BYC8-600

UNISONIC TECHNOLOGIES CO., LTD Preliminary BYC8-600 ULTRAFAST, LOW SWITCHING LOSS RECTIFIER DIODE DESCRIPTION The UTC BYC8-600 is a rectifier diode. It provides the designers with ultra-fast switching and low switching loss in associated MOSFET. The UTC BYC8-600 is generally applied in continuous current mode(CCM), power factor correction (PFC), half-bridge lighting ballasts and half-bridge/full-bridge switched mode power supplies. DIODE FEATURES * Low Reverse Recovery Current * Ultra-Fast Switching * Low Switching Loss In Associated MOSFET * Low Thermal Resistance SYMBOL ORDERING INFORMATION Ordering Number Package Lead Free Plating Halogen Free BYC8L-600-TA2-T BYC8G-600-TA2-T TO-220-2 Note: Pin Assignment: A: Anode, K: Cathode, Tab: Mounting Base Pin Assignment 1 2 Tab K A K Packing Tube www.unisonic.com.tw Copyright © 2010 Unisonic Technologies Co., Ltd 1 of 3 QW-R601-025.b BYC8-600 Preliminary DIODE ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATINGS UNIT Peak Repetitive Reverse Voltage VRRM 600 V Crest Working Reverse Voltage VRWM 600 V square-wave pulse;δ =0.5; IF(AV) Average Forward Current 8 A TTab ≤109°C square-wave pulse; δ =0.5; IFRM Repetitive Peak Forward Current 16 A tP = 25µs, TTab ≤109°C tP=8.3ms,sine-wave 60 A pulse;TJ =150°C IFSM Non-Repetitive Peak Forward Current. tP=10ms,sine-wave 55 A pulse;TJ =150°C Operating Junction Temperature TJ 150 °C Storage Temperature TSTG -40 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient Junction to Tab SYMBOL θJA θJB RATINGS 60 2.2 UNIT K/W K/W ELECTRICAL CHARACTERISTICS (TJ =25°C, unless otherwise specified) PARAMETER Forward Voltage Reverse Current Recovered Charge Reverse Recovery Time SYMBOL VF IR QR tRR Peak Reverse Recovery Current Forward Recovery Voltage IRM VFR TEST CONDITIONS MIN TYP MAX UNIT IF =8A, TJ =25°C 2 2.9 V IF =8A, TJ =150°C 1.4 1.85 V IF =16A, TJ =150°C 1.7 2.3 V VR=600V 9 150 µA 1.1 3 mA VR=500V, TJ=100°C IF =1A, dIF/dt=100A/μs, TJ =25°C 12 nC IF =1A, VR=30V, dIF/dt=50A/μs, TJ =25°C 30 52 ns TJ=100°C 32 40 ns IF=8A,VR=400V, dIF/dt=500A/μs 19 ns TJ=25°C (See Figure1) IF=8A,VR=400V, dIF/dt=50A/μs, TJ=125°C 1.5 5.5 A 9.5 12 A IF=8A,VR=400V, dIF/dt=500A/μs, TJ=100°C IF =10A, dIF/dt=100A/μs(See Figure2) 8 10 V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 3 QW-R601-025.b BYC8-600 TYPICAL CHARACTERISTICS IF dIF dT Preliminary DIODE IF tRR time 25% QR 100% VF time Fig 1. Reverse Recovery Definitions; Ramp Recovery Fig 2. Forward Recovery Definitions VFRM time VF IR IRM U TC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-025.b