0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
3510L-D08-T

3510L-D08-T

  • 厂商:

    UTC(友顺)

  • 封装:

  • 描述:

    3510L-D08-T - PC POWER SUPPLY SUPERVISORS - Unisonic Technologies

  • 详情介绍
  • 数据手册
  • 价格&库存
3510L-D08-T 数据手册
UNISONIC TECHNOLOGIES CO., LTD 3510 PC POWER SUPPLY SUPERVISORS DESCRIPTION The UTC 3510 is designed to provide protection circuits, power good output (PGO) indicator, fault protection output (FPO) and a PSON control for PC switching power supply systems. The protection circuits include over voltage protection (OVP) monitoring for 3.3V, 5V and 12V (12V via VDD pin) and under voltage protection(UVP) monitoring for 3.3V and 5V. When an OV or UV event arose and is detected, the power good output (PGO) goes low and the FPO will be set to high. The protection latch can be reset by setting PSON to high. UVP function is enabled 75ms after PSON is set low and de-bounced. Besides, there is a 2.3ms delay with 38ms de-bounce at turn off but no delay during turn on. When OVP and UVP detected the right voltage level, a PGO signal will be issued. SOP-8 CMOS IC D IP - 8 *Pb - free plating product number: 3510L FEATURES * Over Voltage Protection and Lock Out for 3V, 5V and 12V. * Under Voltage Protection and Lock Out for 3.3V and 5V. * Open Drain Output for PGO and FPO pin. * 300ms delay for PGO. * 75ms delay for 3.3V and 5V short-circuit turn-on protection. * 2.3ms PSON control to FPO turn-off delay. * 38ms PSON control de-bounce. * 73us width noise deglitches. * Wide supply voltage range from 4V ~15V. ORDERING INFORMATION Order Number Normal Lead Free Plating 3510-D08-T 3510L-D08-T 3510-S08-R 3510L-S08-R 3510-S08-T 3510L-S08-T 3 5 1 0 L - D 0 8 -T (1)Packing Type (2)Package Type (3)Lead Plating (1) R: Tape Reel, T: Tube (2) D08: DIP-8, S08: SOP-8 (3) L: Lead Free Plating Blank: Pb/Sn , Package DIP-8 SOP-8 SOP-8 Packing Tube Tape Reel Tube www.unisonic.com.tw Copyright © 2005 Unisonic Technologies Co., Ltd 1 of 9 QW-R502-048,B 3510 PIN CONFIGURATION CMOS IC PGI GND FPO PSON 1 2 3 4 8 7 6 5 PGO VDD VS5 VS33 PIN DESCRIPTION PIN No. 1 2 3 4 5 6 7 8 PIN NAME PGI GND FPO PSON VS33 VS5 VDD PGO TYPE I O I I I I O DESCRIPTION Power good input Ground Fault protection output(invert), open drain output stage ON/OFF control 3.3V over/under-voltage protection 5V over/under-voltage protection Supply voltage/12V over-voltage protection input pin Power good output, open drain output stage UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 9 QW-R502-048,B 3510 BLOCK DIAGRAM VDD 12V OV + POR CMOS IC VS5 R 5 V OV + 73μ s Debounce S Q FPO VS33 73μ s Debounce 3.3 V OV + 3. 3 V UV + 5V UV + + PGI 1 2.3ms Delay VDD 38ms Debounce PSON 75ms Delay VDD PGO 150μ s Debounce PGI 2 + 150 s Debounce μ and 4.8ms Delay 300ms Delay Band - Gap Reference 1.2 V PGI Band - Gap Reference 0.95V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 9 QW-R502-048,B 3510 ABSOLUTE MAXIMUM RATINGS PARAMETER Supply Voltage SYMBOL VDD CMOS IC RATINGS UNIT 16 V FPO 16 Output Voltage VOUT V PGO 8 All Other Pins -0.3 ~ 16 V DIP-8 1092 Power Dissipation (Ta ≤25°C) PD mWV SOP-8 730 ℃ Operating Temperature TOPR -20 ~ +85 ℃ Storage Temperature TSTG -40 ~ +150 Note: 1. Absolute maximum ratings are stress ratings only and functional device operation is not implied. The device could be damaged beyond Absolute maximum ratings. 