78RXXL-TB5-T

UNISONIC TECHNOLOGIES CO., LTD 78RXX LOW DROPOUT VOLTAGE REGULATOR 1 LINEAR INTEGRATED CIRCUIT DESCRIPTION As the UTC linear integrated LDO, the UTC 78RXX shows a high current, high accuracy, and specially low-dropout voltage. The features are: maximum 500mV dropout voltage, very low ground current. Cause the series have been designed for high current loads, so they are also used in lower current, extremely low dropout-critical systems (in which their tiny dropout voltage and ground current values are important attributes). TO-220B 1 TO-220F-4 FEATURES * IOUT=1A ; VOUT=3.3V,5V,9V,12V (typ) * With ADJ version * Internal overcurrent protection, internal thermal shutdown * Internal overvoltage protection, internal short-circuit protection * Output disable function 1 TO-252-5 ORDERING INFORMATION Ordering Number Lead Free Halogen Free 78RXXL-TB5-T 78RXXG-TB5-T 78RXXL-TF4-T 78RXXG-TF4-T 78RXXL-TN5-R 78RXXG-TN5-R Note: xx: output voltage, refer to Marking Information Package TO-220B TO-220F-4 TO-252-5 Packing Tube Tube Tape Reel www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., Ltd 1 of 12 QW-R102-035.E 78RXX MARKING INFORMATION PACKAGE VOLTAGE CODE 33: 05: 09: 12: 33: 05: 09: 12: 00: 3.3V 5.0V 9.0V 12V 3.3V 5.0V 9.0V 12V ADJ LINEAR INTEGRATED CIRCUIT MARKING TO-220F-4 TO-220B/ TO-252-5 PIN DESCRIPTIONS PIN NO. 1 2 3 4 5 PIN NAME VIN VOUT GND VDIS ADJ PIN FUNCTION Input voltage pin Output voltage pin GND Disable signal input pin Adjustable input pin ( FOR TO-220B/TO-252-5 ) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 12 QW-R102-035.E 78RXX BLOCK DIAGRAM Fixed Output Voltage Versions LINEAR INTEGRATED CIRCUIT Overvoltage Protection VIN 1 Bandgap Reference + Thermal Shutdown SOA Protection R1 Q1 2 VOUT Short-Circuit Protection High/Low R2 + Output ON/OFF 1.4V 3 GND 4 VDIS UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 12 QW-R102-035.E 78RXX BLOCK DIAGRAM Adjustable Output Voltage Versions LINEAR INTEGRATED CIRCUIT Overvoltage Protection VIN 1 Bandgap Reference + Thermal Shutdown SOA Protection Q1 2 VOUT Short-Circuit Protection High/Low + Output ON/OFF 1.4V 3 GND 5 ADJ 4 VDIS UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 12 QW-R102-035.E 78RXX PARAMETER Input Voltage Disable Voltage Output Current SYMBOL VIN VDIS IOUT LINEAR INTEGRATED CIRCUIT ABSOLUTE MAXIMUM RATINGS (Operating temperature range applies unless otherwise specified. ) RATINGS UNITS 35 V 35 V 1.0 A TO-220B/TO-220F-4 1.5 W Power Dissipation PD TO-252-5 1 W Junction Temperature TJ +150 °C Operating Temperature TOPR -40 ~ +85 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER TO-220B/TO-220F-4 Junction to Ambient TO-252-5 TO-220B/TO-220F-4 Junction to Case TO-252-5 SYMBOL θJA θJC RATING 62.5 110 4 12 UNIT °C/W °C/W °C/W °C/W ELECTRICAL CHARACTERISTICS (IOUT =0.5A, TA = 25°C,unless otherwise specified) For 78R33 (VIN=5V) PARAMETER Output Voltage Dropout Voltage Load Regulation Line Regulation Quiescent Current Ripple Rejection Disable Voltage Disable Bias Current For 78R05 (VIN=7V) PARAMETER Output Voltage Dropout Voltage Load Regulation Line Regulation Quiescent Current Ripple Rejection Disable Voltage Disable Bias Current High Low High Low High Low High Low SYMBOL VOUT VD ΔVOUT ΔVOUT IQ RR VDISH VDISL IDISH IDISL SYMBOL VOUT VD ΔVOUT ΔVOUT IQ RR VDISH VDISL IDISH IDISL CONDITIONS VIN = 5V IOUT = 1A 5mA < IOUT < 1A 4V < VIN < 10V IOUT = 0 A (Note) Output Active Output Disabled VDIS = 2.7V VDIS = 0.4V CONDITIONS VIN = 7V IOUT = 1A 5mA < IOUT < 1A 6V < VIN < 12V IOUT = 0 A (Note) Output Active Output Disabled VDIS = 2.7V VDIS = 0.4V MIN 3.22 TYP 3.3 0.1 0.5 45 2.0 55 MAX UNITS 3.38 V 0.5 V 2.0 ％ 2.5 ％ 10 mA dB V 0.8 V 0.02 mA -0.4 mA MAX UNITS 5.12 V 0.5 V 2.0 ％ 2.5 % 10 mA dB V 0.8 V 0.02 mA -0.4 mA MIN 4.88 TYP 5 0.1 0.5 45 2.0 55 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 12 QW-R102-035.E 78RXX ELECTRICAL CHARACTERISTICS(Cont.) For 78R09 (VIN=11V) PARAMETER Output Voltage Dropout Voltage Load Regulation Line Regulation Quiescent Current Ripple Rejection Disable Voltage Disable Bias Current For 78R12 (VIN=14V) PARAMETER Output Voltage Dropout Voltage Load Regulation Line Regulation Quiescent Current Ripple Rejection Disable Voltage Disable Bias Current For 78R00-ADJ PARAMETER Output Voltage Dropout Voltage Load Regulation Line Regulation Quiescent Current Ripple Rejection High Low High Low High Low High Low SYMBOL VOUT VD ΔVOUT ΔVOUT IQ RR VDISH VDISL IDISH IDISL SYMBOL VOUT VD ΔVOUT ΔVOUT IQ RR VDISH VDISL IDISH IDISL LINEAR INTEGRATED CIRCUIT CONDITIONS VIN = 11V IOUT = 1A 5mA < IOUT < 1A 10V < VIN < 25V IOUT = 0 A (Note) Output Active Output Disabled VDIS = 2.7V VDIS = 0.4V CONDITIONS VIN =14V IOUT = 1A 5mA < IOUT < 1A 13 V < VIN < 25V IOUT = 0 A (Note) Output Active Output Disabled VDIS = 2.7V VDIS = 0.4V MIN 8.78 TYP 9 0.1 0.5 45 2.0 55 MAX UNITS 9.22 V 0.5 V 2.0 ％ 2.5 ％ 10 mA Db V 0.8 V 0.02 mA -0.4 mA MAX UNITS 12.29 V 0.5 V 2.0 ％ 2.5 ％ 10 mA Db V 0.8 V 0.02 mA -0.4 mA MAX UNITS 1.28 V 0.5 V 2.0 ％ 2.5 % 10 mA dB V 0.8 V 0.02 mA -0.4 mA MIN 11.71 TYP 12 0.1 0.5 45 2.0 55 SYMBOL CONDITIONS VOUT VD IOUT = 1A ΔVOUT 5mA < IOUT < 1A ΔVOUT Vo+1V< VIN < Vo+7V IQ IOUT = 0 A RR (Note) High VDISH Output Active Disable Voltage Output Disabled Low VDISL High IDISH VDIS = 2.7V Disable Bias Current Low IDISL VDIS = 0.4V Note: These guaranteed parameters, are not 100% tested in production. MIN 1.22 TYP 1.25 0.1 0.5 45 2.0 55 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 12 QW-R102-035.E 78RXX TYPICAL APPLICATION CIRCUIT Fixed Output Voltage Versions LINEAR INTEGRATED CIRCUIT * CI is required if regulator is located an appreciable distance from power supply filter. [CI > 0.33μF (Electrolytic)] * Co improves stability and transient response. [CO > 47μF(Electrolytic)] Adjustable Output Voltage Version * CI is required if regulator is located an appreciable distance from power supply filter. [CI > 0.33μF (Electrolytic)] * Co improves stability and transient response. [CO > 47μF(Electrolytic)] UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw + + 7 of 12 QW-R102-035.E (1) 78R33 78RXX Output Voltage, VOUT (V) Output Voltage, VOUT (V) Output Voltage, VOUT (V) TYPICAL CHARACTERISTICS UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw Relative Output Voltage, (％) Quiescent Current, IQ (mA) Quescent Current, IQ (mA) LINEAR INTEGRATED CIRCUIT 8 of 12 QW-R102-035.E 78RXX TYPICAL CHARACTERISTICS(Cont.) LINEAR INTEGRATED CIRCUIT (2) 78R05 Output Voltage vs Input Voltage 7 6 5 30 Output Peak Current, IOP (A) Quiescent Current vs Input Voltage RL=∞ 4 3 2 1 0 0 5 Quiescent Current, IQ (mA) Output Voltage, VOUT (V) 25 RL=5Ω 20 15 10 5 0 RL= ∞ 10 15 0 5 10 15 20 25 Input Voltage, VIN (V) Input Voltage, VIN (V) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw Relative Output Voltage, (％) Output Voltage, VOUT (V) 9 of 12 QW-R102-035.E 78RXX TYPICAL CHARACTERISTICS(Cont.) Output Voltage vs Temperature 5.06 5.04 LINEAR INTEGRATED CIRCUIT Quescent Current vs Temperature 10 Quescent Current, IQ (mA) -25 0 25 50 75 100 125 Output Voltage, VOUT (V) 8 5.02 5.00 4.98 4.96 4.94 4.92 6 4 2 0 -25 0 25 50 75 100 125 Junction Temperature,TJ (°С) Junction Temperature,TJ (°С) (3) 78R09 Output Peak Current, IOP (A) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw Quiescent Current, IQ (mA) Output Voltage, VOUT (V) 10 of 12 QW-R102-035.E 78RXX TYPICAL CHARACTERISTICS(Cont.) Output Voltage vs Disable Voltage 10 9 100 LINEAR INTEGRATED CIRCUIT Overcurrent Protection Characteristics Relative Output Voltage, (%) Output Voltage, VOUT (V) 8 7 6 5 4 3 2 1 0 0 0.5 1 1.5 2 2.5 3 80 60 40 20 0 0 0.5 1.0 1.5 2.0 2.5 3.0 Disable Voltage, VDIS (V) Output Voltage vs Temperature 9.06 10 9.04 Output Current, IOUT (A) Quescent Current vs Temperature Quescent Current, IQ (mA) -25 Output Voltage, VOUT (V) 8 9.02 9.00 8.98 8.96 8.94 8.92 0 25 50 75 100 125 6 4 2 0 -25 0 25 50 75 100 125 Junction Temperature, TJ (°С) Junction Temperature, TJ (°С) Output Peak Current, IO(PEAK) (A) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 11 of 12 QW-R102-035.E 78RXX LINEAR INTEGRATED CIRCUIT U TC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 12 of 12 QW-R102-035.E