BYR29-600

UNISONIC TECHNOLOGIES CO., LTD Preliminary BYR29-600 RECTIFIER DIODE ULTRAFAST DESCRIPTION The UTC BYR29-600 is a rectifier diode and It provides the designers with ultra-fast switching and low switching loss. The UTC BYR29-600 is suitable for half-bridge lighting ballasts, half-bridge/full-bridge switched mode power supplies and active power factor correction. DIODE FEATURES * Low Reverse Recovery Current * Ultra-Fast Switching * Low Switching Loss * Low Thermal Resistance SYMBOL ORDERING INFORMATION Ordering Number Package Lead Free Plating Halogen Free BYR29L-600-TA2 -T BYR29G-600-TA2 -T TO-220AC Note: Pin Assignment: A: Anode, K: Cathode, Tab: Mounting Base Pin Assignment 1 2 Tab K A K Packing Tube www.unisonic.com.tw Copyright © 2010 Unisonic Technologies Co., Ltd 1 of 2 QW-R601-029.a BYR29-600 ABSOLUTE MAXIMUM RATINGS PARAMETER Peak Repetitive Reverse Voltage Crest Working Reverse Voltage Continuous Reverse Voltage Average Forward Current Repetitive Peak Forward Current Preliminary DIODE SYMBOL CONDITIONS RATINGS UNIT VRRM 600 V VRWM 600 V VR 600 V IF(AV) square wave; δ =0.5; TTab ≤115°C 8 A IFRM t = 25μs; δ =0.5; TTab ≤115°C 16 A t = 10ms 60 A Non-Repetitive Peak Forward Current. IFSM t = 8.3ms sinusoidal; 66 A with reapplied VRRM(max) Junction Temperature TJ 150 °C Storage Temperature TSTG -40 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient Junction to Tab SYMBOL θJA θJB RATINGS 60 2.5 UNIT K/W K/W ELECTRICAL CHARACTERISTICS (TJ =25°C, unless otherwise specified) PARAMETER Forward Voltage Reverse Current Reverse Recovery Charge Reverse Recovery Time Peak Reverse Recovery Current Forward Recovery Voltage SYMBOL VF IR QS tRR IRRM VFR TEST CONDITIONS MIN IF =8A, TJ =150°C IF =20A VR=VRRM, TJ =25°C VR= VRRM, TJ=100°C IF =2A ~ VR ≥30 V, dIF/dt =20A/μs IF =1A ~ VR ≥30 V, dIF/dt=100A/μs IF =10A ~VR ≥30 V, dIF/dt=50A/μs, TJ=100°C IF =10A, dIF/dt=10A/μs TYP MAX UNIT 1.07 1.50 V 1.75 1.95 V 1.0 10 µA 0.1 0.2 mA 150 200 nC 60 75 ns 6 A 5.0 V U TC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 2 QW-R601-029.a