MS122WF100LT4E

厚聲國際貿易(昆山)有限公司深圳分公司 Uniroyal Electronics Global Co.,Ltd Shenzhen Branch Specification for Approval Customer : Part Name : MS Product Name: Metal Strip Current Sensing Chip Resistors Part No. : SERIES MS****J****T*E、MS****F****T*E Building 8, Jiuwei Industrial Zone, Xixiang Town, Bao'An District ,Shenzhen, Guangdong, China TEL: 0755-61861797 FAX: 0755-27484308 Approved Checked Prepared File NO. Edition Date Page William Zhao Ted Hsu Chengxia Tang JLC-01-016 1 2017/07/03 1 / 10 厚聲國際貿易(昆山)有限公司深圳分公司 Uniroyal Electronics Global Co.,Ltd Shenzhen Branch Content Index 1.0 Scope .............................................................................................................................................. 4 3.0 Power Rating.................................................................................................................................. 5 5.0 Structure ........................................................................................................................................ 5 2.0 4.0 6.0 7.0 8.0 9.0 10.0 11.0 Ratings & dimension ..................................................................................................................... 4 Voltage rating ................................................................................................................................. 5 Marking .......................................................................................................................................... 5 Performance specification ............................................................................................................ 6 Part No. System .............................................................................................................................. 7 Ordering Procedure ....................................................................................................................... 7 Packaging ....................................................................................................................................... 8 Note .............................................................................................................................................. 10 Approved Checked Prepared File NO. Edition Date Page William Zhao Ted Hsu Chengxia Tang JLC-01-016 1 2017/07/03 2 / 10 厚聲國際貿易(昆山)有限公司深圳分公司 Uniroyal Electronics Global Co.,Ltd Shenzhen Branch File Name: MS SERIES Edition Date 2017/07/03 Edition No. 1 Page Date Amended by Checked by Amendment Record Description Signature Approved Checked Prepared File NO. Edition Date Page William Zhao Ted Hsu Chengxia Tang JLC-01-016 1 2017/07/03 3 / 10 厚聲國際貿易(昆山)有限公司深圳分公司 Uniroyal Electronics Global Co.,Ltd Shenzhen Branch 1.0 Scope: This file is specification of Metal Strip Current Sensing Chip Resistors manufactured by UNIOHM. 