2. The device is guaranteed to meet performance specifications within 0℃~+70℃ operating temperature range and assured by design from -20℃~+85℃. RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage Input Voltage Output Voltage Output Sink Current PSON, VS5, VS33 PGI FPO PGO FPO PGO SYMBOL VDD VIN VOUT IO(SINK) 1 MIN 4 TYP MAX 15 7 7 15 7 20 10 UNIT V V V mA ms VDD+0.3V Supply Voltage Rising Time (See Note) Note: VDD rising and falling slew rate must be less than 14V/ms. ELECTRICAL CHARACTERISTICS (Ta=25°C ,unless otherwise specified.) PARAMETER OVER-VOLTAGE PROTECTION Over Voltage Threshold Low-level Output Voltage (FPO) Leakage Current (FPO) Noise Deglitch Time OVP PGI AND PGO Input threshold Voltage Under Voltage Threshold Low-level Output Voltage (PGO) Leakage Current (PGO) Short-Circuit Protection Delay Transient Delay time PGI VS33 VS5 SYMBOL VS33 VS5 VDD VOL ILEAK TEST CONDITIONS MIN 3.7 5.7 13.2 VDD =5V, IO(SINK) =20mA V(FPO) =5V VDD =5V TYP 3.9 6.1 13.8 MAX 4.1 6.5 14.4 0.7 5 110 1.2 1 2.4 3.7 0.4 5 114 450 7.2 225 445 220 UNIT V V µA µS 35 1.1 0.9 2 3.3 73 1.15 0.95 2.2 3.5 VPGI VPG2 VIT VOL ILEAK VDD =4V, IO(SINK) =10 mA PGO = 5 V V V V µA ms ms 3.3V, 5V PGI to PGO PGI to FPO PGI to PGO PGI to FPO UVP to FPO tDLY1 VDD = 5 V Noise Deglitch Time VDD = 5 V 49 200 3.2 88 180 82 75 300 4.8 150 296 146 µs UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 9 QW-R502-048,B 3510 ELECTRICAL CHARACTERISTICS(Cont.) PARAMETER PSON CONTROL Input Voltage High-level Low-level VIH VIL IIN tB tDLY2 IDD 2.4 SYMBOL TEST CONDITIONS MIN TYP CMOS IC MAX UNIT V V µA ms ms mA 1.2 PSON = 0 V VDD = 5 V VDD = 5 V PSON =5V 120 24 38 tB+1.1 tB+2.3 57 tB+4 1 Input Pullup Current Debounce Time (PSON) Transient Delay Time (PSON to FPO) TOTAL DEVICE Supply Current UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 9 QW-R502-048,B 3510 TIMING DIAGRAM CMOS IC VDD PSON FPO PGI 3.3V,5V 12V PGO tDLY1 tB tDLY 1 t DLY2 Protect Occur PSON On PSON On AC Off tDLY 1 PG OFF Delay PSON Off UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 9 QW-R502-048,B 3510 TYPICAL APPLICATION 5 VSB PGI PGO 12V 1 2 3 PSON (From Motherboard) 4 8 7 6 5 0.5 V Drop VSB 5V 3.3V CMOS IC PGI GND FPO PSON PGO VDD VS5 VS33 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 7 of 9 QW-R502-048,B 3510 TYPICAL CHARACTERISTICS SUPPLY CURRENT vs SUPPLY VOLTAGE 400 Supply Current, IDD (μA) CMOS IC INPUT CURRENT (PSON) vs INPUT VOLTAGE (PSON) 20 0 Input Current, IIN (μA) VDD=4V 300 200 100 0 -100 -200 -300 0 2.5 5 7.5 10 12.5 15 Supply Voltage VDD (V) , PGI=1.4V PSON=5V Ta = -20°C Ta = 2 5°C T a = 8 5°C -20 -40 -60 -80 -100 -120 -140 0 1 2 3 4 5 6 7 Input Voltage, VIN (V) Ta = -20°C Ta = 2 5°C Ta = 8 5°C LOW-LEVEL OUTPUT VOLTAGE (FPO) vs LOW-LEVEL OUTPUT CURRENT (FPO) 4 Low-Level Output Voltage, VOL (V) Low-Level Output Voltage, VOL (mV) LOW-LEVEL OUTPUT VOLTAGE (FPO) vs LOW-LEVEL OUTPUT CURRENT (FPO) 800 VDD=4V 700 PSON=GND Exploded View 600 500 400 300 200 100 0 0 5 10 T a = 85°C Ta = 25°C Ta = -20°C 15 20 25 VDD=4V PSON=GND 3 2 1 Ta = 85°C Ta = 25°C Ta = -20°C 0 20 40 60 80 100 0 Low-Level Output Current, IOL (mA) Low-Level Output Current, IOL (mA) LOW-LEVEL OUTPUT VOLTAGE (PGO) vs LOW-LEVEL OUTPUT CURRENT (PGO) 4 VDD=4V PSON=GND 600 LOW-LEVEL OUTPUT VOLTAGE (PGO) vs LOW-LEVEL OUTPUT CURRENT (PGO) VDD=4V PSON=GND Exploded View Low-Level Output Voltage, VOL (mV) Low-Level Output Voltage, VOL (V) 500 400 300 200 100 0 3 2 1 Ta = 85°C Ta = 25°C T a = -20°C 0 25 50 75 100 125 150 Ta = 85°C Ta = 25°C Ta = -20°C 0 5 10 15 20 0 Low-Level Output Current, IOL (mA) Low-Level Output Current, IOL (mA) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 8 of 9 QW-R502-048,B 3510 CMOS IC UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 9 of 9 QW-R502-048,B
3510L-D08-T
物料型号: - 正常镀铅型号:3510-D08-T、3510-S08-R、3510-S08-T - 无铅镀铅型号:3510L-D08-T、3510L-S08-R、3510L-S08-T

