MVL-5P4TUOL

T-1 3/4 ( φ5mm)PACKAGE HIGH POWET AllnGaP LED Lamps Description Package Dimensions φ5.05 (.200) MVL-5P4TUOL Unit : mm ( inches ) The MVL-5P4TUOL , utilizes the latest transparent substrate Aluminum Indium Gallium Phosphide (AllnGaP) LED technology. This LED material has outstanding light output efficiency over a wide range of drive current. The package is T-1 3/4 (φ5mm) water clear standard type. SEE NOTE 2 5.47 (.215) 7.62 (.300) 5.90 (.230) 1.00 (.040) Features l 0.50 TYP. (.020) 25.40 MIN (1.000) Ultra - brightness Low power consumption TTL compatible Reliable A 2.54 (.100) 1.00MIN. (.040) l l SEE NOTE 3 l C Notes : 1. Tolerance is ± 0.25 mm (.010") unless otherwise noted. 2. Protruded resin under flange is 1.5 mm (.059") max. 3. Lead spacing is measured where the leads emerge from the package. Absolute Maximum Ratings @ TA=25oC Parameter Power Dissipation Peak Forward Current (1/10 Duty Cycle 100µs pulse width ) Continuous Forward Current Reverse Voltage Operating Temperature Range Storage Temperature Range Lead Soldering Temperature 1.6 mm from body for 5 seconds at 260oC Symbol Pad Ipf Iaf VR Topr Tstg Maximum Rating 125 100 50 5 -40 C to +100 C -40oC to +100oC o o Unit mW mA mA V Unity Opto Technology Co., Ltd. 01/02/2002 MVL-5P4TUOL Optical-Electrical Characteristics Parameter Radiometric Intensity Luminous Intensity Forward Voltage Reverse Current Peak Wavelength Dominant Wavelength Spectral Line Half Width Viewing Angle Relative Luminous Intensity @ TA=25oC Symbol Ie Iv VF IR λpeak λd ∆λ 2θ1/2 Min . 8.5 1500 Typ . 2.3 639 630 23 30 Max . 43.9 2.8 100 Unit . mW/sr mcd V µA nm nm nm deg. IF=20mA IF=20mA IF=20mA VR=5V IF=20mA IF=20mA IF=20mA IF=20mA Test Conditions Typical Optical-Electrical Characteristic Curves 1 0.5 0 550 575 600 625 650 675 700 Wavelength (nm) FIG.1 SPECTRAL DISTRIBUTION Forward Current IF (mA) Forward Current IF (mA) 50 40 30 20 10 0 1.2 1.6 2.0 2.4 2.8 3.2 60 50 40 30 20 10 0 0 20 40 60 80 100 o Forward Voltage VF (V) FIG.2 FORWARD CURRENT VS. FORWARD VOLTAGE Relative Luminous Intensity 5.0 4.0 3.0 2.0 1.0 0.0 0 20 40 60 80 100 Ambient Temperature TA ( C) FIG.3 FORWARD CURRENT VS. AMBIENT TEMPERATURE 0° 10° 20° 30o 40o 1.0 0.9 0.8 0.5 0.3 0.1 0.2 0.4 0.6 50o 60o 70o 80o 90o Forward Current IF (mA) FIG.4 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT Relative Luminous Intensity FIG.5 RADIATION DIAGRAM 01/02/2002 MVL-5P4TUOL Radiometric Intensity Bin Limits (mW/sr at 20mA) Bin Min. Max. K L M N P Q R S T 8.5 10.2 12.3 14.7 17.7 21.2 25.4 30.5 36.6 10.2 12.3 14.7 17.7 21.2 25.4 30.5 36.6 43.9 4. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 3. Iv classification code is marked on each packing bag. 2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. Note: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. Note: Tolerance for each bin will be ± 15% Unity Opto Technology Co., Ltd. 01/02/2002