2.0 Ratings & dimension: Dimension(mm) Type Power 70℃ MS05 1/2W 2.00±0.30 1.20±0.30 0.60±0.20 MS07 1.5W 3.10±0.20 2.50±0.25 0.70±0.20 MS10 1.5W 5.00±0.20 2.50±0.25 MS12 3W MS06 MS11 MS28 MS17 MS20 MS27 1W 2W 3W 2W 4W 3W L 3.10±0.20 4.40±0.20 6.35±0.20 6.35±0.20 6.35±0.20 6.70±0.20 7.10±0.20 5W 11.00±0.30 5W 11.60±0.30 3W 3W 11.00±0.30 11.60±0.30 W 1.60±0.30 3.20±0.25 3.20±0.25 3.20±0.25 3.20±0.25 7.20±0.25 4.20±0.20 5.00±0.25 5.00±0.25 6.70±0.25 6.70±0.25 H 0.70±0.20 0.70±0.20 0.70±0.20 1.00±0.20 0.70±0.20 0.70±0.20 0.70±0.20 0.70±0.20 0.65±0.20 0.65±0.20 0.60±0.20 0.60±0.20 Dimension (mm) A1/A2 ≤1.0 B1/B2 0.50~1.00±0.25 ≤1.0 0.80~1.50±0.30 ≤1.0 1.80~2.50±0.30 ≤1.0 ≤1.0 ≤1.0 1.0%&5% 0.50±0.25 ≤1.0 ≤1.0 Resistance Range 5~30mΩ 3~51mΩ 0.65±0.25 3~150mΩ 0.70~1.40±0.30 2~150mΩ 1.20~1.90±0.30 2~100mΩ 1~2mΩ 3~100mΩ 1.20~1.90±0.30 101~250mΩ ≤1.0 1.10~1.50±0.30 3~150mΩ ≤1.0 2.50±0.30 2~9mΩ 21~50mΩ 2.50±0.30 2~9mΩ 31~100mΩ ≤1.0 ≤1.0 ≤1.0 ≤1.0 0.80±0.30 2.50±0.30 2.50±0.30 5~100mΩ 10~20mΩ 10~30mΩ Approved Checked Prepared File NO. Edition Date Page William Zhao Ted Hsu Chengxia Tang JLC-01-016 1 2017/07/03 4 / 10 厚聲國際貿易(昆山)有限公司深圳分公司 Uniroyal Electronics Global Co.,Ltd Shenzhen Branch 3.0 Power Rating: Resistor shall have a power rating based on continuous load operation at ambient temperature from -55℃ to 155℃. 4.0 Voltage rating: Resistor shall have one voltage specifications at direct-current (DC) continuous voltage or approximate single-wave root-mean-square (RMS) alternating-current (AC) continuous working voltage. We can calculate the Voltage from the following formula: RCWV = √𝑃𝑃 × 𝑅𝑅 Remark: RCWV: Rate Continuous Working Voltage. (Volt) P: Power Rating (Watt.) R: Nominal Resistance (Ohm) 5.0 Structure: 1 2 6.0 Marking: 3 Marking Alumina Substrate Terminal (Cu/Ni/ Sn) 4 5 Resistance layer Protective layer First code should be “R” which meaning as decimal point. R010→10mΩ Approved Checked Prepared File NO. Edition Date Page William Zhao Ted Hsu Chengxia Tang JLC-01-016 1 2017/07/03 5 / 10 厚聲國際貿易(昆山)有限公司深圳分公司 Uniroyal Electronics Global Co.,Ltd Shenzhen Branch 7.0 Performance specification: Item MS05 MS06 Temperature Coefficient Item Short-time overload Low Temperature Storage High Temperature Exposure Solderability Resistance rate of change after soldering heat Load life Temperature cycling Load life in humidity MS07 MS11 MS10 MS12 MS28 MS17 MS20 MS27 Limits 5~30mΩ：±150ppm/℃ 3~25mΩ：±100ppm/℃ 26~51 mΩ：±50ppm/℃ ±30ppm/℃ ±30ppm/℃ 2~10mΩ：±50ppm/℃ 11~150mΩ：±30ppm/℃ 2W 101-250mΩ：±30ppm/℃ 3W 3-100mΩ：±30ppm/℃ 3W 1~2 mΩ: ±50ppm/℃ ±50ppm/℃ ±30ppm/℃ ±30ppm/℃ ±30ppm/℃ Limits Resistance change rate must be in 1%: ±(1%+0.001Ω) 5%:±(2%+0.001Ω) and no mechanical damage. ±(1.0%+0.001Ω)△R ±(1.0%+0.001Ω)△R Test Method (JIS-C-5201&5202) Resistance value will change when temperature changes per centigrade. 𝑅𝑅2 − 𝑅𝑅1 𝑅𝑅1 （𝑇𝑇1 − 𝑇𝑇2 ） × 106 (𝑃𝑃𝑃𝑃𝑃𝑃/℃) R1: Resistance value at room temp. (t1) R2:Resistance value at room temp.