NS05W8F8401T5E

DATA SHEET Product Name High Quality Anti-Sulfurized Automotive Thick Film Chip Resistors Part Name NS Series File No. SMD-SP -022 Uniroyal Electronics Global Co., Ltd. 88#, Longteng Road, Economic & Technical Development Zone, Kunshan, Jiangsu, China Tel Email Manufacture Plant +86 512 5763 1411 / 22 /33 marketing@uni-royal.cn Uniroyal Electronics Industry Co., Ltd. Aeon Technology Corporation Royal Electronic Factory (Thailand) Co., Ltd. Royal Technology (Thailand) Co., Ltd. High Quality Anti-Sulfurized Automotive Thick Film Chip Resistors 1. Scope 1.1 This datasheet is the characteristics of High Quality Anti-Sulfurized Automotive Thick Film Chip Resistors manufactured by UNI-ROYAL. 1.2 Superior Anti-Sulfurized 1.3 Superior Anti-Surge Voltage performance 1.4 Suitable for reflow & wave soldering 1.5 Application automobile industry, comply with the relevant provisions of AEC-Q200,NS01:36% power rating under +125℃; NS02~NS12 100% power rating under +125℃ 1.6 AEC-Q200 qualified 1.7 RoHS compliant 2. Part No. System Part No. includes 14 codes shown as below: 2.1 1st~4th codes: Part name. E.g.: NS01,NS02,NS03,NS05,NS06,NS07,NS10,NS12 2.2 5th~6th codes: Power rating. E.g.: W=Normal Size “1~G” = “1~16” Wattage 3/4 1/3 1/4 1/8 1/10 1/16 1/20 1 Normal Size 07 W3 W4 W8 WA WG WM 1W If power rating is equal or lower than 1 watt, 5th code would be “W” and 6th code would be a number or letter. E.g.: WA=1/10W W4=1/4W 2.3 7th code: Tolerance. E.g.: D=±0.5% F=±1% G=±2% J=±5% K= ±10% 2.4 8th~11th codes: Resistance Value. 2.4.1 If value belongs to standard value of E-24 series, the 8th code is zero, 9th~10th codes are the significant figures of resistance value, and the 11th code is the power of ten. 2.4.2 If value belongs to standard value of E-96 series, the 8th~10th codes are the significant figures of resistance value, and the 11th code is the power of ten. 2.4.311th codes listed as following: 0=100 1=101 2=102 3=103 4=104 5=105 6=106 J=10-1 K=10-2 L=10-3 M=10-4 th th 2.5 12 ~14 codes. 2.5.1 12th code: Packaging Type. E.g.: C=Bulk T=Tape/Reel 2.5.2 13th code: Standard Packing Quantity. 4=4,000pcs 5=5,000pcs C=10,000pcs D=20,000pcs E=15,000pcs Chip Product: BD=B/B-20000pcs TC=T/R-10000pcs 2.5.3 14th code: Special features. E = Environmental Protection, Lead Free, or Standard type. 3. Ordering Procedure (Example: NS05 1/8W ±5% 1.2Ω T/R-5000 ) N S 0 5 Product Type: Fill-in 4 digits with the chip resistor type as follows: NS01 NS02 NS03 NS05 NS06 NS07 NS10 NS12 W 8 Wattage: Normal size: WM=1/20W WG=1/16W WA=1/10W W8=1/8W W5=1/5W W4=1/4W W3=1/3W W2=1/2W 07=3/4W 1W=1W 2W=2W J 0 1 J T Resistance Value: 5% (E-24 series): 1st code is zero, 2nd~3rd codes are the significant figures of resistance value, and the rest code is the power of ten. 1% (E-96 series): 1st~3rd codes are the significant figures of resistance value and the rest code is the power of ten. J=10-1; K=10-2; L=10-3 Tolerance: F=±1% J=±5% Sep.10,2022 V.7 2 www. uni-royal.cn 5 E Packing quantity: NS01 E=15000PCS NS02: C=10000PCS NS03,NS05,NS06, NS07: 5=5000PCS NS10,NS12: 4=4000PCS Packing Type: T=Tape/Reel Special Feature E= Lead-Free Page 2/9 High Quality Anti-Sulfurized Automotive Thick Film Chip Resistors 4. Marking: 4.1 For NS01, NS02 size. Due to the very small size of the resistor’s body, there is no marking on the body. 4.2 Normally, the marking of 0 NS03, 0 NS05, 0 NS06, 0 NS07, 0 NS10, 0 NS12 resistors as following 00 4.3±5% tolerance products (E-24 series): 3 codes. 