UNISONIC TECHNOLOGIES CO., LTD 75232
MULTIPLE RS-232 DRIVERS AND RECEIVERS
DESCRIPTION
The UTC 75232 is a monolithic IC containing three independent drivers and five receivers which comply with the requirements of the TIA/EIA232-F standards.
LINEAR INTEGRATED CIRCUIT
FEATURES
* Single chip with easy interconnection of the UART and serial-port connector of personal computer. * Meets standard TIA/EIA-232-F and ITU V.28 * Up to 120 kbps data rate * 20-pin SOP/ DIP/SSOP/TSSOP packages Lead-free: 75232L Halogen-free: 75232G
ORDERING INFORMATION
Normal 75232-D20-T 75232-P20-R 75232-P20-T 75232-R20-R 75232-R20-T 75232-S20-R 75232-S20-T Ordering Number Lead Free 75232L-D20-T 75232L-P20-R 75232L-P20-T 75232L-R20-R 75232L-R20-T 75232L-S20-R 75232L-S20-T Halogen Free 75232G-D20-T 75232G-P20-R 75232G-P20-T 75232G-R20-R 75232G-R20-T 75232G-S20-R 75232G-S20-T Package DIP-20 TSSOP-20 TSSOP-20 SSOP-20 SSOP-20 SOP-20 SOP-20 Packing Tube Tape Reel Tube Tape Reel Tube Tape Reel Tube
www.unisonic.com.tw Copyright © 2008 Unisonic Technologies Co., Ltd
1 of 10 QW-R113-005,E
75232
PIN CONFIGURATION
VDD RA1 RA2 RA3 DY1 DY2 RA4 DY3 RA5 VSS
1 2 3 4 5 6 7 8 9 10
LINEAR INTEGRATED CIRCUIT
20 19 18 17 16 15 14 13 12 11
VCC RY1 RY2 RY3 DA1 DA2 RY4 DA3 RY5 GND
PIN DESCRIPTION
PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 PIN NAME VDD RA1 RA2 RA3 DY1 DY2 RA4 DY3 RA5 VSS GND RY5 DA3 RY4 DA2 DA1 RY3 RY2 RY1 VCC FUNCTION Supply voltage First receiver input Second receiver input Third receiver input First driver output Second driver output Fourth receiver input Third driver output Fifth receiver input Supply voltage Ground Fifth receiver output Third driver input Fourth receiver output Second driver input First driver input Third receiver output Second receiver output First receiver output Supply voltage
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 10 QW-R113-005,E
75232
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL VDD VSS VCC
LINEAR INTEGRATED CIRCUIT
RATINGS UNIT 15 V Supply Voltage (Note 2) -15 V 10 V Driver -15 ~ 7 V Input Voltage Range VIN Receiver -30 ~ 30 V Driver Output Voltage Range VOUT -15 ~ 15 V Receiver Low Level Output Current IOUT 20 mA Operation Temperature TOPR 0 ~ +70 °C Storage Temperature TSTG -40 ~ +150 °C Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Note: 1. Absolute maximum ratings are stress ratings only and functional device operation is not implied. Note: 2. All voltages are with respect to the network ground terminal.
THERMAL DATA
PARAMETER DIP-20 Junction-to-Ambient SOP-20 SSOP-20 TSSOP-20 θJA SYMBOL RATINGS 70 100 115 115 UNIT °C/W
RECOMMENDED OPERATING RATINGS
PARAMETER Supply Voltage Level Input Voltage (driver only) High Level Output Current Low Level Output Current High Low Driver Receiver Driver Receiver SYMBOL VDD VSS VCC VIH VIL IOH IOL MIN 7.5 -7.5 4.5 1.9 TYP 9 -9 5 MAX 15 -15 5.5 0.8 -6.0 -0.5 6 16 UNIT V V V V V mA mA
E LECTRICAL CHARACTERISTICS
(Over recommended supply voltage and operating temperature ranges, unless otherwise specified) PARAMETER SUPPLY CURRENTS SYMBOL TEST CONDITIONS VDD =9V, VSS =-9V No load. VDD =12, VSS =-12V All inputs at 1.9V VDD =15, VSS =-15V VDD =9V, VSS =-9V No load. VDD =12, VSS =-12V All inputs at 0.8V VDD =15, VSS =-15V VDD =9V, VSS =-9V No load. VDD =12, VSS =-12V All inputs at 1.9V VDD =15, VSS =-15V VDD =9V, VSS =-9V No load. VDD =12, VSS =-12V All inputs at 0.8V VDD =15, VSS =-15V No load. All inputs at 5V, VCC=5V MIN TYP MAX UNIT 15 19 25 4.5 5.5 9 -15 -19 -25 -3.2 -3.2 -3.2 30 mA
Supply Current from VDD
IDD
mA
mA
Supply Current from VSS
ISS
mA mA
Supply Current from VCC
ICC
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 10 QW-R113-005,E
75232
ELECTRICAL CHARACTERISTICS(Cont.)
