2SB1424-X-AB3-R

UNISONIC TECHNOLOGIES CO., LTD 2SB1424 LOW VCE(SAT) DESCRIPTION As the UTC PNP silicon transistor, the 2SB1424 is the epitaxial planar type transistor which has very low VCE(SAT) (Collector-emitter saturation voltage). Preliminary PNP SILICON TRANSISTOR TRANSISTOR FEATURES * Very good DC current gain * Very low VCE(SAT)=-0.2V@ IC/IB=(-2A)/(-0.1A) Lead-free: 2SB1424L Halogen-free: 2SB1424G ORDERING INFORMATION Normal 2SB1424-x-AB3-R Ordering Number Lead Free 2SB1424L-x-AB3-R Halogen Free 2SB1424G-x-AB3-R Package SOT-89 Pin Assignment 1 2 3 B C E Packing Tape Reel www.unisonic.com.tw Copyright © 2008 Unisonic Technologies Co., Ltd 1 of 2 QW-R208-044,a 2SB1424 PARAMETER Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current Preliminary PNP SILICON TRANSISTOR ABSOLUTE MAXIMUM RATING (Ta=25°C) SYMBOL VCBO VCEO VEBO DC Pulse(Note 2) IC RATINGS -20 -20 -6 UNIT V V V -3 A -5 Collector Dissipation PC 0.5 W Junction Temperature TJ 150 ℃ Storage Temperature TSTG -55 ~ +150 ℃ Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Note: 1 .Absolute maximum ratings are stress ratings only and functional device operation is not implied. Note: 2. Pulse test: Pulse Width=10ms ELECTRICAL CHARACTERISTICS (Ta=25°C, unless otherwise specified) PARAMETER SYMBOL BVCBO Collector-Base Breakdown Voltage BVCEO Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage BVEBO ICBO Collector Cutoff Current Emitter Cutoff Current IEBO ON CHARACTERISTICS DC Current Gain hFE Collector-Emitter Saturation Voltage VCE(SAT) SMALL-SIGNAL CHARACTERISTICS Current Gain Bandwidth Product fT Output Capacitance Cob TEST CONDITIONS IC=-50μA , IE=0 IC=-1mA , IB=0 IE=-50μA, IC=0 VCB=-20V VEB=-5V VCE=-2V, IC=-0.1A IC/IB =(-2A)/(-0.1A) VCE=-2V, IE=0.5A, f=100MHz VCB=-10V, IE=0, f=1MHz MIN -20 -20 -6 TYP MAX UNIT V V V μA μA -0.1 -0.1 120 390 -0.5 240 35 V MHz pF CLASSIFICATION OF hFE1 RANK RANGE Q 120-270 R 180-390 UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 2 QW-R208-044,a