CHM1191
K Band Mixer
GaAs Monolithic Microwave IC Description
The CHM1191 is a balanced Schottky diode mixer based on a six quarter wave ring structure. It could be use in receiver or transmitter part. This circuit is manufactured with the BESMMIC process: 1 µm Schottky diode device, air bridges, via holes through the substrate, stepper lithography. An electrically identical chip with a mirror drawing versus de LO side is available under the part number CHM1190. These two MMICs could be helpful in a TX, RX architecture module. It is available in chip form.
Conversion gain (dB)
LO
IF
RF
-2
IF=2GHz
-4 -6 -8 -10 -12 21 22 23 LO Frequency (GHz) 24 25
Main Features
■ 22-24 GHz LO frequency range ■ IF from 1 to 3 GHz ■ Low conversion loss up & down ■ High LO/RF isolation ■ Low LO input power ■ Small chip size: 1.73 x 1.53 x 0.10 mm
Typical conversion characteristic (measurement in test fixture)
Main Characteristics
Tamb. = 25°C
Symbol
F_LO, F_IF Lc I_LO/RF
Parameter
LO frequency range IF frequency range Conversion loss @ P-LO = 7dBm LO/RF isolation
Typ
22-24 1-3 7 30
Unit
GHz GHz dB dBc
ESD Protection : Electrostatic discharge sensitive device. Observe handling precautions !
Ref. :DSCHM11919025
1/6
Specifications subject to change without notice
United Monolithic Semiconductors S.A.S.
Route Départementale 128 - B.P.46 - 91401 Orsay Cedex France Tel. : +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09
CHM1191
Electrical Characteristics
Tamb. = 25°C
Symbol
F_LO F_IF Lc P_LO P-1dB VSWR_LO VSWR_RF VSWR_IF I_LO/RF
K band Mixer
Parameter
LO frequency range IF frequency range Conversion loss @ P-LO = 7dBm (1) LO input power Input 1dB compression LO port VSWR (50Ω) (2) RF port VSWR (50Ω) (2) RF port VSWR (50Ω) (2) LO/RF isolation
Min
22 1
Typ
Max
24 3
Unit
GHz GHz dB
7 5 7 7 2.5:1 2.5:1 2.5:1 30 9
dBm dBm
dBc
(1) On wafer measurements. (2) Depends on the wire bonding conditions and on the external matching network.
Absolute Maximum Ratings (1)
Tamb = +25°C
Symbol P_LO P_RF P_IF Top Tstg Parameter Maximum peak input power overdrive at LO port (2) Maximum peak input power overdrive at RF port (2) Maximum peak input power overdrive at IF port (2) Operating temperature range Storage temperature range Values 10 10 10 -40 to +85 -55 to +125 Unit dBm dBm dBm °C °C
(1) Operation of this device above anyone of these parameters may cause permanent damage. (2) Duration < 1s
Ref. : DSCHM11919025
2/6
Specifications subject to change without notice
Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09
K Band Mixer
Typical test fixture measurements
Tamb. = 25°C
A) Down- converter
-2 -2
CHM1191
IF=2GHz
Conversion gain (dB) -4 -6 -8 -10 -12 21 22 23 LO Frequency (GHz) 24 25 Conversion gain (dB) -4 -6 -8 -10 -12 0
LO=23GHz
1
2 IF Frequency (GHz)
3
4
Conversion gain versus LO frequency LO Input power= 9dBm (1)
Conversion gain versus IF frequency LO Input power= 9dBm (1)
B) Up- converter
-2 Conversion gain (dB) Conversion gain (dB) -4 -6 -8 -10 -12 21 22 23 LO Frequency (GHz) 24 25 -2
IF=2GHz
-4 -6 -8 -10 -12 0
LO=23GHz
1
2 IF Frequency (GHz)
3
4
Conversion gain versus LO frequency LO Input power= 9dBm (1)
Conversion gain versus IF frequency LO Input power= 9dBm (1)
2 Conversion gain (dB)
2 Conversion gain (dB)
0 -2 -4 -6 -8 -10 -12 0
IF=2GHz LO=23GHz
0 -2 -4 -6 -8 -10 -12
IF=2GHz LO=23GHz
1
2
3
4
5
6
7
8
9
10
RF Input power (dBm)
-5 -4 -3 -2 -1
0
1
2
3
4
5
6
7
8
9 10
IF Input power (dBm)
Input compression point versus RF power LO Input power= 9dBm (1)
Input compression point versus IF power LO Input power= 9dBm (1)
Ref. : DSCHM11919025
3/6
Specifications subject to change without notice
Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09
CHM1191
K band Mixer
0 Return loss (dB) Return loss (dB) -5 -10 -15 -20 -25 21 22 23 LO frequency (GHz) 24 25
0 -5 -10 -15 LO=23GHz -20 -25 22 23 24 RF frequency (GHz) 25 26
LO Return loss (1) LO input power = 9dBm
RF Return loss (1) LO input power = 9dBm
0 Return loss (dB) -5 -10 -15 -20 -25 0 1 2 IF frequency (GHz) 3 4 OL=23GHz
IF Return loss
LO input power = 9dBm
(1) This measurement is made with an external matching network. See application note for further information.
Ref. : DSCHM11919025
4/6
Specifications subject to change without notice
Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09
K Band Mixer
Chip Mechanical Data
(dimensions are in µm)
CHM1191
70
1730 +/- 35
1020 96 300
180 1530 +/- 35
Chip size (including saw streets) : 1730 x 1530 ± 35µm Thickness: 100µm ± 10µm
Pin LO RF IF LO input signal
Description
RF input or output signal IF input or output signal
An electrically identical chip with a mirror drawing versus de LO side is available under the part number CHM1190.
Ref. : DSCHM11919025
5/6
Specifications subject to change without notice
Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09
CHM1191
Application note
K band Mixer
1.1 0.35
2.1 0.54
εr ~ 2.2 h= 0.127 mm
Example of integration using low dielectric constant substrate : Er=2.2, heigh=0.127mm (dimensions are in mm)
In order to use acceptable wire bonding length, an external matching network is proposed for the LO input on low dielectric constant substrat.
Ordering Information
Chip form : CHM1191-99F/00
Information furnished is believed to be accurate and reliable. However United Monolithic Semiconductors S.A.S. assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of United Monolithic Semiconductors S.A.S.. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. United Monolithic Semiconductors S.A.S. products are not authorised for use as critical components in life support devices or systems without express written approval from United Monolithic Semiconductors S.A.S.
Ref. : DSCHM11919025
6/6
Specifications subject to change without notice
Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09
很抱歉,暂时无法提供与“CHM1191”相匹配的价格&库存,您可以联系我们找货
免费人工找货