LE03WAJ0111T5E

Flex LED Strip use Thick Film Chip Resistors - LE UniOhm 软灯条专用电阻器 - LE系列 RoHS Compliant Feature (特性) • Suitable for reflow & wave soldering ( 适合波峰焊与回流焊 ) • Application Soft Circuit board ( 适用于软性电路板 ) Derating Curve (降功率曲线) Figures (型状) 负载比率(%) Percent rated load (%) 1. High purity Alumina substrate (高纯度氧化铝基板) 2. Protective coating (保护层) 3. Resistance element (阻抗元素) 4. Termination (Inner) Ni / Cr [端面(内)镍/铬层] 5. Termination (Between) Ni Barrier [端面(中)镍层] 6. Termination (Outer) Sn [端面(外)锡层(无铅)] Ambient termperature 环境温度 (°C) Specification (性能) Type Max working voltage Max Overload Voltage Dielectric Withstanding Voltage Operating Temperature 类型 最大工作电压 最大过负荷电压 绝缘耐压 工作温度范围 LE03 75V 150V 300V -55~+155ºC LE05 150V 300V 500V -55~+155ºC LE06 200V 400V 500V -55~+155ºC Type Power L (mm) W (mm) H (mm) A (mm) B (mm) 1/16W (1/10W-S) 1.60±0.10 0.80±0.10 0.45±0.10 0.30±0.20 0.30±0.20 LE05 1/10W (1/8W-S) 2.00±0.15 1.25 -0.10 +0.15 0.55±0.10 0.40±0.20 0.40±0.20 LE06 1/8W (1/4W-S) 3.10±0.15 1.55 -0.10 +0.15 0.55±0.10 0.45±0.20 0.45±0.20 类型 功率 (70ºC) LE03 Resistance Range 阻值范围 0.5%, 1%, 5% 1Ω~10M 0Ω 1Ω~10M 0Ω 1Ω~10M 0Ω Performance Specification (性能) Temperature coefficient Short-time overload Terminal bending Solderability 温度系数 短时间过负荷 端子弯曲 可焊性 1Ω~10Ω: ≤±400ppm / ºC 11Ω~100Ω: ≤±200ppm / ºC >100Ω: ≤±100ppm / ºC ±5%, ±2%: ±(2.0%+0.1Ω)Max. ( 最大 ) ±1%, ±0.5%: ±(1.0%+0.1Ω)Max. ( 最大 ) ±(1.0%+0.05Ω)Max. ( 最大 ) Min. 95% Coverage ( 最少 95% 覆盖率 ) Soldering heat 耐焊接热 ±(1.0%+0.05Ω) Max. ( 最大 ) Humidity (Steady State) 恒定湿热 ±5%, ±2%: ±(3.0%+0.1Ω)Max. ( 最大 ) ±1%, ±0.5%: ±(0.5%+0.1Ω)Max. ( 最大 ) Dielectric withstanding voltage 绝缘耐压 No evidence of flashover, mechanical damage, arcing or insulation breakdown 无击穿 , 飞弧及可见机械性损伤 Temperature Cycling 温度循环 ±5%, ±2%: ±(1.0%+0.05Ω)Max. ( 最大 ) ±1%, ±0.5%: ±(0.5%+0.05Ω)Max. ( 最大 ) Load life 负载寿命 ±5%, ±2%: ±(3.0%+0.1Ω)Max. ( 最大 ) ±1%, ±0.5%: ±(1.0%+0.1Ω)Max. ( 最大 ) 1 Flex LED Strip use Thick Film Chip Resistors - LE RoHS Compliant 软灯条专用电阻器 - LE系列 UniOhm Ordering Procedure (Example: LE06 1/4W-S 5% 1.2 Ω T/R-5000) 订购方式 (例如: LE06 1/4W-S 5% 1.2 Ω T/R-5000) L E 0 6 Product Type ( 产品类型 ): Fill-in 4 digits with the Chip resistor type as follow ( 填四位数表示产品类型 )： LE03, LE05, LE06 S 4 J 0 1 2 J T 5 E Wattage ( 功率 ): Fill-in 2 digits with the codes as follow ( 用下列代码填二位数 ): WA=1/10W, W8=1/8W S4=1/4W-S, WG=1/16W S8=1/8W-S Tolerance ( 公差 ): D = ±0.5% F = ±1% J = ±5% Resistance Value (阻值): 5% (E-24 series) : the 1st digit is “0”, the 2nd & 3rd digits are for the significant figures of the resistance and the 4th indicate the numbers of zeros following 5% 产品 (E-24 系列阻值 ): 第 1 位数是 0， 第 2、3 位数表示阻值的有效数，第 4 位表示有几个 0); ≤1%( E-96 series): the 1st to 3rd digits are for the significant figures of the resistance and the 4th indicate the numbers of zeros following 1% 产品 (E96 系列阻值 ): 第 1-3 位数表 示阻值的有效数，第 4 位数表示有几 个 0). Packing Qty. ( 包装数量 ) 5=5,000pcs Special Feature ( 特征 ): E = Lead Free (standard) ( 无铅标准品 ) Packing Type (包装类型): T = T/R ( 编带 / 卷带 ) 2