16P8WGF2001T4E

DATA SHEET Product Name Chip Resistors Array Part Name 2F01/4F01/2C02/4C02/4C03/2D02/2D03/4D02/4D03/4DP3/16P8 Series File No. SMD-SP-024 Uniroyal Electronics Global Co., Ltd. 88#, Longteng Road, Economic & Technical Development Zone, Kunshan, Jiangsu, China Tel Email Manufacture Plant +86 512 5763 1411 / 22 /33 marketing@uni-royal.cn Uniroyal Electronics Industry Co., Ltd. Aeon Technology Corporation Royal Electronic Factory (Thailand) Co., Ltd. Royal Technology (Thailand) Co., Ltd. Chip Resistors Array 1. Scope 1.1 This datasheet is the characteristics of chip resistors array manufactured by UNI-ROYAL. 1.2 High density，more than 1 resistors in one small case 1.3 Improvement of placement efficiency 1.4 Tape/Reel packaging is suitable for automatic placement machine 1.5 Superior solderability 1.6 Application：Master board，CD&DVD Rom，Hard Disk，RAM 2. Part No. System Part No. includes 14 codes shown as below: 2.1 1st~4th codes: Part name.E.g.: 2D02,4D02,2D03,4D03,4DP3,16P8,2C02, 4C02, 4C03,2F01,4F01. 2.2 5th~6th codes: Power rating. E.g.: W=Normal Size “1~G” = “1~16” Wattage 1/10 1/16 1/20 Normal Size WA WG WM If power rating is equal or lower than 1 watt, 5th code would be “W” and 6th code would be a number or letter. E.g.: WA=1/10W W4=1/4W 2.3 7th code: Tolerance. E.g.: D=±0.5% F=±1% G=±2% J=±5% K= ±10% 2.4 8th~11th codes: Resistance Value. 2.4.1 If value belongs to standard value of E-24 series, the 8th code is zero, 9th~10th codes are the significant figures of resistance value, and the 11th code is the power of ten. 2.4.2 If value belongs to standard value of E-96 series, the 8th~10th codes are the significant figures of resistance value, and the 11th code is the power of ten. 2.4.311th codes listed as following: 0=100 1=101 2=102 3=103 4=104 5=105 6=106 J=10-1 K=10-2 L=10-3 M=10-4 th th 2.5 12 ~14 codes. 2.5.1 12th code: Packaging Type. E.g.: T=Tape/Reel 2.5.2 13th code: Standard Packing Quantity. 4=4,000pcs 5=5,000pcs C=10,000pcs E=15,000pcs 2.5.3 14th code: Special features. E = Environmental Protection, Lead Free, or Standard type. 3. Ordering Procedure (Example: 4C02 1/16W ±5% 100Ω T/R-10000 ) 4 C 0 2 Product Type: Fill-in 4 digits with the chip resistor type as follows: 2F01 4F01 2D02 2D03 4D03 4D02 4DP3 2C02 4C02 4C03 16P8 W G Wattage: WM=1/20W WG=1/16W WA=1/10W Tolerance: F=±1% J=±5% J 0 1 0 1 T Resistance Value: 5% (E-24 series): 1st code is zero, 2nd~3rd codes are the significant figures of resistance value, and the rest code is the power of ten. 1% (E-96 series): 1st~3rd codes are the significant figures of resistance value and the rest code is the power of ten. J=10-1; K=10-2; L=10-3 C E Packing quantity: 2F01,4F01: E=15000PCS 2D02,4D02,2C02, 4C02: C=10000PCS 2D03,4D03,4DP3, 4C03: 5=5000PCS 16P8: 4=4000PCS Special Feature E= Lead-Free Packing Type: T=Tape/Reel Oct.26,2022 V.6 www. uni-royal.cn Page 2/9 Chip Resistors Array 4. Marking 4.1 Normal for 2D02 & 2C02 & 4C02 size, no marking on the body, 0Ω resistors is no marking too. 2D02 2C02 4C02 4.2 ±5% Tolerance of 4D02, 2D03, 4D03, 4DP3,4C03 and 16P8 size: the first two digits are significant figures of resistance and the third denotes number of zeros following . 