NQ03WAF3740T5E

DATA SHEET Product Name Anti-Sulfurized Automotive Thick Film Chip Resistors Part Name NQ Series File No. SMD-SP-021 Uniroyal Electronics Global Co., Ltd. 88#, Longteng Road, Economic & Technical Development Zone, Kunshan, Jiangsu, China Tel Email Manufacture Plant +86 512 5763 1411 / 22 /33 marketing@uni-royal.cn Uniroyal Electronics Industry Co., Ltd. Aeon Technology Corporation Royal Electronic Factory (Thailand) Co., Ltd. Royal Technology (Thailand) Co., Ltd. Anti-Sulfurized Automotive Thick Film Chip Resistors 1. Scope 1.1 This datasheet is the characteristics of Anti-Sulfurized Automotive Thick Film Chip Resistors manufactured by UNI-ROYAL. 1.2Exellent Anti-Sulfurized 1.3 AEC-Q200 qualifed 1.4 Suitable for reflow & wave soldering 1.5 RoHS complaint 2. Part No. System 3. 4. Part No. includes 14 codes shown as below: 2.1 1st~4th codes: Part name. E.g.: NQ01,NQ02,NQ03,NQ05,NQ06,NQ07,NQ10,NQ12. 2.2 5th~6th codes: Power rating. E.g.: W=Normal Size “1~G” = “1~16” 5. . Wattage 3/4 1/2 1/4 1/8 1/10 1/16 1/20 1 Normal Size 07 W2 W4 W8 WA WG WM 1W If power rating is equal or lower than 1 watt, 5th code would be “W” and 6th code would be a number or letter. E.g.: WA=1/10W W4=1/4W 2.3 7th code: Tolerance. E.g.: D=±0.5% F=±1% G=±2% J=±5% K= ±10% 2.4 8th~11th codes: Resistance Value. 2.4.1 If value belongs to standard value of E-24 series, the 8th code is zero, 9th~10th codes are the significant figures of resistance value, and the 11th code is the power of ten. 2.4.2 If value belongs to standard value of E-96 series, the 8th~10th codes are the significant figures of resistance value, and the 11th code is the power of ten. 2.4.311th codes listed as following: 0=100 1=101 2=102 3=103 4=104 5=105 6=106 J=10-1 K=10-2 L=10-3 M=10-4 th th 2.5 12 ~14 codes. 2.5.1 12th code: Packaging Type. E.g.: C=Bulk T=Tape/Reel 2.5.2 13th code: Standard Packing Quantity. 4=4,000pcs 5=5,000pcs C=10,000pcs D=20,000pcs E=15,000pcs Chip Product: BD=B/B-20000pcs TC=T/R-10000pcs 2.5.3 14th code: Special features. E = Environmental Protection, Lead Free, or Standard type. 3. Ordering Procedure (Example: NQ05 1/8W ±5% 10KΩ T/R-5000) N Q 0 5 Product Type: Fill-in 4 digits with the chip resistor type as follows: NQ01 NQ02 NQ03 NQ05 NQ06 NQ07 NQ10 NQ12 W 8 Wattage: Normal size: WG=1/16W WA=1/10W W8=1/8W W4=1/4W W2=1/2W 07=3/4W 1W=1W J 0 1 0 3 Resistance Value: 5% (E-24 series): 1st code is zero, 2nd~3rd codes are the significant figures of resistance value, and the rest code is the power of ten. 1% (E-96 series): 1st~3rd codes are the significant figures of resistance value and the rest code is the power of ten. J=10-1; K=10-2; L=10-3 T 5 E Packing quantity: NQ01: E=15000PCS NQ02: C=10000PCS NQ03,NQ05,NQ06, NQ07: 5=5000PCS NQ10,NQ12: 4=4000PCS Special Feature: Tolerance: F=±1% J=±5% E= Lead-Free Packing Type: T=Tape/Reel Sep.10,2022 V.7 www. uni-royal.cn Page 2/9 Anti-Sulfurized Automotive Thick Film Chip Resistors 4. Marking 4.1 For NQ01, NQ02 size. Due to the very small size of the resistor’s body, there is no marking on the body. 4.2 Normally, the marking of 0Ω NQ03, 0Ω NQ05, 0Ω NQ06, 0Ω NQ07, 0Ω NQ10, 0Ω NQ12 resistors as following 0→0 4.3±5% tolerance products (E-24 series): 3 codes. 