+100℃ (t2) Test condition: 1st condition: room temp. (t1), 2nd condition: room temp. +100℃(t2) Test Method (JIS-C-5201&5202) Permanent resistance change after the application of a potential of 5 times rated power for 5 seconds. - 55 ℃ for 1000hrs 155℃ for 1000hrs More than 95% coverage rate ±(0.5%+0.005Ω)△R 1%:± (1%+0.001Ω)△R 5%:± (3%+0.001Ω)△R Without mechanical damage ± (0.5%+0.005Ω)△R 1%:± (1.0%+0.001Ω)△R 5%:± (3.0%+0.001Ω)△R The surface of solder must be new, smooth, clean, shiny and continuous, and without concentrated pinholes. The solder’s temperature must be within 245±3℃.Hold in hot solder 2~3seconds. Dipped into solder at 260℃for 10 seconds. Permanent resistance change after 1,000 hours operating at rated power at 70±2℃, 1.5hrs ON ,0.5hrs OFF. -55℃to+155℃, 5cycles,30min at each extreme test cycle 40±2℃,1000hrs at rated power,90~95%RH , 1.5hrs ON,0.5hrs OFF. Approved Checked Prepared File NO. Edition Date Page William Zhao Ted Hsu Chengxia Tang JLC-01-016 1 2017/07/03 6 / 10 厚聲國際貿易(昆山)有限公司深圳分公司 Uniroyal Electronics Global Co.,Ltd Shenzhen Branch 8.0 Part No. System: Part No. System has 14 codes. 1st ~4th codes: Product name. E.g.:MS05, MS06, MS07,MS10, MS11,MS12, MS17, MS20, MS27 8.1 5th ~6th codes: Power rating. 8.2 E.g.: W=Normal Size; “1”~“G”to denotes“1”~“16”as Hexadecimal:1W~16W (≧1W ) Wattage code Wattage 8.3 8.4 code 1 2 1W 3 2W 1/2 3W 1/3 W2 5 5W 1/4 W3 7 7W 1/5 W4 8 8W 1/7 W5 W7 7th code: Resistors’ tolerance. E.g.: F=±1% 8th ~ 11th codes: Resistance value. 9 10 9W 1/8 AW 1/9 W8 1/10 W9 J=±5% WA 15 FW 1/15 WF 8.4.1 If the value belongs to E-96 series, 8th~10th digits means the significant figures of the resistance and the 11th digit are the power of ten. 8.4.2 We use the power of ten in 11th digit. 8.5 8.6 0=100 1=101 2=102 3=103 4=104 5=105 6=106 J=10-1 K=10-2 L=10-3 M=10-4 12th code: Packaging Type. E.g.: T: Tape/Reel 13th code: Standard Packing Quantity. E.g.: 1=1,000PCS 2=2,000PCS 3=3,000PCS 4=4,000 PCS 5=5,000PCS 14th code: Special features information. E.g.: E=For “Environmental Protection, Lead Free type” 9.0 Ordering Procedure:( Example: MS12 2W ±1% 0.15Ω T/R-4000) M S Product Type: MS05 MS06 MS10 MS12 MS17 MS20 MS27 1 2 2 W Wattage: W2=1/2W 1W=1W WJ=1.5W 2W=2W 3W=3W 5W=5W F Tolerance: F=±1% J=±5% 1 5 Resistance Value: 0 L T E-24 series: The 1st digit is“0”;the2nd & 3rd digits are for the significant figures of the resistance and the 4th digit indicate the numbers of zeros following. E-96 series value (1%): The 1st to 3rd digits are for the significant figures OF the resistance and 4th digit denotes number of zeros following. J=10-1; K=10-2; L=10-3 M=10-4 N=10-5 4 Packing quantity: A=500 PCS 1=1,000 PCS 2=2,000 PCS 3=3,000 PCS 4=4,000PCS 5=5,000PCS Packing Type: T=Tape/Reel E Special Feature: E= Lead-Free Approved Checked Prepared File NO. Edition Date Page