LINEAR INTEGRATED CIRCUIT
PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT DRIVER SECTION (VDD=9V, VSS=-9V, VCC=5V) Output Voltage Level High VOH VIL=0.8V, RL=3 kΩ 6 7.5 V (Figure. 1) Low VOL VIH=1.9V, RL=3 kΩ (Note 1) -7.5 -6 V Input Current Level High IIH VIN=5V 10 μA (Figure. 2) Low IIL VIN=0V -1.6 mA Short Circuit Output High IOH(SC) VIL=0.8V, VOUT=0V (Note 2) -8.5 -12 -19.5 mA Current (Figure. 1) Low IOL(SC) VIH=2.0V, VOUT=0V 8.5 12 19.5 mA Output Resistance (Note 3) ROUT VDD=VSS=VCC=0V, VOUT=-2V~2V 300 Ω RECEIVER SECTION (VDD=9V, VSS=-9V, VCC=5V) Ta=25°C (Figure. 5) 1.75 1.9 2.3 Positive VT+ V Going Threshold Voltage Ta=0°C ~ 70°C (Figure. 5) 1.55 2.3 Negative VT0.75 0.97 1.25 V Input Hysteresis(VT+ - VT-) VHYS 0.5 V VIH=0.75V 2.6 4 5 High VOH IOH=-0.5mA V Output Voltage Level Inputs Open 2.6 Low VOL VIN=3V, IOL=10mA 0.2 0.45 V VIN=25V 3.6 8.3 mA High IIH Input Current Level 0.43 VIN=3V (Figure. 5) VIN=-25V -3.6 -8.3 Low IIL mA -0.43 VIN=-3V Short-Circuit Output Current IO(SC) (Fig. 4) -3.4 -12 mA Note. 1. For voltage logic levels, the more positive (less negative) limit is designated as maximum, (e.g. if -10V is a maximum, the typical value is a more negative voltage). 2: Output short circuit conditions must maintain the total power dissipation below absolute maximum ratings and the sign is used to indicate direction. 3: Test conditions are those specified by TIA/EIA232-F and as listed above.
SWITCHING CHARACTERISTICS (Ta=25°C)
PARAMETER SYMBOL TEST CONDITIONS DRIVER SECTION (VDD=12V, VSS=-12V, VCC=5V) tPLH RL=3 ~ 7 kΩ, CL=15pF Propagation Delay Time (Figure. 3) tPHL MIN TYP 315 75 60 40 1.7 1.5 MAX UNIT 500 175 100 75 2.5 2.5 ns ns ns ns μs μs
tTLH RL=3 ~ 7 kΩ, CL=15pF tTHL Transition Time RL=3 ~ 7 kΩ, CL=2500pF tTLH (Figure. 3, Note) tTHL RECEIVER SECTION (VDD=12V, VSS=-12V, VCC=5V) tPLH 107 250 ns RL=5 kΩ, CL=50pF tPHL 42 150 ns Propagation Delay Time (Figure. 6) tPLH 100 160 ns RL=1.5 kΩ, CL=15pF 60 100 ns tPHL tTLH 175 350 ns RL=5 kΩ, CL=50pF 16 60 ns tTHL Transition Time (Figure. 6) tTLH 90 175 ns RL=1.5 kΩ, CL=15pF tTHL 15 50 ns Note: Measured points of the output waveform (TIA/EIA-232-F conditions) as below, all unused inputs are tied. - Low to High level: between -3V and 3V. - High to Low level: between 3V and -3V.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 10 QW-R113-005,E
75232
PARAMETER MEASUREMENT INFORMATION DRIVER TEST CIRCUITS:
LINEAR INTEGRATED CIRCUIT
IIH VIN -IIL VIN
VDD VCC
Figure. 1 For VOH, VOL, IOH(SC), IOL(SC)
VSS Figure. 2 For IIH, IIL
DRIVER VOLTAGE WAVEFORMS:
Figure. 3
Note: 1. The pulse generator characteristics: tW=25μs, PRR=20kHz, ZO=50Ω, tR=tF