器件简介: UTC 3510是一款用于个人电脑开关电源系统的电源监控IC,提供保护电路、电源好输出(PGO)指示、故障保护输出(FPO)和一个PSON控制。保护电路包括过压保护(OVP)监测3.3V、5V和12V(12V通过VDD引脚)以及欠压保护(UVP)监测3.3V和5V。

引脚分配: - PGI(1):电源好输入 - GND(2):地 - FPO(3):故障保护输出(反转),开漏输出阶段 - PSON(4):开关控制 - Vs33(5):3.3V过/欠压保护 - Vs5(6):5V过/欠压保护 - VDD(7):供电电压/12V过压保护输入引脚 - PGO(8):电源好输出,开漏输出阶段

参数特性: - 过压保护和锁定3V、5V和12V。 - 欠压保护和锁定3.3V和5V。 - PGO和FPO引脚的开漏输出。 - PGO 300ms延迟。 - 3.3V和5V短路开机保护75ms延迟。 - PSON控制到FPO关闭的2.3ms延迟。 - PSON控制38ms消抖。 - 73us宽度噪声消抖。

功能详解: UTC 3510在检测到过压或欠压事件时,PGO输出会变低,FPO会变高。通过将PSON设置为高电平可以重置保护锁存。UVP功能在PSON设置为低电平后75ms启用并消抖。在关闭时有2.3ms的延迟和38ms的消抖,但在开机时没有延迟。当OVP和UVP检测到正确的电压水平时,会发出PGO信号。

应用信息: UTC 3510适用于个人电脑开关电源系统,提供过压和欠压保护,以及电源好和故障保护输出。

封装信息: - DIP-8封装:3510-D08-T和3510L-D08-T - SOP-8封装:3510-S08-R、3510-S08-T、3510L-S08-R和3510L-S08-T
3510L-D08-T 价格&库存

很抱歉,暂时无法提供与“3510L-D08-T”相匹配的价格&库存,您可以联系我们找货

免费人工找货