BU931-T3P-T

UNISONIC TECHNOLOGIES CO., LTD BU931Z NPN POWER DARLINGTON FEATURES * High operating junction temperature * High voltage ignition coil driver * Very rugged bipolar technology NPN SILICON TRANSISTOR 1 TO-3P INTERNAL SCHEMATIC DIAGRAM C B (1) (2) *Pb-free plating product number: BU931L E (3) ORDERING INFORMATION Ordering Number Normal Lead Free Plating BU931-T3P-T BU931L-T3P-T Package TO-3P Pin Assignment 1 2 3 B C E Packing Tube BU931L-T3P-T (1)Packing Type (2)Package Type (3)Lead Plating (1) T: Tube (2) T3P: TO-3P (3) L: Lead Free Plating, Blank: Pb/Sn www.unisonic.com.tw Copyright © 2007 Unisonic Technologies Co., Ltd 1 of 2 QW-R214-015,A BU931Z ABSOLUTE MAXIMUM RATINGS (Ta=25℃) PARAMETER Collector-Emitter Voltage Emitter-Base Voltage Collector Current (DC) Collector Peak Current Base Current Base Peak Current Total Dissipation (Tc = 25 ℃) Junction Temperature Storage Temperature SYMBOL BVCEO BVEBO IC ICM IB IBM PD TJ TSTG NPN SILICON TRANSISTOR RATINGS 350 5 10 15 1 5 125 +175 -65 ~ +175 UNIT V V A A A A W ℃ ℃ ELECTRICAL CHARACTERISTICS PARAMETER Collector Cut-off Current Emitter Cut-off Current Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage DC Current Gain Diode Forward Voltage Inductive Load Storage Time / Fall Time tF SYMBOL ICEO IEBO VCL VCE(SAT)1 VCE(SAT)2 VBE(SAT)1 VBE(SAT)2 hFE VF tS TEST CONDITIONS VCE = 300 V VEB = 5 V IC = 100mA IC = 7 A, IB = 70 mA IC = 8 A, IB = 100 mA IC = 7 A, IB = 70 mA IC = 8 A, IB = 100 mA VCE = 10 V, IC = 5 A IF = 8 A VCC = 12 V, Vclamp = 300 V L = 7 mH IC = 7 A, IB = 70 mA VBE = 0, RBE = 47Ω MIN TYP MAX UNIT 100 µA 20 mA 500 V 1.6 V 1.8 V 2.2 V 2.4 V 2.5 15 0.5 V µs µs 350 300 Note: 1. Wafer area should be than 50% 2.The quantity of cracked wafers should be less than 10% per shipment. 3.Auerage yield should be more than 50% per wafer, 80% per shipment. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 2 QW-R214-015,A