William Zhao Ted Hsu Chengxia Tang JLC-01-016 1 2017/07/03 7 / 10 厚聲國際貿易(昆山)有限公司深圳分公司 Uniroyal Electronics Global Co.,Ltd Shenzhen Branch 10.0 Packaging: 10.1 Tapping dimension: TYPE A ± 0.2 B ± 0.2 C ± 0.05 MS06 2.00 3.60 2.00 MS05 MS07 2.00 2.80 3.6 3.50 2.00 1.50 2.00 1.50 TYPE A ± 0.2 B ± 0.2 C ± 0.05 MS11 3.50 4.80 2.00 MS10 MS12 TYPE MS17 2.80 3.50 W±0.3 16.0 5.40 6.70 A0±0.1 4.50 φD+0.1 E± 0.1 1.75 1.50 φD+0.1 T±0.10 3.50 8.00 0.81 3.50 1.75 φD1+0.25 1.50 1.50 2.00 1.50 1.50 1.50 7.40 W ± 0.2 1.75 2.00 B0±0.1 F ± 0.05 P±0.1 8.00 G±0.1 0.81 8.00 4.00 4.00 0.75 4.00 E ± 0.1 F ± 0.05 W ± 0.2 T±0.10 1.75 5.50 12.00 1.00 1.75 F±0.1 7.50 3.50 1.75 1.50 8.00 Unit: mm E±0.1 1.75 5.50 5.50 D0+0.1 1.5 12.00 0.75 12.00 P0±0.1 4.0 1.00 P2±0.1 2.0 Unit: mm G±0.1 4.00 4.00 4.00 Unit: mm T±0.05 0.30 Approved Checked Prepared File NO. Edition Date Page William Zhao Ted Hsu Chengxia Tang JLC-01-016 1 2017/07/03 8 / 10 厚聲國際貿易(昆山)有限公司深圳分公司 Uniroyal Electronics Global Co.,Ltd Shenzhen Branch TYPE W±0.3 A0±0.1 B0±0.1 P±0.1 F±0.1 E±0.1 D0±0.1 P0±0.1 P2±0.1 T±0.05 TYPE W±0.5 A0±0.2 B0±0.2 P±0.2 F±0.3 E±0.2 D0±0.2 P0±0.2 P2±0.3 T±0.2 MS20 MS27 24.0 24.0 5.40 7.2 10.2 Reel dimension: TYPE 11.5 11.9 TAPING 8.0 12.0 5,000pcs 2.0 13.0 21.0 60.0 5,000pcs MS12 Emboss Plastic Tape Emboss Plastic Tape 4.0 ΦD±1 Emboss Plastic Tape MS11 1.5 C±0.5 MS07 Emboss Plastic Tape 1.75 4.0 B±0.5 5,000pcs MS10 11.5 1.5 A±0.5 Emboss Plastic Tape Emboss Plastic Tape 1.75 Qty/Reel MS05 MS06 11.5 4,000pcs 4,000pcs 4,000pcs 2.0 2.0 2.0 2.0 2.0 13.0 13.0 13.0 13.0 13.0 21.0 21.0 21.0 21.0 21.0 2.0 2.0 ΦL±2 W±1 178.0 10.0 178.0 60.0 178.0 60.0 60.0 1.3 UNIT: mm 60.0 60.0 0.3 178.0 178.0 178.0 10.0 10.0 13.8 13.8 13.8 Approved Checked Prepared File NO. Edition Date Page William Zhao Ted Hsu Chengxia Tang JLC-01-016 1 2017/07/03 9 / 10 厚聲國際貿易(昆山)有限公司深圳分公司 Uniroyal Electronics Global Co.,Ltd Shenzhen Branch TYPE TAPING MS17 Embossed TYPE TAPING Qty/Reel 1,000pcs B±2.0 Qty/Reel A±0.5 B±1.5 1,000pcs MS27 Embossed 1,000pcs 25.4 24.5 C±0.5 178.0 A±1.0 Embossed TAPING 17.0 B±1.0 Qty/Reel MS20 TYPE A±0.5 60.2 C±1.0 330.0 100.0 330.0 100.0 C±1.5 UNIT: mm 𝐃𝐃+𝟎𝟎.𝟑𝟑 −𝟎𝟎.𝟐𝟐 13.2 UNIT: mm D±0.2 13.0 D±0.5 13.0 11.0 Note: 11.1 UNIOHM recommends the storage condition as below: 11.1.1 Temperature: 15℃~35℃. 11.1.2 Humidity: 25%~75%. Even under recommended condition, products’ solderability will degrade day by day. 11.2 Please hold the cartons in correct direction signed on cartons’ side during storage and delivery. 11.3 Resistor performance and solderability will fail if stored in the following condition: 11.3.1 High electrostatic environment. 11.3.2 Direct sunlight, rain, snow and so on. 11.3.3 In sea wind or corrosive gases long time, including Cl2, H2S, NH3, SO2, and NO2. Approved Checked Prepared File NO. Edition Date Page William Zhao Ted Hsu Chengxia Tang JLC-01-016 1 2017/07/03 10 / 10