1st~2nd codes are the significant figures of resistance value, and the rest code is the power of ten. 333  33K 4.4 1% tolerance products (E-96 series): 4 codes. 1st~3rd codes are the significant figures of resistance value, and the rest code is the power of ten. Letter "R" in mark means decimal point. 2701  2.7K 4.5 Standard E-96 series values of 0603 ≤1% : due to the small size of the resistor’s body, 3 digits marking will be used to indicate the accurate resistance value by using the following multiplier & resistance code. Multiplier Code (for 0603 ≤±1% marking) Code A B C D E F G H X Y Z Multiplier 100 101 102 103 104 105 106 107 10-1 10-2 10-3 Standard E-96 series Resistance Value code (for 0603≤±1% marking) Value 100 Code 01 Value 178 Code 25 Value 316 Code 49 Value 562 Code 73 102 105 02 03 182 187 26 27 324 332 50 51 576 590 74 75 107 110 04 05 191 196 28 29 340 348 52 53 604 619 76 77 113 115 06 07 200 205 30 31 357 365 54 55 634 649 78 79 118 121 08 09 210 215 32 33 374 383 56 57 665 681 80 81 124 127 10 11 221 226 34 35 392 402 58 59 698 715 82 83 130 133 12 13 232 237 36 37 412 422 60 61 732 750 84 85 137 140 14 15 243 249 38 39 432 442 62 63 768 787 86 87 143 147 16 17 255 261 40 41 453 464 64 65 806 825 88 89 150 154 18 19 267 274 42 43 475 487 66 67 845 866 90 91 158 162 20 21 280 287 44 45 499 511 68 69 887 909 92 93 165 169 22 23 294 301 46 47 523 536 70 71 931 953 94 95 174 24 309 48 549 72 976 96 Sep.10,2022 V.7 www. uni-royal.cn Page 3/9 High Quality Anti-Sulfurized Automotive Thick Film Chip Resistors So the resistance value are marked as the following examples 1.96K=196101=29B 12.4=12410-1=10X 4.6 Standard E-24 and not belong to E-96 series values (≤±1%) of 0603 size: the marking is the same as 5% tolerance but marking as underline. 333=33K 680=68 5. Dimension Type Dimension(mm) L W A B NS01(0201) 0.60±0.03 0.30±0.03 0.23±0.03 H 0.12±0.05 0.15±0.05 NS02(0402) 1.00±0.10 0.50±0.05 0.35±0.05 0.20±0.10 0.25±0.10 NS03(0603) 1.60±0.10 0.80±0.10 0.45±0.10 0.30±0.20 0.30±0.20 NS05(0805) 2.00±0.15 1.25+0.15/-0.10 0.55±0.10 0.40±0.20 0.40±0.20 NS06(1206) 3.10±0.15 1.55+0.15/-0.10 0.55±0.10 0.45±0.20 0.45±0.20 NS07(1210) 3.10±0.10 2.60±0.20 0.55±0.10 0.50±0.25 0.50±0.20 NS10(2010) 5.00±0.10 2.50±0.20 0.55±0.10 0.60±0.25 0.50±0.20 NS12(2512) 6.35±0.10 3.20±0.20 0.55±0.10 0.60±0.25 0.50±0.20 6. Resistance Range Type NS01 NS02 NS03 NS05 NS06 NS07 NS10 NS12 Power Rating （Pt） t= 70℃ t=125℃ 1/20W / 1/10W 1/16W 1/5W 1/10W 1/3W 1/8W 1/2W 1/4W 3/4W 1/3W 1W 3/4W 2W 1W Resistance Range 1.0% 1Ω-10MΩ 1Ω-10MΩ 1Ω-10MΩ 1Ω-10MΩ 1Ω-10MΩ 1Ω-10MΩ 1Ω-10MΩ 1Ω-10MΩ 5.0% 1Ω-10MΩ 1Ω-10MΩ 1Ω-10MΩ 1Ω-10MΩ 1Ω-10MΩ 1Ω-10MΩ 1Ω-10MΩ 1Ω-10MΩ 7. Ratings Type Max. Working Voltage Max. Overload Voltage Dielectric withstanding Voltage Resistance Value of Jumper Rated Current of Jumper NS01 NS02 NS03 NS05 NS06 NS07 NS10 NS12 25V 50V 75V 150V 200V 200V 200V 200V 50V 100V 150V 300V 400V 500V 500V 500V / 100V 300V 500V 500V 500V 500V 500V