2D03 4C03 4D02, 4D03,4DP3 16P8 4.3 ±1%Tolerance of 2D03,4D02, 4D03, 4DP3,4C03 and 16P8 size: first three digits are significant figures of resistance and the fourth denotes numberof zeros following 2D03 4C03 4D02,4D03,4DP3 16P8 4.4 0Ω：Normal of 2D03,4D02,4D03,4C03,16P8 size, the marking as following: 2D03 4C03 4D02,4D03,4DP3 16P8 4.5 Normal for 2F01，4F01 sizes, no marking on the body.0Ω resistors is no marking too 2F01 Oct.26,2022 V.6 4F01 www. uni-royal.cn Page 3/9 Chip Resistors Array 5. Dimension 5.1 Equivalent Circuit Diagram： 2D02/2D03 /2C02/2F01 4D02/4D03 /4C02/4C03/4F01 R1=R2 R1=R2=R3=R4 16P8 R1=R2=R3=R4=R5=R6=R7=R8 5.2 Dimensions in mm： Convex Terminal type 4D02/4D03 2D02/2D03 16P8 Concave Terminal 2C02 4C02/4C03 Flat Terminal 2F01 Type 2D02(0402*2) 4D02(0402*4) 2D03(0603*2) 4D03/4DP3(0603*4) 16P8 2C02(0402*2) 4C02(0402*4) 4C03(0603*4) 2F01(0201*2) 4F01(0201*4) Oct.26,2022 V.6 L 1.00±0.10 2.00±0.10 1.60±0.15 3.20±0.20 4.00±0.20 1.00±0.10 2.00±0.10 3.20±0.20 0.80±0.10 1.40±0.10 4F01 W 1.00±0.10 1.00±0.10 1.60±0.15 1.60±0.20 1.60±0.15 1.00±0.10 1.00±0.10 1.60±0.20 0.60±0.10 0.60±0.10 T 0.35±0.10 0.45±0.10 0.50±0.10 0.50±0.10 0.45±0.10 0.35±0.10 0.45±0.10 0.60±0.10 0.35±0.10 0.35±0.10 Dimensions （mm） A1 A2 0.33±0.10 / 0.40±0.05 0.30±0.05 0.60±0.15 / 0.65±0.15 0.50±0.15 0.45±0.05 0.30±0.05 / / / / / / 0.30±0.10 / 0.20±0.10 / www. uni-royal.cn B 0.15±0.05 0.20±0.15 0.30±0.10 0.30±0.15 0.30±0.15 0.15±0. 10 0.15±0.10 0.30±0.20 0.15±0.10 0.15±0.10 P 0.65±0.05 0.50±0.05 0.80±0.05 0.80±0.10 0.50±0.05 / / / 0.50±0.05 0.40±0.05 G 0.25±0.10 0.30±0.15 0.25±0.10 0.30±0.15 0.40±0.15 0.30±0.10 0.30±0.10 0.40±0.10 0.15±0.10 0.15±0.10 Page 4/9 Chip Resistors Array 6. Resistance Range Type Rated power Max Working Voltage Max Overload Voltage Dielectric Withstanding Voltage Resistance Range ±5%±1% Temperature Coefficient PPM/℃ 2D02 4D02 2D03 1/16W 1/16W 1/16W 50V 50V 50V 100V 100V 100V 100V 100V 100V 10Ω~1MΩ 10Ω~1MΩ 10Ω~1MΩ 4D03 1/16W 50V 100V 300V 1Ω~1MΩ 4DP3 1/10W 50V 100V 300V 1Ω~1MΩ 16P8 1/16W 50V 100V 300V 1Ω~1MΩ 2C02 4C02 1/16W 1/16W 50V 50V 100V 100V 100V 100V 10Ω~1MΩ 10Ω~1MΩ 4C03 1/10W 50V 100V 300V 1Ω~1MΩ 2F01 4F01 1/20W 1/20W 12.5V 12.5V 25V 25V / / 10Ω~1MΩ 10Ω~1MΩ ±200 ±200 ±200 ≥10Ω:±200 ＜10Ω:±400 ≥10Ω:±200 ＜10Ω:±400 ≥10Ω:±200 ＜10Ω:±400 ±200 ±200 ≥10Ω:±200 ＜10Ω:±400 ±200 ±200 Operating Temperature Resistance Value of Jumper Rated Current of Jumper -55℃~+155℃