HP0707F0000T5E

DATA SHEET Product Name High-Power Thick Film Chip Resistors Part Name HP Series Uniroyal Electronics Global Co., Ltd. 88 Longteng Road, Economic & Technical Development Zone, Kunshan, Jiangsu, China Tel Email Manufacture Plant +86 512 5763 1411 / 22 /33 marketing@uni-royal.cn Uniroyal Electronics Industry (kunshan) co., ltd. Uniroyal Electronics Industry Co., Ltd. Uniroyal Electronics Global Co.,Ltd Shenzhen Branch Aeon Technology Corporation Uniroyal Electronics Global Co.,Ltd Xiamen Branch Kunshan Foss Electronic material Co., Ltd. Royal Electronic Factory (thailand) co., ltd Brands RoyalOhm UniOhm High-Power Thick Film Chip Resistors - Data Sheet 1. Scope 1.1 This specification for approve relates to the High Power Thick Film Chip Resistors manufactured by UNI-ROYAL. 1.2 High power standard size 1.3 Suitable for both wave & re-flow soldering 1.4 Application：AV adapters，LCD back-light，camera strobe ect. 2. Explanation of Part No. System Part No. includes 14 codes shown as below: 2.1 1st~4th codes: Part name. E.g.: HP02、HP03、HP05、HP06、HP07、HP10、HP11、HP12 2.2 5th~6th codes: Power rating. E.g.: W=Normal Size “1~G” = “1~16” Wattage 1/32 3/4 1/2 1/3 1/4 1/8 1/10 1/16 1/20 1 Normal Size WH 07 W2 W3 W4 W8 WA WG WM 1W If power rating is lower or equal than 1 watt, 5th code would be “W” and 6th code would be a number or letter. E.g.: WA=1/10W W4=1/4W 2.3 7th code: Tolerance. E.g.: D=±0.5% F=±1% G=±2% J=±5% K= ±10% 2.4 8th~11th codes: Resistance Value. 2.4.1 If value belongs to standard value of ≥5% series, 8th code would be zero,9th~10th codes are significant figures of the resistance and 11th code is the power of ten. 2.4.2 If value belongs to standard value of ≤2% series, 8th~10th codes are significant figures of the resistance, and 11th code is the power of ten. 2.4.311th codes listed as following: 0=100 1=101 2=102 3=103 4=104 5=105 6=106 J=10-1 K=10-2 L=10-3 M=10-4 th th 2.5 12 ~14 codes. 2.5.1 12th code: Packaging Type. E.g.: C=Bulk T=Tape/Reel 2.5.2 13th code: Standard Packing Quantity. 4=4000pcs 5=5000pcs C=10000pcs D=20000pcs E=15000pcs Chip Product: BD=B/B-20000pcs TC=T/R-10000pcs 2.5.3 14th code: Special features. E = Environmental Protection, Lead Free, or Standard type. 3. Ordering Procedure (Example: HP12 2W ±5% 10KΩ T/R-4000) H P 1 2 Product Type: Fill-in 4 digits with the chip resistor type as follows: HP02 HP03 HP05 HP06 HP07 HP10 HP11 HP12 2 W Wattage: WA=1/10W W5=1/5W W3=1/3W W2=1/2W 07=3/4W 1W=1W 1Q=1.25W 2W=2W J 0 1 0 3 T Resistance Value: 5%(E-24 series): The 1st digit will be “0”; the 2nd & 3rd digits are for the significant figures of the resistance and the 4th digit indicate the numbers of zeros following. 1%(E-96 series ): The 1st to 3rd digits are for the significant figures of the resistance and 4th digit denotes number of zeros following. 4 Packing quantity: 1=1000PCS 2=2000PCS 3=3000PCS 4=4000PCS 5=5000PCS C=10000PCS D=20000PCS J=10-1; K=10-2; L=10-3 Tolerance: F=±1% J=±5% Feb.12,2019 V.2 www.uniohm.com E Special Feature E= Lead-Free Packing Type: T=Tape/Reel Page 2/8 High-Power Thick Film Chip Resistors - Data Sheet 4. Marking (1) For HP02 size. Due to the very HP02 small size of the resistor’s body, there is no marking on the body. Normally, the making of 0 HP03, 0 HP05, 0 HP06,0Ω HP07， 0 HP10,0Ω HP11， 0 HP12, 0 SP12, resistors as following 0  0 (2) ±2%,5%Tolerance:The first two digits are significant figures of resistance and the third denotes number of zeros following 333  33K (3) ±0.5%、1% Tolerance: 4 digits, first three digits are significant; forth digit is number of zeros. Letter r is decimal point. 