MVL-663UOLK-S

ELLIPSE (4.7 X 5.7) High Performance AllnGaP LED Lamps Description The MVL-663UOLK-S , utilizes the latest absorbing substrate Aluminum Indium Gallium Phosphide (AllnGaP) LED technology. This LED material has outstanding light output efficiency over a wide range of drive current. The package is ellipse transparent red color plastic type. φ4.70 (.191) MVL-663UOLK-S Package Dimensions Unit: mm ( inches ) 4.7 (.191) 7.70 (.312) 5.7 (.231) Applications l l l l l SEE NOTE 2 3.70 (.150) 1.5 0 (.060) 0.50 TYP. (.020) 25.40 MIN. (1.000) Full color displays & moving message signs Solid state incandescent replacement bulbs High ambient panel indicators Color printers & scanners Medical & Analytical instruments Features l l l l l 1.00MIN. (.040) 2.54TYP. (.100) A SEE NOTE C Ultra - brightness Low power consumption TTL compatible Reliable Stopper Notes : 1. Tolerance is ± 0.25 mm (.010") unless otherwise noted. 2. Protruded resin under flange is 1.5 mm (.059") max. 3. Lead spacing is measured where the leads emerge from the package. Absolute Maximum Ratings @ TA=25oC Parameter Power Dissipation Peak Forward Current(1/10 Duty Cycle100µs pulse width) Continuous Forward Current Reverse Voltage Operating Temperature Range Storage Temperature Range Symbol Pad Ipf Iaf VR Topr Tstg Maximum Rating 110 100 50 5 -40 Cto +100 C -40oC to +100oC o o Unit mW mA mA V Lead Soldering Temperature 1.6 mm from body for 5 seconds at 260oC Unity Opto Technology Co., Ltd. 12/16/2000 MVL-663UOLK-S Optical-Electrical Characteristics @ TA=25oC Parameter Luminous Intensity Forward Voltage Reverse Current Peak /Dominant Wavelength Spectral Line Half Width Viewing Angle Test Conditions IF=20mA IF=20mA VR=5V IF=20mA IF=20mA IF=20mA Symbol IV VF IR λp/λd ∆λ 2θ1/2 Min . Typ . 850 2.0 630/625 18 35/65 Max . 2.4 100 Unit . mcd V µA nm nm deg. Typical Optical-Electrical Characteristic Curves Relative Luminous Intensity 1 0.5 0 550 575 600 625 650 675 700 Wavelength (nm) FIG.1 SPECTRAL DISTRIBUTION Forward Current IF (mA) Forward Current IF (mA) 1.2 1.6 2.0 2.4 2.8 50 40 30 20 10 0 60 50 40 30 20 10 0 0 30 60 90 120 Forward Voltage VF (V) FIG.2 FORWARD CURRENT VS. FORWARD VOLTAGE Relative Luminous Intensity Relative Luminous Intensity 5.0 4.0 3.0 2.0 1.0 0.0 0 20 40 60 80 100 Ambient Temperature TA (oC) FIG.3FORWARD CURRENT VS. AMBIENT TEMPERATURE 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 1.0 0.9 0.8 Forward Current IF (mA) FIG.4 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT FIG.5 RADIATION DIAGRAM Unity Opto Technology Co., Ltd. 12/16/2000