MVL-711YN

Unity Opto Technology Co., Ltd. MVL-711GN MVL-711YN MVL-711HRN 04/30/2002 Description The MVL-711xxN series package is 2X5 rectangular led lamps standard color diffused plastic lens. The Hi-EFF red (HR) and yellow LED chips are made with Gallium Arsenide Phosphide on Gallium Phosphide diode. The green LED chip is made with Gallium Phosphide on Gallium Phosphide diode. The red (DR) chip is made with Aluminum Gallium Arsenide on Gallium Arsenide diode. The red (UR) chip is made with Aluminum Gallium Arsenide on Aluminum Gallium Arsenide diode. Package Dimensions Unite: mm ( inches ) Applications l l l l I.C. compatible / Low current requirement Improved-brightness Reliable and rugged New sturdy leads NOTES : 1. Tolerance is ± 0.25 mm (.010") unless otherwise noted. 2. Protruded resin under flange is 1.5 mm (.059'') max. 3. Lead spacing is measured where the leads emerge from the package. Absolute Maximum Tatings Parameter Power Dissipation Peak Forward Current (1/10 Duty Cycle 0.1ms pulse width) Continuous Forward Current Derating Linear From 25 C Reverse Voltage Operating Temperature Range Storage Temperature Range o Symbol Pad Ipf Iaf VR Topr Tstg o Maximum Rating GREEN YELLOW HR Unit mW A mA/ C mA V o 100 120 30 0.4 5 60 80 20 0.25 5 o 100 120 30 0.4 5 o -55 C to + 100 C -55oC to + 100oC Lead Soldering Temperature (1.6mm from body) for 3 seconds at 260 C P1 Optical -Electrical Characteristics Part No. : MVL-711GN Parameter Luminous Intensity Forward Voltage Reverse Current Wavelength Spectral Line Half Width Viewing Angle Part No. : MVL-711YN Parameter Luminous Intensity Forward Voltage Reverse Current Wavelength Spectral Line Half Width Viewing Angle Part No. : MVL-711HRN Parameter Luminous Intensity Forward Voltage Reverse Current Wavelength Spectral Line Half Width Viewing Angle @TA=25oC Unit . mcd V µA nm nm deg o @TA=25 C Unit . mcd V µA nm nm deg Test Conditions IF=10mA IF=20mA VR=5V IF=20mA IF=20mA IF=20mA Symbol IV VF IR λp ∆λ 2θ1/2 Min . 1.2 - Typ . 3.9 2.1 565 30 140 Max . 2.8 100 - Test Conditions IF=10mA IF=20mA VR=5V IF=20mA IF=20mA IF=20mA Symbol IV VF IR λp ∆λ 2θ1/2 Min . 0.8 - Typ . 2.9 2.1 585 35 140 Max . 2.8 100 - Test Conditions IF=10mA IF=20mA VR=5V IF=20mA IF=20mA IF=20mA Symbol IV VF IR λp ∆λ 2θ1/2 Min . 1.2 - Typ . 3.8 2.0 640 40 140 Max . 2.8 100 - @TA=25oC Unit . mcd V µA nm nm deg P2 Typical Optical-Electrical Characteristic Curves 1 GY HR 50 HR Y G Relative Luminous Intensity Forward Current IF(mA) 500 550 600 650 700 750 40 30 20 10 0 0.8 1.2 1.6 2.0 2.4 2.8 0.5 0 Wavelength (nm) Fig 1. RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH Forward Voltage (V) Fig 2. FORWARD CURRENT VS. FORWARD VOLTAGE 50 40 30 20 10 0 0 20 40 60 80 o 5.0 Relative Luminous Intensity 100 Forward Current IF (mA) 4.0 3.0 2.0 1.0 0.0 0 10 20 30 40 50 G/HR Y Ambient Temperature ( C) Fig 3. FORWARD CURRENT VS. AMBIENT TEMPERATURE Forward Current IF (mA) Fig 4. RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT Relative Luminous Intensity Relative Luminous Intensity 10 0o 10o 20o 30o 40o 1 1.0 0.9 0.8 0.5 0.3 0.1 0.2 0.4 0.6 50o 60o 70o 80o 90o 0.1 -30 -20 -10 0 10 20 30 40 50 60 70 Ambient Temperature (oC) Fig 5. RELATIVE LUMINOUS INTENSITY VS. AMBIENT TEMPERATURE Fig 6. RADIATION DIAGRAM P3