MVL-663UYLK-S

ELLIPSE (4.7 X 5.7) High Performance AllnGaP LED Lamps Description The MVL-663UYLK-S, utilizes the latest absorbing substrate Aluminum Indium Gallium Phosphide (AllnGaP) LED technology. This LED material has outstanding light output efficiency over a wide range of drive current. The package is oval transparent yellow color plastic type. SEE NOTE 2 3.70 (.150) 1.5 0 (.060) φ4.70 (.191) MVL-663UYLK-S Package Dimensions Unit: mm ( inches ) 4.7 (.191) 7.70 (.312) 5.7 (.231) Features l 0.50 TYP. (.020) 25.40 MIN. (1.000) Ultra - Brightness Low Power Consumption TTL Compatible Coating A 2.54TYP. (.100) SEE NOTE 3 C 1.00MIN. (.040) l l l Notes : 1. Tolerance is ± 0.25 mm (.010") unless otherwise noted. 2. Protruded resin under flange is 1.5 mm (.059") max. 3. Lead spacing is measured where the leads emerge from the package. Absolute Maximum Ratings @ TA=25oC Parameter Power Dissipation Peak Forward Current(1/10 Duty Cycle 100µs pulse width) Continuous Forward Current Reverse Voltage Operating Temperature Range Storage Temperature Range Symbol Pad Ipf Iaf VR Topr Tstg Maximum Rating 125 100 50 5 -40 C to +100 C -40oC to +100oC o o Unit mW mA mA V Lead Soldering Temperature 1.6 mm from body for 5 seconds at 260oC Unity Opto Technology Co., Ltd. 12/16/2000 MVL-663UYLK-S Optical-Electrical Characteristics @ TA=25oC Parameter Luminous Intensity Forward Voltage Reverse Current Peak/DominantWavelength Spectral Radiation Bandwidth Viewing Angle Test Conditions IF=20mA IF=20mA VR=5V IF=20mA IF=20mA IF=20mA Symbol IV VF IR λp/λd ∆λ 2θ1/2 Min. Typ . 600 2.1 592/590 20 35/65 Max. 2.5 100 Unit mcd V µA nm nm deg. Typical Optical-Electrical Characteristic Curves Relative Luminous Intensity 1 0.5 0 500 550 600 650 700 Wavelength (nm) Fig.1 SPECTRAL DISTRIBUTION Forward Current IF (mA) Forward Current IF (mA) 50 40 30 20 10 0 1.2 1.6 2.0 2.4 2.8 3.2 60 50 40 30 20 10 0 0 20 40 60 80 o 100 Forward Voltage VF (V) Fig.2 FORWARD CURRENT VS. FORWARD VOLTAGE Relative Luminous Intensity 5.0 4.0 3.0 2.0 1.0 0.0 0 20 40 60 80 100 Ambient Temperature TA ( C) Fig.3 FORWARD CURRENT VS. AMBIENT TEMPERATURE Relative Luminous Intensity 0° 10° 20° 30o 40o 1.0 0.9 0.8 0.5 0.3 0.1 0.2 0.4 0.6 50o 60o 70o 80o 90o Forward Current IF (mA) Fig.4 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT Fig.5 RADIATION DIAGRAM Unity Opto Technology Co., Ltd. 12/16/2000