2701  2.7K (4) More than HP05 specifications (including) 4 digits, Product below 1Ω, show as following, the first digit Is “R” which as decimal point. R300  0.3 5. Dimension Dimension(mm) Type Feb.12,2019 V.2 L W H HP02(0402) 1.00±0.10 0.50±0.05 0.35±0.05 0.20±0.10 0.25±0.10 HP03(0603) 1.60±0.10 0.80±0.10 0.45±0.10 0.30±0.20 0.30±0.20 HP05(0805) 2.00±0.15 1.25+0.15/ -0.10 0.55±0.10 0.40±0.20 0.40±0.20 HP06(1206) 3.10±0.15 1.55+0.15/-0.10 0.55±0.10 0.45±0.20 0.45±0.20 HP07(1210) 3.10±0.10 2.60±0.20 0.55±0.10 0.50±0.25 0.50±0.20 HP10(2010) 5.00±0.10 2.50±0.20 0.55±0.10 0.60±0.25 0.50±0.20 HP11(1812) 4.50±0.20 3.20±0.20 0.55±0.20 0.50±0.20 0.50±0.20 HP12(2512) 6.35±0.10 3.20±0.20 0.55±0.10 0.60±0.25 0.50±0.20 www.uniohm.com A B Page 3/8 High-Power Thick Film Chip Resistors - Data Sheet 6. Resistance Range Type Size 70℃ Power HP02 0402 1/10W HP03 0603 1/5W HP05 0805 1/3W HP06 1206 1/2W HP07 1210 3/4W HP10 2010 1W HP11 1812 1.25W HP12 2512 2W Resistance Range of 1% & 5% Max.Work ing Voltage Max. Overload Voltage Dielectric withstanding Voltage 1Ω~10M 50V 100V 100V Rmax=10mΩ，Imax=3A 0Ω 0.1Ω~10M 0Ω 0.01Ω~10M 0Ω 0.01Ω~10M 0Ω 0.1Ω~10M 0Ω 0.01Ω~10M 75V 150V 200V 200V 200V 0Ω 150V Rmax=8mΩ，Imax=5A 300V Rmax=5mΩ，Imax=6A 400V Rmax=5mΩ，Imax=10A 500V Rmax=4mΩ，Imax=12A 500V 300V 500V 500V 500V 500V Rmax=5mΩ，Imax=12A 0.1Ω~10M 0Ω 0.01Ω~10M 200V 250V 0Ω 500V Rmax=5mΩ，Imax=12A 500V 500V 500V Rmax=5mΩ，Imax=16A Operating Temperature -55℃~155℃ -55℃~155℃ -55℃~155℃ -55℃~155℃ -55℃~155℃ -55℃~155℃ -55℃~155℃ -55℃~155℃ 7. Recommend the size of welding plate HP02 A 0.5±0.05 Dimension(mm) B C 0.5±0.05 0.6±0.05 HP03 HP05 HP06 HP07 HP10 HP11 HP12 0.8±0.05 1.0±0.1 2.0±0.1 2.0±0.1 3.6±0.1 3.0±0.1 4.9±0.1 0.8±0.05 1±0.1 1.1±0.1 1.1±0.1 1.4±0.1 1.4±0.1 1.35±0.1 Type 0.9±0.05 1.4±0.1 1.8±0.1 2.9±0.1 3±0.1 3.7±0.1 3.7±0.1 D 1.5±0.05 2.4±0.05 3±0.1 4.2±0.1 4.2±0.1 6.4±0.1 5.8±0.1 7.6±0.1 8. Derating Curve Resistors shall have a power rating based on continuous load operation at an ambient temperature from -55℃ to 70℃. For temperature in excess of 70℃, the load shall be derated as shown in figure 1 Figure 1 Feb.12,2019 V.2 www.uniohm.com Page 4/8 High-Power Thick Film Chip Resistors - Data Sheet 8.1Voltage rating: Resistors shall have a rated direct-current (DC) continuous working Voltage or an approximate sine-wave root-mean-square (RMS) alternating-current (AC) continuous working voltage at commercial-line frequency and waveform corresponding to the power rating, as determined from the following formula: RCWV = P  R Where: RCWV commercial-line frequency and waveform (Volt.) P = power rating (WATT.) R = nominal resistance (OHM) In no case shall the rated DC or RMS AC continuous working voltage be greater than the applicable maximum value. The overload voltage is 2.5 times RCWV or Max. Overload voltage whichever is less 8. Structure 9. Performance Specification Characteristic Limits Test Methods (GB/T5729&JIS-C-5201&IEC60115-1) HP02: 1Ω≤R≤10Ω: ±400 PPM/℃ 10Ω＜R≤100Ω: ±200 PPM/℃ 100Ω＜R≤10M: ±100 PPM/℃ HP03： 0.1Ω≤R＜0.2Ω: ±200PPM/℃ 0.2Ω≤R≤10M: ±100 PPM/℃ HP05： 10mΩ≤R≤15mΩ:±800ppm/°C 15mΩ