BC808

UTC BC807/BC808 PNP EPITAXIAL SILICON TRANSISTOR SWITCHING AND AMPLIFIER APPLICATIONS FEATURES *Suitable for AF-Driver stages and low power output stages *Complement to BC817 / BC818 2 1 3 SOT-23 1: EMITTER 2: BASE 3: COLLECTOR ABSOLUTE MAXIMUM RATINGS (Ta=25°C, unless otherwise noted) PARAMETER Collector-Emitter Voltage BC807 BC808 Collector-Emitter Voltage BC807 BC808 Emitter-Base Voltage Collector Current (DC) Collector Dissipation Junction Temperature Storage Temperature SYMBOL VCES VALUE -50 -30 UNIT V V V V V mA mW °C °C VCE0 -45 -25 -5 -800 -310 150 -65 to +150 VEBO Ic Pc Tj Tstg ELECTRICAL CHARACTERISTICS (Ta=25°C, unless otherwise noted) PARAMETER Collector-Emitter Breakdown Voltage BC807 BC808 Collector-Emitter Breakdown Voltage BC807 BC808 Emitter-Base Breakdown Voltage Collector Cut-off Current Emitter Cut-off Current SYMBOL BVCEO TEST CONDITIONS Ic=-10mA, IB=0 MIN -45 -25 TYP MAX UNIT V V V V V nA nA BVCES IC=-0.1mA, VBE=0 -50 -30 -5 -100 -100 BVEBO ICES IEBO IE=-0.1mA, Ic=0 VCE=-25V, VBE=0 VEB=-4V, Ic=0 UTC UNISONIC TECHNOLOGIES CO. LTD 1 QW-R206-026,A UTC BC807/BC808 PARAMETER DC Current Gain Collector-Emitter Saturation Voltage Base-Emitter On Voltage Current Gain Bandwidth Product Output Capacitance PNP EPITAXIAL SILICON TRANSISTOR SYMBOL hFE1 hFE2 VCE(sat) VBE(on) fT Cob TEST CONDITIONS Ic=-100mA, VCE=-1V Ic=-300mA, VCE=-1V Ic=-500mA, IB=-50mA Ic=-300mA, VCE=-1V VCE=-5V, Ic=-10mA, f=50MHz VCB=-10V, f=1MHz MIN 100 60 TYP MAX 630 -0.7 -1.2 UNIT 100 12 V V MHz pF Classification of hFE RANK hFE1 hFE2 Marking Code TYPE MARK 807-16 9FA 807-25 9FB 16 100-250 60- 25 160-400 100- 40 250-630 170- 807-40 9FC 808-16 9GA 808-25 9GB 808-40 9GC UTC UNISONIC TECHNOLOGIES CO. LTD 2 QW-R206-026,A UTC BC807/BC808 TYPICAL CHARACTERISTICS PNP EPITAXIAL SILICON TRANSISTOR UTC UNISONIC TECHNOLOGIES CO. LTD 3 QW-R206-026,A UTC BC807/BC808 PNP EPITAXIAL SILICON TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UTC UNISONIC TECHNOLOGIES CO. LTD 4 QW-R206-026,A