 6,0 6,5 7,0 7,5 8,0 8,5 9,0 9,5 10,0 10,5 11,0 11,5 12,0 12,5 13,0 13,5 14,0 14,5 15,0 15,5 16,0 16,5 17,0 17,5 18,0 18,5 19,0 19,5 20,0 20,5 21,0 21,5 22,0 22,5 23,0 23,5 24,0 24,5 25,0 25,5 26,0 26,5 27,0 27,5 28,0 28,5 29,0 29,5 30,0 CHA5052-QGG dB (S11) -1,9 -2,9 -4,1 -5,6 -7,1 -8,5 -9,9 -11,4 -12,9 -14,3 -15,8 -17,5 -19,8 -22,7 -27,2 -33,5 -28,9 -23,6 -20,5 -18,7 -18,8 -18,5 -18,1 -18,1 -18,7 -19,6 -20,8 -21,2 -24,0 -31,6 -40,9 -24,2 -19,2 -17,2 -16,4 -16,7 -17,8 -19,3 -21,1 -22,5 -22,7 -21,7 -19,8 -17,9 -16,3 -15,1 -14,0 -12,9 -11,9 -11,0 -10,5 -11,4 -14,1 -14,0 -11,4 -9,5 -8,4 -7,5 -6,9 -6,5 P (S11) (° ) 152 126 104 84 64 47 29 12 -6 -24 -42 -62 -83 -107 -137 157 62 20 -9 -33 -60 -83 -106 -125 -143 -158 -170 172 155 137 -78 -96 -126 -148 -175 161 138 118 92 60 27 -6 -34 -54 -70 -84 -95 -105 -116 -128 -143 -158 -161 -143 -141 -148 -156 -165 -174 177 dB (S21) -44,6 -48,8 -47,8 -35,0 -46,5 -18,6 -13,5 -5,1 6,3 14,0 18,3 20,6 21,7 22,2 22,3 22,1 21,8 21,5 21,3 21,2 21,1 21,0 21,0 20,9 20,6 20,2 19,9 19,1 18,7 18,4 18,5 18,3 16,8 12,8 7,2 0,8 -6,3 -14,4 -23,3 -33,7 -49,8 -49,2 -57,5 -48,3 -56,6 -54,6 -4,3 -42,4 -39,3 -41,2 -44,1 -40,9 -41,3 -47,5 -42,8 -42,0 -38,9 -36,4 -3,6 -36,7 P (S21) (° ) 27 -29 -137 78 55 47 -17 -34 -95 -175 103 26 -43 -107 -166 137 84 33 -16 -66 -115 -163 147 96 45 -6 -60 -114 -167 138 77 7 -73 -155 130 60 -4 -62 -111 -151 -152 -121 -144 -122 100 86 48 19 -11 -35 -62 -50 -74 -71 -86 -77 -94 -95 -105 -119 dB (S12) -62,4 -84,2 -71,5 -71,5 -71,6 -83,1 -70,9 -68,5 -81,3 -65,3 -69,6 -69,2 -62,8 -66,2 -67,8 -62,3 -67,4 -69,0 -59,5 -62,1 -67,5 -58,0 -59,2 -58,0 -58,0 -57,9 -61,1 -56,6 -56,7 -56,1 -52,6 -52,7 -51,9 -49,1 -61,8 -55,8 -50,4 -52,2 -50,3 -49,7 -49,9 -54,0 -57,8 -51,6 -50,2 -51,1 -49,5 -46,9 -45,5 -43,9 -44,8 -42,2 -41,5 -42,1 -41,6 -39,0 -37,9 -37,8 -37,2 -36,6 P (S12) (° ) -29 -119 -21 -112 111 -62 156 43 -119 83 27 94 40 3 28 -5 -54 -60 -77 -129 -153 -166 162 142 112 81 143 95 81 92 80 54 50 12 22 56 29 12 2 1 -23 -32 -4 7 -7 -19 7 -9 -15 -30 -33 -39 -53 -62 -63 -71 -89 -104 -115 -127 dB (S22) -1,7 -1,5 -1,5 -1,5 -1,3 -1,2 -1,2 -1,4 -2,0 -3,8 -7,9 -14,7 -18,8 -18,0 -17,9 -18,8 -20,6 -23,9 -30,3 -28,2 -20,6 -16,9 -14,0 -12,8 -12,7 -14,5 -13,5 -12,1 -10,7 -10,2 -10,1 -10,0 -10,1 -10,9 -12,5 -11,4 -6,9 -4,0 -2,6 -1,9 -1,6 -1,4 -1,3 -1,2 -1,1 -1,0 -0,9 -0,9 -87,2 -79,4 -76,4 -79,8 -75,6 -73,6 -69,0 -65,7 -65,3 -77,5 -90,4 -0,9 P (S22) (° ) 149 118 88 57 27 -4 -35 -68 -104 -143 -180 161 -179 -173 177 164 149 141 156 -141 -146 -159 -175 168 148 135 135 121 102 71 30 -22 -86 -139 -168 -167 174 143 112 83 58 35 14 -6 -24 -41 -57 -72 -85 -97 -109 -121 -131 -141 -151 -161 -170 -178 173 164 Refer to the “definition of the Sij reference planes” section below Ref: DSCHA5052QGG7033 - 02 Feb 07 3/10 /Specifications subject to change without notice Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09 CHA5052-QGG Typical Measured Performance 7- 16GHz High Power Amplifier Tamb = +25° Vd1=Vd2=Vd3=+5V, Id (Quiescent)=700mA , CW biasing mode C, Measurements in the package access planes, using the proposed land pattern & board 96402 Gain variation versus temperature 24 22 20 18 S21 (dB) 16 14 12 10 8 6 Tamb=25° C Tamb= -40° C Tamb= +75° C 4 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Frequency (GHz) Return losses versus temperature @ 25° C 0 -5 -10 -15 S11, S22 (dB) -20 -25 -30 -35 S11 -40 -45 0 2 4 6 8 S22 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 Frequency (GHz) Ref: DSCHA5052QGG7033 - 02 Feb 07 4/10 /Specifications subject to change without notice Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09 7-16GHz High Power Amplifier CHA5052-QGG Output power@ 1dB compression & linear Gain versus temperature 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 6 7 P1dB (dBm) Linear Gain (dB) Tamb= -40° C Tamb= +25° C Tamb= +75° C 8 9 10 11 12 Frequency (GHz) 13 14 15 16 Drain current versus Pin & Temperature @ RFfreq= 14GHz 1000 