GBJ804

GBJ801 THRU GBJ807 SINGLE PHASE 8.0 AMP BRIDGE RECTIFIERS VOLTAGE RANGE 50 to 1000 Volts CURRENT 8.0 Amperes GBJ 1.193(30.3) 1.169(29.7) .134(3.4) .122(3.1) .203(5.2) .189(4.8) .150(3.8) .134(3.4) .441(11.2) .425(10.8) FEATURES * Ideal for printed circuit board * Low forward voltage * Low leakage current * Mounting position: Any .094(2.4) .078(2.0) .043(1.1) .035(0.9) ~ ~ .165(4.2) .150(3.8) .708(18.0) .669(17.0) .800(20.3) .776(19.7) .189 (4.8) .402(10.2) .303(7.7) .303(7.7) SPACING .386(9.8) .287(7.3) .287(7.3) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 C ambient temperature uniess otherwies specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. + .114(2.9) .098(2.5) .031(0.8) .023(0.6) Dimensions in inches and (millimeters) TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward (with heatsink Note 2) Rectified Current at Tc=110 C (Without heatsink) Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage Drop per Bridge Element at 4.0A D.C. Maximum DC Reverse Current Ta=25 C at Rated DC Blocking Voltage Typical Thermal Resistance RqJC (Note 1) Typical Thermal Resistance RqJL (Note 2) Operating Temperature Range, TJ Storage Temperature Range, TSTG NOTES: GBJ801 GBJ802 GBJ803 GBJ804 GBJ805 GBJ806 GBJ807 UNITS 50 35 50 100 70 100 200 140 200 400 280 400 8.0 2.9 170 1.0 5.0 500 2.8 5.5 -55 -55 +150 +150 600 420 600 800 560 800 1000 700 1000 V V V A A A V mA mA C/W C/W C C Ta=100 C 1. Thermal Resistance from Junction to Case with device mounted on 100mm x 100mm x 1.6mm Cu Plate Heatsink. 2. Thermal Resistance from Junction to Lead without Heatsink. RATING AND CHARACTERISTIC CURVES (GBJ801 THRU GBJ807) FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT,(A) FIG.2-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT,(A) 9 8 7 6 5 4 3 2 1 0 WITHOUT HEATSINK Single Phase Half Wave 60Hz Resistive Or Inductive Load WITH HEATSINK 250 200 150 Tj=25 C 8.3ms Single Half Sine Wave JEDEC method 100 50 0 1 5 10 NUMBER OF CYCLES AT 60Hz 0 20 40 60 80 100 120 140 160 CASE TEMPERATURE,( C) 50 100 FIG.3-TYPICAL FORWARD CHARACTERISTICS 50 INSTANTANEOUS FORWARD CURRENT,(A) FIG.4-TYPICAL REVERSE CHARACTERISTICS 50 3.0 1.0 Tj=25 C Pulse Width 300us 1% Duty Cycle REVERSE LEAKAGE CURRENT, (mA) 10 10 3.0 1.0 Tj=100 C 0.1 0.1 Tj=25 C .01 0 .2 .4 .6 .8 1.0 1.2 1.4 .01 0 20 40 60 80 100 120 140 FORWARD VOLT AGE,(V) PERCENT OF RATED PEAK REVERSE VOLT AGE, (%)