1st~2nd codes are the significant figures of resistance value, and the rest code is the power of ten. 333 → 33KΩ 4.4 ±1% tolerance products (E-96 series): 4 codes. 1st~3rd codes are the significant figures of resistance value, and the rest code is the power of ten. Letter "R" in mark means decimal point. 2701 → 2.7KΩ 4.5 Standard E-96 series values of 0603 ≤1% : due to the small size of the resistor’s body, 3 digits marking will be used to indicate the accurate resistance value by using the following multiplier & resistance code. Multiplier Code (for 0603 ≤±1% marking) Code A B C D E F G H X Y Z Multiplier 100 101 102 103 104 105 106 107 10-1 10-2 10-3 Standard E-96 series Resistance Value code (for 0603≤±1% marking) Value Code Value Code Value Code Value Code 100 102 01 02 178 182 25 26 316 324 49 50 562 576 73 74 105 107 03 04 187 191 27 28 332 340 51 52 590 604 75 76 110 113 05 06 196 200 29 30 348 357 53 54 619 634 77 78 115 118 07 08 205 210 31 32 365 374 55 56 649 665 79 80 121 124 09 10 215 221 33 34 383 392 57 58 681 698 81 82 127 130 11 12 226 232 35 36 402 412 59 60 715 732 83 84 133 137 13 14 237 243 37 38 422 432 61 62 750 768 85 86 140 143 15 16 249 255 39 40 442 453 63 64 787 806 87 88 147 150 17 18 261 267 41 42 464 475 65 66 825 845 89 90 154 158 19 20 274 280 43 44 487 499 67 68 866 887 91 92 162 165 21 22 287 294 45 46 511 523 69 70 909 931 93 94 169 174 23 24 301 309 47 48 536 549 71 72 953 976 95 96 Sep.10,2022 V.7 www. uni-royal.cn Page 3/9 Anti-Sulfurized Automotive Thick Film Chip Resistors So the resistance value are marked as the following examples 1.96KΩ=196×101Ω=29B 12.4Ω=124×10-1Ω=10X 4.6 Standard E-24 and not belong to E-96 series values (≤±1%) of 0603 size: the marking is the same as 5% tolerance but marking as underline. 333=33KΩ 680=68Ω 5. Dimension Dimension(mm) Type L W H A B NQ01(0201) 0.60±0.03 0.30±0.03 0.23±0.03 0.12±0.05 0.15±0.05 NQ02(0402) 1.00±0.10 0.50±0.05 0.35±0.05 0.20±0.10 0.25±0.10 NQ03(0603) 1.60±0.10 0.80±0.10 0.45±0.10 0.30±0.20 0.30±0.20 NQ05(0805) 2.00±0.15 1.25+0.15/-0.10 0.55±0.10 0.40±0.20 0.40±0.20 NQ06(1206) 3.10±0.15 1.55+0.15/-0.10 0.55±0.10 0.45±0.20 0.45±0.20 NQ07(1210) 3.10±0.10 2.60±0.20 0.55±0.10 0.50±0.25 0.50±0.20 NQ10(2010) 5.00±0.10 2.50±0.20 0.55±0.10 0.60±0.25 0.50±0.20 NQ12(2512) 6.35±0.10 3.20±0.20 0.55±0.10 0.60±0.25 0.50±0.20 6. Resistance Range Resistance Range Type Power Rating 1% 5% NQ01 1/20W 1Ω-10MΩ 1Ω-10MΩ NQ02 1/16W 1Ω-10MΩ 1Ω-10MΩ NQ03 1/10W 1Ω-10MΩ 1Ω-10MΩ NQ05 1/8W 1Ω-10MΩ 1Ω-10MΩ NQ06 1/4W 1Ω-10MΩ 1Ω-10MΩ NQ07 1/2W 1Ω-10MΩ 1Ω-10MΩ NQ10 3/4W 1Ω-10MΩ 1Ω-10MΩ NQ12 1W 1Ω-10MΩ 1Ω-10MΩ 7. Ratings Type Max. Working Voltage Max. Overload Voltage Dielectric withstanding Voltage Resistance Value of Jumper Rated Current of Jumper Max. Overload Current of Jumper Operating Temperature NQ01 25V 50V /