950 900 850 Drain current (mA) 800 750 700 650 600 550 500 450 400 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 Input power (dBm) 2 4 6 8 10 12 +25° C +75° C -40° C Ref: DSCHA5052QGG7033 - 02 Feb 07 5/10 /Specifications subject to change without notice Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09 CHA5052-QGG 7- 16GHz High Power Amplifier Gain & Pout versus Pin @ RFfreq=7GHz, 25° C 32 30 28 26 24 22 20 18 16 14 12 10 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 Input power (dBm) 2 4 6 8 10 12 Output power (dBm) Gain (dB) Gain & Pout versus Pin @ RFfreq=15GHz, 25° C 32 30 28 26 24 22 20 18 16 14 12 10 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 Input power (dBm) 2 4 6 8 10 12 Output power (dBm) Gain (dB) Ref: DSCHA5052QGG7033 - 02 Feb 07 6/10 /Specifications subject to change without notice Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09 7-16GHz High Power Amplifier CHA5052-QGG C/I3 versus Pout DCL at Temperature –40, +25, +75° C Frequency 7 to 10GHz Frequency 12 to 16GHz Ref: DSCHA5052QGG7033 - 02 Feb 07 7/10 /Specifications subject to change without notice Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09 CHA5052-QGG Note 7- 16GHz High Power Amplifier Due to ESD protection, RFin and RFout are DC grounded, an external capacitance might be requested to isolate the product from external voltage that could be present on the RF accesses. 26 Vd1, 2 Vd1, 5 RFin 23 Vd3 17 RFout Vg1, 2 9 Vg3 Vd3 11 13 ESD protections are also implemented on gate accesses. The DC connections do not include any decoupling capacitor in package, therefore it is mandatory to provide a good external DC decoupling on the PC board, as close as possible to the package. Definition of the Sij reference planes The reference planes are defined from the footprint of the recommended characterization board shown below under the number 96402. The reference is the symmetrical axis of the package. The input and output reference planes are located at 3.66mm offset (input wise and output wise respec.) from this axis. Then, the given Sij incorporates this land pattern. Ref: DSCHA5052QGG7033 - 02 Feb 07 8/10 /Specifications subject to change without notice Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09 7-16GHz High Power Amplifier Package outline CHA5052-QGG SMD mounting procedure The SMD leadless package has been designed for high volume surface mount PCB assembly process. The dimensions and footprint required for the PCB (motherboard) are given in the drawings above. For the mounting process standard techniques involving solder paste and a suitable reflow process can be used. For further details, see application note AN0017. Ref: DSCHA5052QGG7033 - 02 Feb 07 9/10 /Specifications subject to change without notice Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09 CHA5052-QGG 7- 16GHz High Power Amplifier Proposed Assembly board “96402” for the 28L-QFN5x5 products characterization. Compatible with the proposed footprint. Based on typically Ro4003 / 8mils or equivalent. Using a microstrip to coplanar transition to access the package. Recommended for the implementation of this product on a module board. - via holes Φ0.3 Metallised pads for tuning Ordering Information QFN 5x5 RoHS compliant package: CHA5052-QGG/XY Stick: XY = 20 Tape & reel: XY = 21 Information furnished is believed to be accurate and reliable. However United Monolithic Semiconductors S.A.S. assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of United Monolithic Semiconductors S.A.S.. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. United Monolithic Semiconductors S.A.S. products are not authorised for use as critical components in life support devices or systems without express written approval from United Monolithic Semiconductors S.A.S. Ref: DSCHA5052QGG7033 - 02 Feb 07 10/10 /Specifications subject to change without notice Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09