BR108

BR1005 THRU BR1010 SINGLE PHASE 10 AMP BRIDGE RECTIFIERS VOLTAGE RANGE 50 to 1000 Volts CURRENT 10.0 Amperes BR-10 FEATURES * Low forward voltage * Low leakage current * Mounting: Hole thru for #6 screw * Mounting position: Any .770(19.6) .730(18.5) HOLE FOR NO. 6 SCREW AC .296(7.5) .255(6.5) .052(1.3) DIA. .048(1.2) TYP. .750 MIN. (19.1) .520(13.2) .770(19.6) .480(12.2) .730(18.5) AC + Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 C ambient temperature uniess otherwies specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375"(9.5mm) Lead Length at Tc=50 C Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage Drop per Bridge Element at 5.0A D.C. Maximum DC Reverse Current Ta=25 C at Rated DC Blocking Voltage Operating Temperature Range, TJ Storage Temperature Range, TSTG Ta=100 C BR1005 BR101 BR102 BR104 BR106 BR108 BR1010 UNITS 50 35 50 100 70 100 200 140 200 400 280 400 10 200 1.1 10 -65 -65 200 +125 +150 600 420 600 800 560 800 1000 700 1000 V V V A A V A A C C RATING AND CHARACTERISTIC CURVES (BR1005 THRU BR1010) FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE 12 10 8 6 4 2 0 Single Phase Half Wave 60Hz Resistive Or Inductive Load FIG.2-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT,(A) 250 AVERAGE FORWARD CURRENT,(A) 200 150 Tj=25 C 8.3ms Single Half Sine Wave JEDEC method 100 50 0 25 50 75 100 125 150 175 CASE TEMPERATURE,( C) 0 1 5 10 50 100 NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL FORWARD CHARACTERISTICS 50 INSTANTANEOUS FORWARD CURRENT,(A) FIG.4-TYPICAL REVERSE CHARACTERISTICS 50 REVERSE LEAKAGE CURRENT, ( A) 10 3.0 1.0 Tj=25 C Pulse Width 300us 1% Duty Cycle 10 3.0 1.0 0.1 0.1 Tj=25 C .01 0 .2 .4 .6 .8 1.0 1.2 1.4 .01 0 20 40 60 80 100 120 140 FORWARD VOLT AGE,(V) PERCENT OF RATED PEAK REVERSE VOLT AGE, (%)